Date: Mon, 5 Apr 2010 21:10:38 GMT From: Rene Ladan <rene@FreeBSD.org> To: Perforce Change Reviews <perforce@FreeBSD.org> Subject: PERFORCE change 176552 for review Message-ID: <201004052110.o35LAc6q009372@repoman.freebsd.org>
next in thread | raw e-mail | index | archive | help
http://p4web.freebsd.org/chv.cgi?CH=176552 Change 176552 by rene@rene_eee on 2010/04/05 21:10:24 IFC Affected files ... .. //depot/projects/docproj_nl/en_US.ISO8859-1/articles/contributors/contrib.additional.sgml#54 integrate .. //depot/projects/docproj_nl/en_US.ISO8859-1/articles/contributors/contrib.committers.sgml#41 integrate .. //depot/projects/docproj_nl/en_US.ISO8859-1/share/sgml/authors.ent#33 integrate .. //depot/projects/docproj_nl/nl_NL.ISO8859-1/books/handbook/advanced-networking/chapter.sgml#43 integrate .. //depot/projects/docproj_nl/nl_NL.ISO8859-1/books/handbook/mirrors/chapter.sgml#46 edit .. //depot/projects/docproj_nl/share/pgpkeys/jacula.key#1 branch .. //depot/projects/docproj_nl/share/pgpkeys/pgpkeys-developers.sgml#33 integrate .. //depot/projects/docproj_nl/share/pgpkeys/pgpkeys.ent#30 integrate .. //depot/projects/docproj_nl/www/en/developers.sgml#32 integrate .. //depot/projects/docproj_nl/www/en/donations/wantlist.sgml#17 integrate .. //depot/projects/docproj_nl/www/en/multimedia/multimedia-input.xml#7 integrate .. //depot/projects/docproj_nl/www/en/projects/ideas/ideas.xml#10 integrate .. //depot/projects/docproj_nl/www/en/releases/7.3R/errata.html#3 integrate .. //depot/projects/docproj_nl/www/en/releases/8.1R/Makefile#1 branch .. //depot/projects/docproj_nl/www/en/releases/8.1R/docbook.css#1 branch .. //depot/projects/docproj_nl/www/en/releases/8.1R/schedule.sgml#1 branch .. //depot/projects/docproj_nl/www/en/releases/Makefile#6 integrate .. //depot/projects/docproj_nl/www/en/releng/index.sgml#35 integrate .. //depot/projects/docproj_nl/www/en/security/security.sgml#12 integrate .. //depot/projects/docproj_nl/www/share/sgml/news.xml#73 integrate .. //depot/projects/docproj_nl/www/share/sgml/usergroups.xml#11 integrate Differences ... ==== //depot/projects/docproj_nl/en_US.ISO8859-1/articles/contributors/contrib.additional.sgml#54 (text+ko) ==== @@ -1,4 +1,4 @@ -<!-- $FreeBSD: doc/en_US.ISO8859-1/articles/contributors/contrib.additional.sgml,v 1.906 2010/03/25 07:27:28 niels Exp $ --> +<!-- $FreeBSD: doc/en_US.ISO8859-1/articles/contributors/contrib.additional.sgml,v 1.908 2010/04/05 17:09:48 jacula Exp $ --> <!-- NOTE TO COMMITTERS: Contributors lists are sorted in alphabetical order by first name. @@ -1172,11 +1172,6 @@ </listitem> <listitem> - <para>Bernhard Froehlich - <email>decke@bluelife.at</email></para> - </listitem> - - <listitem> <para>bf <email>bf2006a@yahoo.com</email></para> </listitem> @@ -4008,11 +4003,6 @@ </listitem> <listitem> - <para>Jacula Modyun - <email>jacula@gmail.com</email></para> - </listitem> - - <listitem> <para>Jagane D Sundar <email>jagane@netcom.com</email></para> </listitem> ==== //depot/projects/docproj_nl/en_US.ISO8859-1/articles/contributors/contrib.committers.sgml#41 (text+ko) ==== @@ -1,4 +1,4 @@ -<!-- $FreeBSD: doc/en_US.ISO8859-1/articles/contributors/contrib.committers.sgml,v 1.288 2010/03/07 20:34:00 niels Exp $ --> +<!-- $FreeBSD: doc/en_US.ISO8859-1/articles/contributors/contrib.committers.sgml,v 1.290 2010/04/05 17:09:49 jacula Exp $ --> <!-- NOTE TO NEW COMMITTERS: Core and committers lists are sorted in alphabetical order by last name. Please keep in mind that fact while @@ -439,6 +439,10 @@ </listitem> <listitem> + <para>&a.decke;</para> + </listitem> + + <listitem> <para>&a.shige;</para> </listitem> @@ -1151,6 +1155,10 @@ </listitem> <listitem> + <para>&a.jacula;</para> + </listitem> + + <listitem> <para>&a.piso;</para> </listitem> ==== //depot/projects/docproj_nl/en_US.ISO8859-1/share/sgml/authors.ent#33 (text+ko) ==== @@ -13,7 +13,7 @@ builds for the other languages, and we will poke fun of you in public. - $FreeBSD: doc/en_US.ISO8859-1/share/sgml/authors.ent,v 1.499 2010/03/04 02:08:02 neel Exp $ + $FreeBSD: doc/en_US.ISO8859-1/share/sgml/authors.ent,v 1.501 2010/04/05 17:09:49 jacula Exp $ --> <!ENTITY a.aaron "Aaron Dalton <email>aaron@FreeBSD.org</email>"> @@ -264,6 +264,8 @@ <!ENTITY a.dec "David E. Cross <email>dec@FreeBSD.org</email>"> +<!ENTITY a.decke "Bernhard Fröhlich <email>decke@FreeBSD.org</email>"> + <!ENTITY a.deischen "Daniel Eischen <email>deischen@FreeBSD.org</email>"> <!ENTITY a.delphij "Xin Li <email>delphij@FreeBSD.org</email>"> @@ -466,6 +468,8 @@ <!ENTITY a.iwasaki "Mitsuru IWASAKI <email>iwasaki@FreeBSD.org</email>"> +<!ENTITY a.jacula "Giuseppe Pilichi <email>jacula@FreeBSD.org</email>"> + <!ENTITY a.jadawin "Philippe Audeoud <email>jadawin@FreeBSD.org</email>"> <!ENTITY a.jake "Jake Burkholder <email>jake@FreeBSD.org</email>"> ==== //depot/projects/docproj_nl/nl_NL.ISO8859-1/books/handbook/advanced-networking/chapter.sgml#43 (text+ko) ==== @@ -1,10 +1,10 @@ <!