Date: Sat, 30 Mar 2002 21:56:06 -0600 From: "Craig Boston" <craig@meoqu.gank.org> To: <stable@freebsd.org> Subject: More 4.5-stable ATA problems Message-ID: <041901c1d868$059f5110$5f45a8c0@auir.gank.org>
next in thread | raw e-mail | index | archive | help
Bah, thought I was just lucky after seeing all the trouble reports on the
list about the new ATA drivers. Just cvsupped my fileserver about an hour
ago and am now getting these messages intermittently (each immediately
following a 2-3 second total freeze of the box, including the console).
ad6: READ command timeout tag=0 serv=0 - resetting
ata3: resetting devices .. done
ad6: READ command timeout tag=0 serv=0 - resetting
ata3: resetting devices .. ata3-slave: ATA identify retries exceeded
done
ad4: READ command timeout tag=0 serv=0 - resetting
ata2: resetting devices .. done
...with this hardware:
atapci2: <CMD 649 ATA100 controller> port
0xc400-0xc40f,0xc000-0xc003,0xbc00-0xbc07,0xb800-0xb803,0xb400-0xb407 irq 10
at device 16.0 on pci0
It's worked perfectly until today. Sorry, Soren :-( At least it hasn't
panicked so far.
Anyway, just thought I'd report this so that everybody's aware there may be
a problem with these cards and stable. I've attached the boot messages with
bootverbose, as well as a few of the error messages with it on also in case
it helps track anything down. This box is somewhat important to me, so I'm
in the process of downgrading to RELENG_4_5. This should be a fun
buildworld :D
Craig
bootverbose dmesg:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #0: Sat Mar 30 20:20:15 CST 2002
xxxxx@yyyyy:/usr/obj/usr/src/sys/TASSADAR
Calibrating clock(s) ... TSC clock: 350798695 Hz, i8254 clock: 1193193 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: AMD-K6(tm) 3D processor (350.80-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
Data TLB: 128 entries, 2-way associative
Instruction TLB: 64 entries, 1-way associative
L1 data cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
L1 instruction cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way
associative
Write Allocate Enable Limit: 128M bytes
Write Allocate 15-16M bytes: Enable
real memory = 134217728 (131072K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x00352000 - 0x07ff7fff, 130703360 bytes (31910 pages)
avail memory = 127422464 (124436K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fb010
bios32: Entry = 0xfb490 (c00fb490) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xb4c0
pnpbios: Found PnP BIOS data at 0xc00fc060
pnpbios: Entry = f0000:c088 Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc032b000.
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
Creating DISK md0
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=154110b9)
Using $PIR table, 7 entries at 0xc00fdda0
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 1729129089 bytes/sec
bzero() bandwidth = 1452159140 bytes/sec
pcib0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> on motherboard
found-> vendor=0x10b9, dev=0x1541, revid=0x04
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base e0000000, size 25
found-> vendor=0x10b9, dev=0x5243, revid=0x04
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x10b9, dev=0x5237, revid=0x03
class=0c-03-10, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base e6910000, size 12
found-> vendor=0x10b9, dev=0x1533, revid=0xc3
class=06-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1095, dev=0x0649, revid=0x02
class=01-04-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=12
map[10]: type 1, range 32, base 0000a000, size 3
map[14]: type 1, range 32, base 0000a400, size 2
map[18]: type 1, range 32, base 0000a800, size 3
map[1c]: type 1, range 32, base 0000ac00, size 2
map[20]: type 1, range 32, base 0000b000, size 4
found-> vendor=0x10b9, dev=0x5229, revid=0xc1
class=01-01-fa, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=255
map[10]: type 1, range 32, base 000001f0, size 4
map[14]: type 1, range 32, base 000003f4, size 2
map[18]: type 1, range 32, base 00000170, size 4
map[1c]: type 1, range 32, base 00000374, size 2
map[20]: type 1, range 32, base 0000f000, size 4
found-> vendor=0x1095, dev=0x0649, revid=0x02
class=01-04-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 0000b400, size 3
map[14]: type 1, range 32, base 0000b800, size 2
map[18]: type 1, range 32, base 0000bc00, size 3
map[1c]: type 1, range 32, base 0000c000, size 2
map[20]: type 1, range 32, base 0000c400, size 4
found-> vendor=0x1039, dev=0x6326, revid=0x0b
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base e6000000, size 23
map[14]: type 1, range 32, base e6900000, size 16
map[18]: type 1, range 32, base 0000c800, size 7
found-> vendor=0x8086, dev=0x1229, revid=0x08
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=15
map[10]: type 1, range 32, base e6911000, size 12
map[14]: type 1, range 32, base 0000cc00, size 6
map[18]: type 1, range 32, base e6800000, size 20
pci0: <PCI bus> on pcib0
pcib1: <AcerLabs M5243 PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xe6910000-0xe6910fff
irq 11 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <CMD 649 ATA100 controller> port
0xb000-0xb00f,0xac00-0xac03,0xa800-0xa807,0xa400-0xa403,0xa000-0xa007 irq 12
at device 14.0 on pci0
ata-: ata2 exists, using next available unit number
ata2: iobase=0xa000 altiobase=0xa402 bmaddr=0xb000
ata2: mask=03 ostat0=50 ostat2=00
ata2-master: ATAPI 00 00
ata2-slave: ATAPI 00 00
ata2: mask=03 stat0=50 stat1=00
ata2-master: ATA 01 a5
ata2: devices=01
ata2: at 0xa000 on atapci0
ata3: iobase=0xa800 altiobase=0xac02 bmaddr=0xb008
ata3: mask=03 ostat0=50 ostat2=00
ata3-master: ATAPI 00 00
ata3-slave: ATAPI 00 00
ata3: mask=03 stat0=50 stat1=00
ata3-master: ATA 01 a5
ata3: devices=01
ata3: at 0xa800 on atapci0
using shared irq12.
