Date: Mon, 25 Sep 2006 19:12:30 +0100 From: Christopher J Phillips <SysAdmin@Rainbow-IT.net> To: FreeBSD ACPI <FreeBSD-ACPI@FreeBSD.org> Subject: Re: ACPI causing problems on acer Aspire 7100 series laptop Message-ID: <45181C0E.2040501@Rainbow-IT.net> In-Reply-To: <44F8D836.2040608@Rainbow-IT.net> References: <44F8D836.2040608@Rainbow-IT.net>
next in thread | previous in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello again, I've not been able to come up with anything that might make things better for my system, though I did wonder... Does anyone think I might be able to use some more specific entries in /boot/loader.conf that would enable me to have at least some ACPI functionality? Or, is there anything that you can suggest I can do to help myself out toward a more stable/functional ACPI system? Kind Regards, - -- ChrisP Christopher J Phillips wrote: > Hi FreeBSD-ACPI, > > I hope I'm OK to mail you with this. I'm reading > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/acpi-debug.html > and it looks like section 11.16.4 applies to me, but I'd like some > confirmation/direction from those in the know. > > I'll be trying to find out more about the problem and maybe fix it, but > here's what I've got so far (as per section 11.16.1): - > > I'm unsure of my BIOS level... > > > o Description of the buggy behavior > > This is a brand new laptop, backed up the Windoze OS and is now running > FreeBSD 6.1 STABLE > > # uname -a > FreeBSD Hathor.HQ.Rainbow-IT.net 6.1-STABLE FreeBSD 6.1-STABLE #3: Sun > Aug 27 13:59:44 BST 2006 > chrisp@hathor.hq.rainbow-it.net:/usr/src/sys/i386/compile/HATHOR i386 > > The ACPI problem was apparent immediately after install. > > The boot screen is flooded with messages like this: - > > Sep 1 11:52:14 Hathor kernel: ACPI-0501: *** Error: Handler for > [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE > Sep 1 11:52:14 Hathor kernel: ACPI-1304: *** Error: Method execution > failed [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731580), > AE_NO_HARDWARE_RESPONSE > Sep 1 11:52:14 Hathor kernel: ACPI-0239: *** Error: Method execution > failed [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731580), > AE_NO_HARDWARE_RESPONSE > Sep 1 11:52:14 Hathor kernel: ACPI-0501: *** Error: Handler for > [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE > Sep 1 11:52:14 Hathor kernel: ACPI-1304: *** Error: Method execution > failed [\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc5731680), > AE_NO_HARDWARE_RESPONSE > Sep 1 11:52:14 Hathor kernel: ACPI-1304: *** Error: Method execution > failed [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc5731540), > AE_NO_HARDWARE_RESPONSE > Sep 1 11:52:14 Hathor kernel: ACPI-0501: *** Error: Handler for > [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE > Sep 1 11:52:14 Hathor kernel: ACPI-1304: *** Error: Method execution > failed [\_SB_.PCI0.LPCB.EC0_.GBIF] (Node 0xc57316a0), > AE_NO_HARDWARE_RESPONSE > Sep 1 11:52:14 Hathor kernel: ACPI-1304: *** Error: Method execution > failed [\_SB_.PCI0.LPCB.EC0_.BAT0._BIF] (Node 0xc5731560), > AE_NO_HARDWARE_RESPONSE > Sep 1 11:52:53 Hathor kernel: ACPI-0501: *** Error: Handler for > [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE > Sep 1 11:52:53 Hathor kernel: ACPI-1304: *** Error: Method execution > failed [\_TZ_.TZS0._TMP] (Node 0xc572d100), AE_NO_HARDWARE_RESPONSE > > and these messages continue after boot and I am not able to log in and I > do not get a prompt and can not switch to another vtty, so have to cycle > the power and boot up with ACPI disabled. > > I have temporarily added the following line to /boot/loader.conf: - > > hint.acpi.0.disabled="1" > > Instead of that I would prefer to spend some time learning how to > diagnose my problems and if at all possible, help the FreeBSD community > fix them... > > > o The dmesg(8) output after boot -v > > I have had to grab this stuff from /var/log/messages as there appears to > be too many messages and I think they're pushing the first ones out of > the dmesg buffer, before they can be recorded in /var/run/dmesg.boot. > Even when grabbing the stuff directly from the messages log