-- The FreeBSD Dutch Documentation Project - $FreeBSD: doc/nl_NL.ISO8859-1/books/handbook/advanced-networking/chapter.sgml,v 1.18 2010/01/15 18:36:21 rene Exp $ + $FreeBSD: doc/nl_NL.ISO8859-1/books/handbook/advanced-networking/chapter.sgml,v 1.19 2010/04/03 21:27:04 rene Exp $ %SOURCE% en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml - %SRCID% 1.426 + %SRCID% 1.428 --> <chapter id="advanced-networking"> @@ -917,8 +917,11 @@ <para>In de rest van dit document zal een &man.ath.4; apparaat gebruikt worden, de naam van het apparaat in de voorbeelden dient aangepast te worden aan de lokale installatie. Een - lijst van beschikbare draadloze stuurprogramma's staat aan - begin van de hulppagina &man.wlan.4;. Indien er geen + lijst van beschikbare draadloze stuurprogramma's en ondersteunde + adapters staat in de &os; Hardware Notes. Kopieën hiervan + voor verschillende uitgaven en architecturen zijn beschikbaar op + de <ulink url="http://www.FreeBSD.org/releases/index.html">Uitgave + Informatie</ulink> pagina van de &os; website. Indien er geen origineel stuurprogramma voor het draadloze apparaat bestaat, is het mogelijk om te proberen om direct het stuurprogramma van &windows; proberen te gebruiken met @@ -926,8 +929,8 @@ linkend="config-network-ndis">NDIS</link>.</para> </note> - <para>Nadat het apparaatstuurprogramma is ingesteld is het ook - nodig om de ondersteuning voor 802.11-netwerken waarvan het + <para>Nadat het apparaatstuurprogramma is ingesteld onder &os; 7.X + is het ook nodig om de ondersteuning voor 802.11-netwerken waarvan het stuurprogramma gebruik maakt in te stellen. Voor het stuurprogramma &man.ath.4; zijn dit minimaal de modules &man.wlan.4;, <literal>wlan_scan_ap</literal> en @@ -940,12 +943,9 @@ <programlisting>wlan_scan_ap_load="YES" wlan_scan_sta_load="YES"</programlisting> - <note> - <para>Zowel <literal>wlan_scan_ap</literal> en - <literal>wlan_scan_sta</literal> zijn nodig voor - &os; 7.X, voor andere versies van &os; zijn ze niet - nodig.</para> - </note> + <para>Sinds &os; 8.0 zijn deze modules deel van het + basisstuurprogramma &man.wlan.4; dat dynamisch met het stuurprogramma + voor de adapter wordt geladen.</para> <para>Daarvoor zijn ook de modules nodig die cryptografische ondersteuning implementeren voor de te gebruiken @@ -981,21 +981,22 @@ volgende regels aan het kernelinstellingenbestand toe te voegen:</para> - <programlisting>device ath # Atheros IEEE 802.11 stuurprogramma voor draadloze netwerken -device ath_hal # Atheros Hardware Access Layer -options AH_SUPPORT_AR5146 # zet AR5146 tx/rx descriptors aan -device ath_rate_sample # SampleRate verzendsnelheid-controle voor ath -device wlan # 802.11 ondersteuning -device wlan_scan_ap # 802.11 AP-modus scannen -device wlan_scan_sta # 802.11 STA-modus scannen + <programlisting>device wlan # 802.11 ondersteuning device wlan_wep # 802.11 WEP-ondersteuning device wlan_ccmp # 802.11 CCMP-ondersteuning -device wlan_tkip # 802.11 TKIP-ondersteuning</programlisting> +device wlan_tkip # 802.11 TKIP-ondersteuning +device wlan_amrr # AMRR controle-algoritme voor zendsnelheid +device ath # Atheros PCI/Cardbus netwerkkaarten +device ath_hal # Ondersteuning voor PCI/cardbus chips +options AH_SUPPORT_AR5146 # zet AR5146 tx/rx descriptors aan +device ath_rate_sample # SampleRate verzendsnelheid-controle voor ath</programlisting> - <para>Zowel <literal>wlan_scan_ap</literal> en - <literal>wlan_scan_sta</literal> zijn nodig voor + <para>Beide van de volgende regels zijn nodig voor &os; 7.X, voor andere versies van &os; zijn ze niet - nodig.</para> + nodig:</para> + + <programlisting>device wlan_scan_ap # 802.11 AP mode scanning +device wlan_scan_sta # 802.11 STA mode scanning</programlisting> <para>Met deze informatie in het kernelinstellingenbestand kan de kernel opnieuw gecompileerd en de &os;-computer opnieuw @@ -1035,10 +1036,11 @@ moet zoeken. Alleen de super-gebruiker kan zo'n scan opzetten:</para> - <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable> up scan</userinput> + <screen>&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable></userinput> +&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> up scan</userinput> SSID BSSID CHAN RATE S:N INT CAPS -dlinkap 00:13:46:49:41:76 6 54M 29:3 100 EPS WPA WME -freebsdap 00:11:95:c3:0d:ac 1 54M 22:1 100 EPS WPA</screen> +dlinkap 00:13:46:49:41:76 11 54M -90:96 100 EPS WPA WME +freebsdap 00:11:95:c3:0d:ac 1 54M -83:96 100 EPS WPA</screen> <note> <para>De interface dient als up te worden gemarkeerd @@ -1046,6 +1048,20 @@ niet nodig om de interface als up te markeren.</para> </note> + <note> + <para>In &os; 7.X wordt de apparaat-adapter, bijvoorbeeld + <devicename><replaceable>ath0</replaceable></devicename>, + direct gebruikt in plaats van het apparaat + <devicename>wlan</devicename>. Hierom is het nodig om beide + vorige regels te vervangen door:</para> + + <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable> up scan</userinput></screen> + + <para>In de rest van dit document dient de gebruiker van + &os; 7.X de opdracht- en instellingregels volgens dat schema + aan te passen.