atapci1: <AcerLabs Aladdin ATA33 controller> port
0xf000-0xf00f,0x374-0x377,0x170-0x17f,0x3f4-0x3f7,0x1f0-0x1ff at device 15.0
on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 14 eb
ata0-slave: ATAPI 7f 7f
ata0: mask=03 stat0=00 stat1=00
ata0: devices=04
ata0: at 0x1f0 irq 14 on atapci1
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008
ata1: at 0x170 irq 15 on atapci1
atapci2: <CMD 649 ATA100 controller> port
0xc400-0xc40f,0xc000-0xc003,0xbc00-0xbc07,0xb800-0xb803,0xb400-0xb407 irq 10
at device 16.0 on pci0
ata-: ata2 exists, using next available unit number
ata-: ata2 exists, using next available unit number
ata4: iobase=0xb400 altiobase=0xb802 bmaddr=0xc400
ata4: mask=03 ostat0=50 ostat2=00
ata4-master: ATAPI 00 00
ata4-slave: ATAPI 00 00
ata4: mask=03 stat0=50 stat1=00
ata4-master: ATA 01 a5
ata4: devices=01
ata4: at 0xb400 on atapci2
ata5: iobase=0xbc00 altiobase=0xc002 bmaddr=0xc408
ata5: mask=03 ostat0=7f ostat2=7f
ata5-master: ATAPI 7f 7f
ata5-slave: ATAPI 7f 7f
ata5: mask=03 stat0=7f stat1=7f
ata5-master: ATA 7f 7f
ata5-slave: ATA 7f 7f
ata5: devices=00
ata5: at 0xbc00 on atapci2
using shared irq10.
pci0: <SiS 6326 SVGA controller> (vendor=0x1039, dev=0x6326) at 18.0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xcc00-0xcc3f mem
0xe6800000-0xe68fffff,0xe6911000-0xe6911fff irq 15 at device 20.0 on pci0
fxp0: using memory space register mapping
using shared irq15.
fxp0: Ethernet address 00:90:27:xx:yy:zz :-)
fxp0: PCI IDs: 8086 1229 8086 000c 0008
fxp0: Dynamic Standby mode is disabled
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
USR3070: start dependant
USR3070: adding fixed io range 0x2f8-0x2ff, size=0x8, align=0x1
USR3070: adding irq mask 00x8
USR3070: start dependant
USR3070: adding fixed io range 0x3f8-0x3ff, size=0x8, align=0x1
USR3070: adding irq mask 0x10
USR3070: start dependant
USR3070: adding fixed io range 0x3e8-0x3ef, size=0x8, align=0x1
USR3070: adding irq mask 0xb8
USR3070: start dependant
USR3070: adding fixed io range 0x2e8-0x2ef, size=0x8, align=0x1
USR3070: adding irq mask 0xb8
USR3070: end dependant
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
ata6 failed to probe at port 0x1f0 irq 14 on isa0
ata7 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 53 9f
bf 1f 00 4f 0d 0e 00 00 07 80 9b 8d 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 53 9f
bf 1f 00 4f 0d 0e 00 00 00 00 9b 8d 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 53 9f
bf 1f 00 4f 0d 0e 00 00 00 00 9b 8d 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/1 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
isa_probe_children: probing PnP devices
sio4: irq maps: 0x1 0x21 0x1 0x1
sio4: <U.S. Robotics 56K Voice INT> at port 0x3e8-0x3ef irq 5 on isa0
sio4: type 16550A
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
2:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
IPsec: Initialized Security Association Processing.