</para> + </note> + <para>De uitvoer van een scanverzoek vermeld elk gevonden BSS/IBSS-netwerk. Naast de naam van het netwerk, <literal>SSID</literal>, staat het <literal>BSSID</literal>, @@ -1117,7 +1133,7 @@ <para>Het is ook mogelijk om de huidige lijst van bekende netwerken weer te geven met:</para> - <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable> list scan</userinput></screen> + <screen>&prompt.root; <userinput>ifconfig <replaceable>scan0</replaceable> list scan</userinput></screen> <para>Deze informatie kan automatisch bijgewerkt worden door de adapter of handmatig met een <option>scan</option> @@ -1151,13 +1167,22 @@ wordt ingesteld door het te noemen in <filename>/etc/rc.conf</filename>, bijvoorbeeld:</para> - <programlisting>ifconfig_ath0="DHCP"</programlisting> + <programlisting>wlans_ath0="wlan0" +ifconfig_wlan0="DHCP"</programlisting> + + <note> + <para>Zoals eerder vermeld, is voor &os; 7.X alleen een + regel nodig voor de apparaat-adapter:</para> + + <programlisting>ifconfig_ath0="DHCP"</programlisting> + </note> <para>Indien er meerdere toegangspunten zijn en het gewenst is om een specifieke te kiezen, kan dit met het SSID: </para> - <programlisting>ifconfig_ath0="ssid <replaceable>uw_ssid_hier</replaceable> DHCP"</programlisting> + <programlisting>wlans_ath0="wlan0" +ifconfig_wlan0="ssid <replaceable>uw_ssid_hier</replaceable> DHCP"</programlisting> <para>In een omgeving waar meerdere toegangspunten hetzelfde SSID hebben (vaak gedaan om roamen eenvoudiger te maken) @@ -1166,7 +1191,8 @@ BSSID van het toegangspunt gespecificeerd worden (het SSID kan ook weggelaten worden):</para> - <programlisting>ifconfig_ath0="ssid <replaceable>uw_ssid_hier</replaceable> bssid <replaceable>xx:xx:xx:xx:xx:xx</replaceable> DHCP</programlisting> + <programlisting>wlans_ath0="wlan0" +ifconfig_wlan0="ssid <replaceable>uw_ssid_hier</replaceable> bssid <replaceable>xx:xx:xx:xx:xx:xx</replaceable> DHCP</programlisting> <para>Er zijn andere manieren om de keuze van een toegangspunt te beperken zoals het beperken van het aantal @@ -1176,7 +1202,8 @@ tot een specifieke band te beperken kan de parameter <option>mode</option> gebruikt worden; bijvoorbeeld:</para> - <programlisting>ifconfig_ath0="mode <replaceable>11g</replaceable> ssid <replaceable>uw_ssid_hier</replaceable> DHCP"</programlisting> + <programlisting>wlans_ath0="wlan0" +ifconfig_wlan0="mode <replaceable>11g</replaceable> ssid <replaceable>uw_ssid_hier</replaceable> DHCP"</programlisting> <para>zal de kaart forceren om te werken in 802.11g welke alleen voor 2,4GHz frequenties is gedefinieerd dus de 5GHz @@ -1222,7 +1249,8 @@ toegang met zoiets als het volgende worden ingesteld:</para> - <programlisting>ifconfig_ath0="authmode shared wepmode on weptxkey <replaceable>1</replaceable> wepkey <replaceable>01234567</replaceable> DHCP"</programlisting> + <programlisting>wlans_ath0="wlan0" +ifconfig_wlan0="authmode shared wepmode on weptxkey <replaceable>1</replaceable> wepkey <replaceable>01234567</replaceable> DHCP"</programlisting> <para>Over het algemeen dient authenticatie via gedeelde sleutels worden voorkomen omdat het het materiaal van de @@ -1250,7 +1278,8 @@ apparaat toegevoegd te worden zoals in de verschillende bovenstaande voorbeelden is laten zien:</para> - <programlisting>ifconfig_ath0="DHCP"</programlisting> + <programlisting>wlans_ath0="wlan0" +ifconfig_wlan0="DHCP"</programlisting> <para>Op dit moment kan de draadloze interface geactiveerd worden:</para> @@ -1262,23 +1291,24 @@ van de interface <devicename>ath0</devicename> te zien:</para> - <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable></userinput> -ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 - inet6 fe80::211:95ff:fed5:4362%ath0 prefixlen 64 scopeid 0x1 - inet 192.168.1.100 netmask 0xffffff00 broadcast 192.168.1.255 + <screen>&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable></userinput> +wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 00:11:95:d5:43:62 - media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/54Mbps) + inet 192.168.1.00 netmask 0xffffff00 broadcast 192.168.1.255 + media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11g status: associated - ssid dlinkap channel 6 bssid 00:13:46:49:41:76 - authmode OPEN privacy OFF txpowmax 36 protmode CTS bintval 100</screen> + ssid dlinkap channel 11 (2462 Mhz 11g) bssid 00:13:46:49:41:76 + country US ecm authmode OPEN privacy OFF txpower 21.5 bmiss 7 + scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7 + roam:rate 5 protmode CTS wme burst</screen> <para>Het <literal>status: associated</literal> betekent dat er verbinding is met een draadloos netwerk (in dit geval met het netwerk <literal>dlinkap</literal>). Het gedeelte <literal>bssid 00:13:46:49:41:76</literal> is het - MAC-adres van het toegangspunt; de regel met + MAC-adres van het toegangspunt; de gedeelte met <literal>authmode</literal> vertelt dat de communicatie - niet versleuteld (<literal>OPEN</literal>) is.</para> + niet versleuteld is.</para> </sect5> <sect5> @@ -1292,7 +1322,8 @@ voor het selecteren van een toegangspunt behouden blijven:</para> - <programlisting>ifconfig_ath0="ssid <replaceable>uw_ssid_hier</replaceable> inet <replaceable>192.168.1.100</replaceable> netmask <replaceable>255.255.255.0</replaceable>"</programlisting> + <programlisting>wlans_ath0="wlan0" +ifconfig_wlan0="ssid <replaceable>uw_ssid_hier</replaceable> inet <replaceable>192.168.1.100</replaceable> netmask <replaceable>255.255.255.0</replaceable>"</programlisting> </sect5> </sect4> @@ -1372,27 +1403,29 @@ gebeuren en dat het IP-adres met DHCP zal worden verkregen:</para> - <programlisting>ifconfig_ath0="WPA DHCP"</programlisting> + <programlisting>wlans_ath0="wlan0" +ifconfig_wlan0="WPA DHCP"</programlisting> <para>Hierna kan de interface geactiveerd worden:</para> <screen>&prompt.root; <userinput><filename>/etc/rc.d/netif</filename> start</userinput> Starting wpa_supplicant. -DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 5 -DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 6 +DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 5 +DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 6 DHCPOFFER from 192.168.0.1 -DHCPREQUEST on ath0 to 255.255.255.255 port 67 +DHCPREQUEST on wlan0 to 255.255.255.255 port 67 DHCPACK from 192.168.0.1 bound to 192.168.0.254 -- renewal in 300 seconds. -ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 - inet6 fe80::211:95ff:fed5:4362%ath0 prefixlen 64 scopeid 0x1 +wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 + ether 00:11:95:d5:43:62 inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255 - ether 00:11:95:d5:43:62 - media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/36Mbps) + media: IEEE 802.11 Wireless Ethernet OFDM/36Mbps mode 11g status: associated - ssid freebsdap channel 1 bssid 00:11:95:c3:0d:ac - authmode WPA privacy ON deftxkey UNDEF TKIP 2:128-bit txpowmax 36 - protmode CTS roaming MANUAL bintval 100</screen> + ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac + country US ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF + AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan + bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS + wme burst roaming MANUAL</screen> <para>Ook kan gepoogd worden dit handmatig in te stellen door hetzelfde @@ -1400,34 +1433,36 @@ linkend="network-wireless-wpa-wpa-psk">hierboven</link> te gebruiken, en dit te draaien:</para> - <screen>&prompt.root; <userinput>wpa_supplicant -i <replaceable>ath0</replaceable> -c /etc/wpa_supplicant.conf</userinput> + <screen>&prompt.root; <userinput>wpa_supplicant -i <replaceable>wlan0</replaceable> -c /etc/wpa_supplicant.conf</userinput> Trying to associate with 00:11:95:c3:0d:ac (SSID='freebsdap' freq=2412 MHz) Associated with 00:11:95:c3:0d:ac -WPA: Key negotiation completed with 00:11:95:c3:0d:ac [PTK=TKIP GTK=TKIP]</screen> +WPA: Key negotiation completed with 00:11:95:c3:0d:ac [PTK=CCMP GTK=CCMP] +CTRL-EVENT-CONNECTED - Connection to 00:11:95:c3:0d:ac completed (auth) [id=0 idstr=]</screen> <para>De volgende stap is het lanceren van het commando <command>dhclient</command> om een IP-adres van de DHCP-server te krijgen:</para> - <screen>&prompt.root; <userinput>dhclient <replaceable>ath0</replaceable></userinput> -DHCPREQUEST on ath0 to 255.255.255.255 port 67 + <screen>&prompt.root; <userinput>dhclient <replaceable>wlan0</replaceable></userinput> +DHCPREQUEST on wlan0 to 255.255.255.255 port 67 DHCPACK from 192.168.0.1 bound to 192.168.0.254 -- renewal in 300 seconds. -&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable></userinput> -ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 - inet6 fe80::211:95ff:fed5:4362%ath0 prefixlen 64 scopeid 0x1 +&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable></userinput> +wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 + ether 00:11:95:d5:43:62 inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255 - ether 00:11:95:d5:43:62 - media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/48Mbps) + media: IEEE 802.11 Wireless Ethernet OFDM/36Mbps mode 11g status: associated - ssid freebsdap channel 1 bssid 00:11:95:c3:0d:ac - authmode WPA privacy ON deftxkey UNDEF TKIP 2:128-bit txpowmax 36 - protmode CTS roaming MANUAL bintval 100</screen> + ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac + country US ecm authmode WPA2/802.11i privacy ON defxkey UNDEF + AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan + bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS + wme burst roaming MANUAL</screen> <note> <para>Indien <filename>/etc/rc.conf</filename> is ingesteld met de regel - <literal>ifconfig_ath0="DHCP"</literal> is het niet + <literal>ifconfig_wlan0="DHCP"</literal> is het niet nodig om het commando <command>dhclient</command> handmatig te draaien, <command>dhclient</command> zal dan gedraaid worden nadat @@ -1440,18 +1475,18 @@ nadat <command>wpa_supplicant</command> het station heeft geauthenticeerd:</para> - <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable> inet <replaceable>192.168.0.100</replaceable> netmask <replaceable>255.255.255.0</replaceable></userinput> -&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable></userinput> -ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 - inet6 fe80::211:95ff:fed5:4362%ath0 prefixlen 64 scopeid 0x1 + <screen>&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> inet <replaceable>192.168.0.100</replaceable> netmask <replaceable>255.255.255.0</replaceable></userinput> +&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable></userinput> +wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 + ether 00:11:95:d5:43:62 inet 192.168.0.100 netmask 0xffffff00 broadcast 192.168.0.255 - ether 00:11:95:d5:43:62 - media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/36Mbps) + media: IEEE 802.11 Wireless Ethernet OFDM/36Mbps mode 11g status: associated - ssid freebsdap channel 1 bssid 00:11:95:c3:0d:ac - authmode WPA privacy ON deftxkey UNDEF TKIP 2:128-bit