ad4: success setting UDMA5 on CMD chip
Creating DISK ad4
ad4: <WDC WD400BB-00AUA1/18.20D18> ATA-5 disk at ata2-master
ad4: 38166MB (78165360 sectors), 77545 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA100
ad4: piomode=4 dmamode=2 udmamode=5 cblid=1
ad6: success setting UDMA5 on CMD chip
Creating DISK ad6
ad6: <WDC WD400BB-00AUA1/18.20D18> ATA-5 disk at ata3-master
ad6: 38166MB (78165360 sectors), 77545 C, 16 H, 63 S, 512 B
ad6: 16 secs/int, 1 depth queue, UDMA100
ad6: piomode=4 dmamode=2 udmamode=5 cblid=1
ad8: success setting UDMA5 on CMD chip
Creating DISK ad8
ad8: <WDC WD400BB-32AUA1/18.20D18> ATA-5 disk at ata4-master
ad8: 38166MB (78165360 sectors), 77545 C, 16 H, 63 S, 512 B
ad8: 16 secs/int, 1 depth queue, UDMA100
ad8: piomode=4 dmamode=2 udmamode=5 cblid=1
ata0-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata0-master: success setting UDMA2 on Acer chip
acd0: <ATAPI 48X CDROM/VER-3.30> CDROM drive at ata0 as master
acd0: read 171KB/s (32KB/s), 128KB buffer, UDMA33
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Mounting root from ufs:/dev/ad4s1a
ad4s1: type 0xa5, start 63, end = 78156224, size 78156162 : OK
start_init: trying /sbin/init
ad4s1: type 0xa5, start 63, end = 78156224, size 78156162 : OK
ad4s1: type 0xa5, start 63, end = 78156224, size 78156162 : OK
ad4s1: type 0xa5, start 63, end = 78156224, size 78156162 : OK
ad6s1: type 0xa5, start 63, end = 78156224, size 78156162 : OK
ad6s1: type 0xa5, start 63, end = 78156224, size 78156162 : OK
ad6s1: type 0xa5, start 63, end = 78156224, size 78156162 : OK
ad6s1: type 0xa5, start 63, end = 78156224, size 78156162 : OK
ad6s1: type 0xa5, start 63, end = 78156224, size 78156162 : OK
ad8s1: type 0xa5, start 63, end = 78156224, size 78156162 : OK
ad8s1: type 0xa5, start 63, end = 78156224, size 78156162 : OK
ad8s1: type 0xa5, start 63, end = 78156224, size 78156162 : OK
ad8s1: type 0xa5, start 63, end = 78156224, size 78156162 : OK
ad8s1: type 0xa5, start 63, end = 78156224, size 78156162 : OK
md0: invalid primary partition table: no magic
ad4: READ command timeout tag=0 serv=0 - resetting
ata2: resetting devices .. ata2: mask=03 ostat0=50 ostat2=00
ad4: ATAPI 00 00
ata2-slave: ATAPI 00 00
ata2: mask=03 stat0=50 stat1=00
ad4: ATA 01 a5
ata2: devices=01
ad4: success setting UDMA5 on CMD chip
done
ad6: READ command timeout tag=0 serv=0 - resetting
ata3: resetting devices .. ata3: mask=03 ostat0=50 ostat2=00
ad6: ATAPI 00 00
ata3-slave: ATAPI 00 00
ata3: mask=03 stat0=50 stat1=00
ad6: ATA 01 a5
ata3: devices=01
ad6: success setting UDMA5 on CMD chip
done
ad4: WRITE command timeout tag=0 serv=0 - resetting
ata2: resetting devices .. ata2: mask=03 ostat0=d0 ostat2=d0
ad4: ATAPI 00 00
ata2-slave: ATAPI 00 00
ata2: mask=03 stat0=50 stat1=00
ad4: ATA 01 a5
ata2-slave: ATA 01 a5
ata2: devices=03
ata2-slave: ATA identify retries exceeded
ad4: success setting UDMA5 on CMD chip
ad4: READ command timeout tag=0 serv=0 - resetting
ata2: resetting devices .. ata2: mask=03 ostat0=50 ostat2=00
ad4: ATAPI 00 00
ata2-slave: ATAPI 00 00
ata2: mask=03 stat0=50 stat1=00
ad4: ATA 01 a5
ata2: devices=01
ad4: success setting UDMA5 on CMD chip
done
ad4: WRITE command timeout tag=0 serv=0 - resetting
ata2: resetting devices .. ata2: mask=03 ostat0=50 ostat2=00
ad4: ATAPI 00 00
ata2-slave: ATAPI 00 00
ata2: mask=03 stat0=50 stat1=00
ad4: ATA 01 a5
ata2: devices=01
ad4: success setting UDMA5 on CMD chip
done
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?041901c1d868$059f5110$5f45a8c0>