txpowmax 36 - protmode CTS roaming MANUAL bintval 100</screen> - + ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac + country US ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF + AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan + bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS + wme burst roaming MANUAL</screen> <para>Indien DHCP niet wordt gebruikt, dienen ook de standaard gateway en de naamserver handmatig ingesteld te worden:</para> @@ -1562,29 +1597,31 @@ </callout> </calloutlist> - <para>Voeg vervolgens de volgende regel toe aan + <para>Voeg vervolgens de volgende regels toe aan <filename>/etc/rc.conf</filename>:</para> - <programlisting>ifconfig_ath0="WPA DHCP"</programlisting> + <programlisting>wlans_ath0="wlan0" +ifconfig_wlan0="WPA DHCP"</programlisting> <para>De volgende stap is het activeren van de interface met behulp van de faciliteit <filename>rc.c</filename>:</para> <screen>&prompt.root; <userinput>/etc/rc.d/netif start</userinput> Starting wpa_supplicant. -DHCPREQUEST on ath0 to 255.255.255.255 port 67 -DHCPREQUEST on ath0 to 255.255.255.255 port 67 +DHCPREQUEST on wlan0 to 255.255.255.255 port 67 +DHCPREQUEST on wlan0 to 255.255.255.255 port 67 DHCPACK from 192.168.0.20 bound to 192.168.0.254 -- renewal in 300 seconds. -ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 - inet6 fe80::211:95ff:fed5:4362%ath0 prefixlen 64 scopeid 0x1 +wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 + ether 00:11:95:d5:43:62 inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255 - ether 00:11:95:d5:43:62 - media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps) + media: IEEE 802.11 Wireless Ethernet DS/11Mbps mode 11g status: associated - ssid freebsdap channel 1 bssid 00:11:95:c3:0d:ac - authmode WPA2/802.11i privacy ON deftxkey UNDEF TKIP 2:128-bit - txpowmax 36 protmode CTS roaming MANUAL bintval 100</screen> + ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac + country US ecm authmode WPA/802.11i privacy ON deftxkey UNDEF + AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan + bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS + wme burst roaming MANUAL</screen> <para>Zoals eerder is laten zien, is het ook mogelijk om de interface handmatig te activeren met zowel de commando's @@ -1651,29 +1688,31 @@ </callout> </calloutlist> - <para>Ook dient de volgende regel toegevoegd te worden aan + <para>Ook dienen de volgende regels toegevoegd te worden aan <filename>/etc/rc.conf</filename>:</para> - <programlisting>ifconfig_ath0="WPA DHCP"</programlisting> + <programlisting>wlans_ath0="wlan0" +ifconfig_ath0="WPA DHCP"</programlisting> <para>De volgende stap is het activeren van de interface:</para> <screen>&prompt.root; <userinput>/etc/rc.d/netif start</userinput> Starting wpa_supplicant. -DHCPREQUEST on ath0 to 255.255.255.255 port 67 -DHCPREQUEST on ath0 to 255.255.255.255 port 67 -DHCPREQUEST on ath0 to 255.255.255.255 port 67 +DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 7 +DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 15 +DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 21 DHCPACK from 192.168.0.20 bound to 192.168.0.254 -- renewal in 300 seconds. -ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 - inet6 fe80::211:95ff:fed5:4362%ath0 prefixlen 64 scopeid 0x1 +wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 + ether 00:11:95:d5:43:62 inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255 - ether 00:11:95:d5:43:62 - media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps) + media: IEEE 802.11 Wireless Ethernet autoselect DS/11Mbps mode 11g status: associated - ssid freebsdap channel 1 bssid 00:11:95:c3:0d:ac - authmode WPA2/802.11i privacy ON deftxkey UNDEF TKIP 2:128-bit - txpowmax 36 protmode CTS roaming MANUAL bintval 100</screen> + ssid freebsdap channel 1 (2412 Mhz) bssid 00:11:95:c3:0d:ac + country US ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF + AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan + bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS + wme burst roaming MANUAL</screen> </sect5> <sect5 id="network-wireless-wpa-eap-peap"> @@ -1764,26 +1803,28 @@ <para>Het volgende dient te worden toegevoegd aan <filename>/etc/rc.conf</filename>:</para> - <programlisting>ifconfig_ath0="WPA DHCP"</programlisting> + <programlisting>wlans_ath0="wlan0" +ifconfig_wlan0="WPA DHCP"</programlisting> <para>Hierna kan de interface worden geactiveerd:</para> <screen>&prompt.root; <userinput>/etc/rc.d/netif start</userinput> Starting wpa_supplicant. -DHCPREQUEST on ath0 to 255.255.255.255 port 67 -DHCPREQUEST on ath0 to 255.255.255.255 port 67 -DHCPREQUEST on ath0 to 255.255.255.255 port 67 +DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 7 +DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 15 +DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 21 DHCPACK from 192.168.0.20 bound to 192.168.0.254 -- renewal in 300 seconds. -ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 - inet6 fe80::211:95ff:fed5:4362%ath0 prefixlen 64 scopeid 0x1 +wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 + ether 00:11:95:d5:43:62 inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255 - ether 00:11:95:d5:43:62 - media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps) + media: IEEE 802.11 Wireless Ethernet autoselect DS/11Mbps mode 11g status: associated - ssid freebsdap channel 1 bssid 00:11:95:c3:0d:ac - authmode WPA2/802.11i privacy ON deftxkey UNDEF TKIP 2:128-bit - txpowmax 36 protmode CTS roaming MANUAL bintval 100</screen> + ssid freebsdap channel 1 (2412 Mhz) bssid 00:11:95:c3:0d:ac + country US ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF + AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan + bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS + wme burst roaming MANUAL</screen> </sect5> </sect4> @@ -1798,7 +1839,8 @@ <para>WEP kan worden opgezet met <command>ifconfig</command>:</para> - <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable> ssid mijn_net wepmode on weptxkey 3 wepkey 3:0x3456789012 \ + <screen>&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable></userinput> +&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> ssid mijn_net wepmode on weptxkey 3 wepkey 3:0x3456789012 \ inet <replaceable>192.168.1.100</replaceable> netmask <replaceable>255.255.255.0</replaceable></userinput></screen> <itemizedlist> @@ -1848,7 +1890,7 @@ <para>Daarna:</para> - <screen>&prompt.root; <userinput>wpa_supplicant -i <replaceable>ath0</replaceable> -c /etc/wpa_supplicant.conf</userinput> + <screen>&prompt.root; <userinput>wpa_supplicant -i <replaceable>wlan0</replaceable> -c /etc/wpa_supplicant.conf</userinput> Trying to associate with 00:13:46:49:41:76 (SSID='dlinkap' freq=2437 MHz) Associated with 00:13:46:49:41:76</screen> </sect4> @@ -1866,12 +1908,12 @@ <para>Op machine <hostid>A</hostid>:</para> - <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable> ssid <replaceable>freebsdap</replaceable> mediaopt adhoc inet <replaceable>192.168.0.1</replaceable> netmask <replaceable>255.255.255.0</replaceable></userinput> -&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable></userinput> - ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 + <screen>&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable></userinput> +&prompt.root; <userinput> ifconfig <replaceable>wlan0</replaceable> ssid <replaceable>freebsdap</replaceable> mediaopt adhoc inet <replaceable>192.168.0.1</replaceable> netmask <replaceable>255.255.255.0</replaceable></userinput> +&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable></userinput> + wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 + ether 00:11:95:c3:0d:ac inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255 - inet6 fe80::211:95ff:fec3:dac%ath0 prefixlen 64 scopeid 0x4 - ether 00:11:95:c3:0d:ac media: IEEE 802.11 Wireless Ethernet autoselect <adhoc> (autoselect <adhoc>) status: associated ssid freebsdap channel 2 bssid 02:11:95:c3:0d:ac @@ -1885,19 +1927,19 @@ <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable> up scan</userinput> SSID BSSID CHAN RATE S:N INT CAPS - freebsdap 02:11:95:c3:0d:ac 2 54M 19:3 100 IS</screen> + freebsdap 02:11:95:c3:0d:ac 2 54M -90:-96 100 IS</screen> <para>De <literal>I</literal> in de uitvoer bevestigt dat machine <hostid>A</hostid> in ad-hoc-modus verkeert. Het is slechts nodig om <hostid>B</hostid> met een ander IP-adres in te stellen:</para> - <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable> ssid <replaceable>freebsdap</replaceable> mediaopt adhoc inet <replaceable>192.168.0.2</replaceable> netmask <replaceable>255.255.255.0</replaceable></userinput> -&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable></userinput> - ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 - inet6 fe80::211:95ff:fed5:4362%ath0 prefixlen 64 scopeid 0x1 + <screen>&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable></userinput> +&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> ssid <replaceable>freebsdap</replaceable> mediaopt adhoc inet <replaceable>192.168.0.2</replaceable> netmask <replaceable>255.255.255.0</replaceable></userinput> +&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable></userinput> + wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 + ether 00:11:95:d5:43:62 inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255 - ether 00:11:95:d5:43:62 media: IEEE 802.11 Wireless Ethernet autoselect <adhoc> (autoselect <adhoc>) status: associated ssid freebsdap channel 2 bssid 02:11:95:c3:0d:ac ==== //depot/projects/docproj_nl/nl_NL.ISO8859-1/books/handbook/mirrors/chapter.sgml#46 (text+ko) ==== @@ -1,11 +1,11 @@ <!-- The FreeBSD Dutch Documentation Project - $FreeBSD: doc/nl_NL.ISO8859-1/books/handbook/mirrors/chapter.sgml,v 1.35 2010/03/24 21:22:17 rene Exp $ + $FreeBSD: doc/nl_NL.ISO8859-1/books/handbook/mirrors/chapter.sgml,v 1.36 2010/03/30 12:19:50 rene Exp $ Vertaald door: Siebrand Mazeland / Rene Ladan %SOURCE% en_US.ISO8859-1/books/handbook/mirrors/chapter.sgml - %SRCID% 1.478 + %SRCID% 1.479 --> <appendix id="mirrors"> @@ -945,9 +945,7 @@ de applicatie standaard meegeleverd, oudere versies hebben dit echter niet, maar deze kunnen simpel de <filename role="package">net/csup</filename> port installeren - of een vooraf gecompileerd pakket. Als je echter complete - repositories wilt schaduwen, is <application>CVSup</application> - nog steeds noodzakelijk. Als ervoor gekozen is om + of een vooraf gecompileerd pakket. Als ervoor gekozen is om <application>csup</application> te gebruiken, sla dan de installatie stappen voor <application>CVSup</application> over en vervang de referenties naar <application>CVSup</application> ==== //depot/projects/docproj_nl/share/pgpkeys/pgpkeys-developers.sgml#33 (text+ko) ==== @@ -1,7 +1,7 @@ <!-- The FreeBSD Documentation Project - $FreeBSD: doc/share/pgpkeys/pgpkeys-developers.sgml,v 1.118 2010/02/06 18:08:09 bschmidt Exp $ + $FreeBSD: doc/share/pgpkeys/pgpkeys-developers.sgml,v 1.119 2010/04/05 17:09:49 jacula Exp $ --> <sect2 id="pgpkey-ariff"> @@ -1056,6 +1056,11 @@ &pgpkey.gerald; </sect2> + <sect2 id="pgpkey-jacula"> + <title>&a.jacula;</title> + &pgpkey.jacula; + </sect2> + <sect2 id="pgpkey-jdp"> <title>&a.jdp;</title> &pgpkey.jdp; ==== //depot/projects/docproj_nl/share/pgpkeys/pgpkeys.ent#30 (text+ko) ==== @@ -1,5 +1,5 @@ -<!-- $FreeBSD: doc/share/pgpkeys/pgpkeys.ent,v 1.210 2010/02/06 18:08:09 bschmidt Exp $ --> +<!-- $FreeBSD: doc/share/pgpkeys/pgpkeys.ent,v 1.211 2010/04/05 17:09:49 jacula Exp $ --> <!-- PGP keyblocks --> <!ENTITY pgpkey.aaron SYSTEM "aaron.key"> <!ENTITY pgpkey.ache SYSTEM "ache.key"> @@ -124,6 +124,7 @@ <!ENTITY pgpkey.imp SYSTEM "imp.key"> <!ENTITY pgpkey.itetcu SYSTEM "itetcu.key"> <!ENTITY pgpkey.ivoras SYSTEM "ivoras.key"> +<!ENTITY pgpkey.jacula SYSTEM "jacula.key"> <!ENTITY pgpkey.jadawin SYSTEM "jadawin.key"> <!ENTITY pgpkey.jamie SYSTEM "jamie.key"> <!ENTITY pgpkey.jcamou SYSTEM "jcamou.key"> ==== //depot/projects/docproj_nl/www/en/developers.sgml#32 (text+ko) ==== @@ -6,7 +6,7 @@ us to update author names, or the representation of those names (such as adding email addresses), by just editing a single file. -$FreeBSD: www/en/developers.sgml,v 1.242 2010/03/04 02:09:47 neel Exp $ +$FreeBSD: www/en/developers.sgml,v 1.244 2010/04/05 17:13:23 jacula Exp $ --> @@ -134,6 +134,7 @@ <!ENTITY a.dd "Dima Dorfman"> <!ENTITY a.dds "Diomidis D. Spinellis"> <!ENTITY a.dec "David E. Cross"> +<!ENTITY a.decke "Bernhard Fröhlich"> <!ENTITY a.deischen "Daniel Eischen"> <!ENTITY a.delphij "Xin Li"> <!ENTITY a.demon "Dmitry Sivachenko"> @@ -233,6 +234,7 @@ <!ENTITY a.itojun "Jun-ichiro Itoh"> <!ENTITY a.ivoras "Ivan Voras"> <!ENTITY a.iwasaki "Mitsuru IWASAKI"> +<!ENTITY a.jacula "Giuseppe Pilichi"> <!ENTITY a.jadawin "Philippe Audeoud"> <!ENTITY a.jake "Jake Burkholder"> <!ENTITY a.jamie "Jamie Gritton"> ==== //depot/projects/docproj_nl/www/en/donations/wantlist.sgml#17 (text+ko) ==== @@ -1,6 +1,6 @@ <!DOCTYPE HTML PUBLIC "-//FreeBSD//DTD HTML 4.01 Transitional-Based Extension//EN" [ <!ENTITY base CDATA ".."> -<!ENTITY date "$FreeBSD: www/en/donations/wantlist.sgml,v 1.482 2010/02/27 23:30:47 linimon Exp $"> +<!ENTITY date "$FreeBSD: www/en/donations/wantlist.sgml,v 1.483 2010/04/01 09:46:38 gahr Exp $"> <!ENTITY title "FreeBSD Developers Want List"> <!ENTITY email 'donations'> <!ENTITY % navinclude.about "INCLUDE"> @@ -411,15 +411,6 @@ </tr> <tr> - <td>thomas</td> - <td>France</td> - <td>UDMA controller, ATAPI floppy drive, ATAPI tape drive</td> - <td>Ensure these ATAPI devices work with ATAPI/CAM with the - same level of functionality currently available with the - afd/ast drivers.</td> - </tr> - - <tr> <td>tabthorpe</td> <td>Canada</td> <td>AMD64 machine, minimum 256 M memory, any size hard drive.</td> ==== //depot/projects/docproj_nl/www/en/multimedia/multimedia-input.xml#7 (text+ko) ==== @@ -4678,27 +4678,13 @@ <a href="http://Constantine.SU/">http://Constantine.SU/</a>; ]]></desc> <overview>http://2008.eurobsdcon.org/talks.html</overview>; - <tags>eurobsdcon,eurobsdcon2008,openbsd,hardware sensors,constantine murenin</tags> + <tags>eurobsdcon,eurobsdcon2008,presentation,openbsd,hardware sensors,constantine murenin</tags> <files> <file> - <url>http://audiovideocours.u-strasbg.fr/avc/courseaccess?id=2825&type=ogg</url>; - <desc>OGG</desc> - <size>1 byte</size> - <length>47 minutes</length> - <tags>ogg</tags> - </file> - <file> - <url>http://audiovideocours.u-strasbg.fr/avc/courseaccess?id=2825&type=mp3</url>; - <desc>MP3</desc> - <size>1 byte</size> - <length>47 minutes</length> - <tags>mp3</tags> - </file> - <file> - <url>http://audiovideocours.u-strasbg.fr/avc/courseaccess?id=2825&type=pdf</url>; + <url>http://www.openbsd.org/papers/eurobsdcon2008-sensors.pdf</url>; <desc>PDF</desc> - <size>1 byte</size> - <length>n pages</length> + <size>539395 bytes</size> + <length>38 pages</length> <tags>pdf</tags> </file> </files> @@ -6055,7 +6041,7 @@ <url>abc2009-P2A-paper.pdf</url> <size>401 Kb</size> <length>6 pages</length> - <desc>OpenBGPD - Bringing full views to OpenBSD since by 2004 Claudio Jeker</desc> + <desc>OpenBGPD - Bringing full views to OpenBSD since 2004 by Claudio Jeker</desc> <tags>pdf,paper,openbgpd,openbsd,claudio jeker</tags> </file> <file> @@ -6077,7 +6063,7 @@ <size>245 Kb</size> <length>14 pages</length> <desc>OpenBSD Hardware Sensors Framework by Constantine A. Murenin</desc> - <tags>pdf,paper,openbsd,hardware sensors framework,constantine murenin</tags> + <tags>pdf,paper,openbsd,hardware sensors,constantine murenin</tags> </file> <file> <url>abc2009-P4A-paper.pdf</url> @@ -9937,7 +9923,7 @@ </p><p> </p> ]]></desc> - <tags>bsdcan,bsdcan2009,presentation,bsd,hardware monitors,canstantine murenin</tags> + <tags>bsdcan,bsdcan2009,presentation,openbsd,hardware sensors,constantine murenin</tags> <files> <file> <url>http://www.bsdcan.org/2009/schedule/attachments/95_BSDCan2009.cnst-fanctl.slides.pdf</url>; ==== //depot/projects/docproj_nl/www/en/projects/ideas/ideas.xml#10 (text+ko) ==== @@ -15,7 +15,7 @@ <ideas> <cvs:keywords xmlns:cvs="http://www.FreeBSD.org/XML/CVS" version="1.0"> <cvs:keyword name="freebsd"> - $FreeBSD: www/en/projects/ideas/ideas.xml,v 1.160 2010/03/28 16:25:50 rwatson Exp $ + $FreeBSD: www/en/projects/ideas/ideas.xml,v 1.162 2010/04/02 09:28:32 pav Exp $ </cvs:keyword> </cvs:keywords> @@ -1242,31 +1242,6 @@ <category> <title>Ports</title> - <idea id="ports-db" class="soc"> - <title>Add .db support to pkg_tools</title> - - <desc> -<p>pkg_create(1) and friends use flat databases (aka ordinary - files and directories in /var/db/pkg) to maintain their data. This - makes it cumbersome and/or impossible to do efficient lookups of data - on installed packages and makes certain operations very slow. - portupgrade has the right idea of hashing this into a berkeley db - file, but it uses tools that are not in the base system (ruby).</p> -<p>A self-contained project would be to add similar (preferably - compatible) code into pkg_tools directly, possibly also extending - the data that is stored and allowing for more flexible querying with - tools like pkg_info (e.g. replicating the pkg_which utility of - portupgrade). Adding mutual exclusion to protect concurrent - pkg_add/delete operations from corrupting database state is also - important.</p> -<p><strong>Requirements</strong>:</p> -<ul> - <li>Knowledge of C.</li> - <li>Basic understanding of the use of berkeley db.</li> -</ul> - </desc> - </idea> - <idea id="ports-pkgtools"> <title>Package tools improvements</title> @@ -1283,38 +1258,6 @@ </desc> </idea> - <idea class="soc" id="ports-parallel"> - <title>Parallelization in the Ports Collection</title> - - <desc> - <p>Add locking of write access to PKG_DBDIR (/var/db/pkg), to allow - several port builds run in parallel without clobbering the package - data. Should be done both in makefiles and in C tools like - pkg_install and pkg_delete. A simple flock(2) approach over the - whole database comes to mind.</p> - - <p>The next step is the parallelization of dependency building. Have - the port build it's dependencies in parallel, automatically - depending on number of CPUs in the machine, or manually specified - by user (make -j3 install clean). Some kind of split screen should - be devised, so user can easily watch the process and interact with - it (make config screens, for example). Attention must be paid to - prevent deadlocks.</p> - - <p>Allow for situation when two ports want to build and install - common dependency. One of the ports have to wait on the other to - install it before proceeding.</p> - - <p><strong>Requirements</strong>:</p> - - <ul> - <li>Strong knowledge of make and shell code.</li> - <li>Strong knowledge of C code.</li> - <li>Good understanding of the inner design of the Ports Collection.</li> - </ul> - </desc> - </idea> - <idea id="fat-pkgs" class="soc"> <title>Complete (a.k.a. Fat) packages</title> <desc> @@ -1654,6 +1597,32 @@ </desc> </idea> + <idea id="privmodel" class="soc"> + <title>New kernel privilege model</title> + + <desc> + <p><strong>Technical contact</strong>: <a + href="mailto:rwatson@FreeBSD.org">Robert Watson</a></p> + + <p>FreeBSD uses a largely standard UNIX privilege model, granting + special OS rights to processes with an effective uid of 0. + Exceptional behavior lies in securelevel (restricting root based + on a global or per-jail level), Jail (limiting certain rights to + ensure safe containment for a jailed root user), and the ability + for the MAC Framework to augment privilege decisions. However, + as of FreeBSD 7.0, privilege decisions internal to the kernel + have been made with respect to a large set of named privileges + (priv.h). This project idea is to create a new privilege model, + similar perhaps to POSIX.1e or the Solaris privilege model, + allowing masks of privileges to be associated with process + credentials and managed with system calls. Of particular + interest is supporting the assignment of privileges to users or + roles -- such as the right to bind low port numbers, use DTrace, + etc. + </p> + </desc> + </idea> + </category> <category> ==== //depot/projects/docproj_nl/www/en/releases/7.3R/errata.html#3 (text+ko) ==== @@ -19,7 +19,7 @@ <p class="COPYRIGHT">Copyright © 2010 The FreeBSD Documentation Project</p> <p class="PUBDATE">$FreeBSD: stable/7/release/doc/en_US.ISO8859-1/errata/article.sgml -205521 2010-03-23 18:36:45Z hrs $<br /> +206131 2010-04-03 10:07:10Z hrs $<br /> </p> <div class="LEGALNOTICE"><a id="TRADEMARKS" name="TRADEMARKS"></a> @@ -102,10 +102,48 @@ <h2 class="SECT1"><a id="LATE-NEWS" name="LATE-NEWS">4 Late-Breaking News and Corrections</a></h2> -<p>[20100323] The FreeBSD 7.3-RELEASE Release Notes incorrectly mentioned that the -hwpmc(4) driver has been added though this driver has already been added in 7.0-RELEASE. -The changes in 7.3-RELEASE are that pmcannotate(8) utility and support for Intel Core 2 >>> TRUNCATED FOR MAIL (1000 lines) <<<
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201004052110.o35LAc6q009372>