itself, I > don't see the California bit anywhere, when I've booted up wth ACPI enabled. > > Sep 2 00:41:27 Hathor syslogd: kernel boot file is /boot/kernel/kernel > intpin 20 (PCI IRQ 20) to vector 54 > rl0: [MPSAFE] > cbb0: mem 0xb8003000-0xb8003fff irq 22 at device 9.0 on pci6 > cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb8003000 > cardbus0: on cbb0 > pccard0: <16-bit PCCard bus> on cbb0 > ioapic0: routing intpin 22 (PCI IRQ 22) to vector 55 > cbb0: [MPSAFE] > cbb0: PCI Configuration space: > 0x00: 0x14101524 0x02100107 0x06070001 0x00025108 > 0x10: 0xb8003000 0x020000a0 0x24070706 0xfffff000 > 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc > 0x30: 0x00000000 0xfffffffc 0x00000000 0x07440116 > 0x40: 0x01001025 0x00000001 0x00000000 0x00000000 > 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x80: 0x08405021 0x00000000 0x00000000 0x00001022 > 0x90: 0x604402c0 0x00000000 0x00000000 0x00000000 > 0xa0: 0xfe010001 0x00c00000 0x00008000 0x0000001f > 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xc0: 0x00001000 0x00800080 0x06080600 0x00000000 > 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 > isab0: at device 31.0 on pci0 > isa0: on isab0 > atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at > device 31.2 on pci0 > atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1810 > atapci0: failed to enable memory mapping! > ata0: on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 > atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 > ata0: reset tp1 mask=03 ostat0=50 ostat1=10 > ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90 > ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 > ata0: stat1=0x10 err=0x01 lsb=0x14 msb=0xeb > ata0: reset tp2 stat0=50 stat1=10 devices=0x9 > ioapic0: routing intpin 14 (ISA IRQ 14) to vector 56 > ata0: [MPSAFE] > ata1: on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 > atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 > ata1: reset tp1 mask=03 ostat0=7f ostat1=7f > ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff > Sep 2 00:41:27 Hathor last message repeated 21 times > ata1: stat1=0x7f err=0xff lsb=0xff msb=0xff > ata1: reset tp2 stat0=ff stat1=ff devices=0x0 > ioapic0: routing intpin 15 (ISA IRQ 15) to vector 57 > ata1: [MPSAFE] > pci0: at device 31.3 (no driver attached) > acpi_tz0: on acpi0 > acpi_tz1: on acpi0 > atkbdc0: port 0x60,0x64 irq 1 on acpi0 > atkbd0: irq 1 on atkbdc0 > atkbd: the current kbd controller command byte 0047 > atkbd: keyboard ID 0x41ab (2) > kbd0 at atkbd0 > kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 > ioapic0: routing intpin 1 (ISA IRQ 1) to vector 58 > atkbd0: [GIANT-LOCKED] > psm0: unable to allocate IRQ > psmcpnp0: irq 12 on acpi0 > psm0: current command byte:0047 > psm0: irq 12 on atkbdc0 > ioapic0: routing intpin 12 (ISA IRQ 12) to vector 59 > psm0: [GIANT-LOCKED] > psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons > psm0: config:00000000, flags:00000008, packet size:3 > psm0: syncmask:c0, syncbits:00 > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > battery0: on acpi0 > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_acad0: on acpi0 > ata: ata0 already exists; skipping it > ata: ata1 already exists; skipping it > atkbdc: atkbdc0 already exists; skipping it > sc: sc0 already exists; skipping it > vga: vga0 already exists; skipping it > vt: vt0 already exists; skipping it > pnp_identify: Trying Read_Port at 203 > pnp_identify: Trying Read_Port at 243 > pnp_identify: Trying Read_Port at 283 > pnp_identify: Trying Read_Port at 2c3 > pnp_identify: Trying Read_Port at 303 > pnp_identify: Trying Read_Port at 343 > pnp_identify: Trying Read_Port at 383 > pnp_identify: Trying Read_Port at 3c3 > PNP Identify complete > isa_probe_children: disabling PnP devices > isa_probe_children: probing non-PnP devices > pmtimer0 on isa0 > orm0: at iomem 0xcf800-0xd07ff,0xdc000-0xdffff,0xe0000-0xe17ff on isa0 > vt0: at port 0x3b0-0x3df iomem 0-0x7fff on isa0 > vt0: generic VGA, 80 columns, color, 8 screens, unknown keyboard > sc0: at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) > vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > adv0: not probed (disabled) > aha0: not probed (disabled) > aic0: not probed (disabled) > bt0: not probed (disabled) > cs0: not probed (disabled) > ed0: not probed (disabled) > fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 > fe0: not probed (disabled) > ie0: not probed (disabled) > lnc0: not probed (disabled) > ppc0 failed to probe at irq 7 on isa0 > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: irq maps: 0x4e01 0x4e01 0x4e01 0x4e01 > sio0: probe failed test(s): 0 1 2 4 6 7 9 > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 8250 or not responding > ioapic0: routing intpin 4 (ISA IRQ 4) to vector 60 > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > sio1: irq maps: 0x4e01 0x4e01 0x4e01 0x4e01 > sio1: probe failed test(s): 0 1 2 4 6 7 9 > sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 > sio2: not probed (disabled) > sio3: not probed (disabled) > sn0: not probed (disabled) > isa_probe_children: probing PnP devices > ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/21.00, addr 2, iclass 3/1 > ums0: 8 buttons and Z dir. > uaudio0: Logitech Logitech USB Headset, rev 1.10/10.13, addr 3 > uaudio0: ignored input endpoint of type adaptive > uaudio0: audio rev 1.00 > uaudio0: 6 mixer controls > pcm0: on uaudio0 > pcm0: using a default buffer size of 16384 > uaudio0: uaudio_query_formats: found a native playback channel (stereo) > fixed frequency (5 listed formats) 16bit 2bytes/subframe X 2 channels = > 4 bytes per sample > uaudio0: uaudio_query_formats: found a native playback channel (mono) > fixed frequency (5 listed formats) 16bit 2bytes/subframe X 1 channels = > 2 bytes per sample > uaudio0: play buf 0xc58fc000 > Device configuration finished. > Reducing kern.maxvnodes 101579 -> 100000 > procfs registered > lapic: Divisor 2, Frequency 49879903 hz > Timecounter "TSC" frequency 1496402665 Hz quality 800 > Timecounters tick every 1.000 msec > lo0: bpf attached > battery0: battery initialization start > acpi_acad0: acline initialization start > ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire > ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire > ad0: 76319MB at ata0-master UDMA100 > ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue > GEOM: new disk ad0 > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed [\_TZ_.TZS0._TMP] (Node > 0xc572d0e0), AE_NO_HARDWARE_RESPONSE > acpi_tz0: error fetching current temperature -- AE_NO_HARDWARE_RESPONSE > acpi_acad0: On Line > acpi_acad0: acline initialization done, tried 1 times > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ad0: Intel check1 failed > ad0: Adaptec check1 failed > ad0: LSI (v3) check1 failed > ad0: LSI (v2) check1 failed > ad0: FreeBSD check1 failed > acd0: DVDR drive at ata0 as slave > acd0: read 8115KB/s (8115KB/s) write 172KB/s, 2048KB buffer, UDMA33 > acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet > acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof > acd0: Audio: play, 256 volume levels > acd0: Mechanism: ejectable tray, unlocked > acd0: Medium: 120mm data disc > ATA PseudoRAID loaded > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc5731660), AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc5731520), AE_NO_HARDWARE_RESPONSE > battery0: error fetching current battery status -- AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.GBIF] (Node 0xc5731680), AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._BIF] (Node 0xc5731540), AE_NO_HARDWARE_RESPONSE > battery0: error fetching current battery info -- AE_NO_HARDWARE_RESPONSE > Trying to mount root from ufs:/dev/ad0s1a > start_init: trying /sbin/init > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc5731660), AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc5731520), AE_NO_HARDWARE_RESPONSE > battery0: error fetching current battery status -- AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc5731660), AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc5731520), AE_NO_HARDWARE_RESPONSE > battery0: error fetching current battery status -- AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc5731660), AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc5731520), AE_NO_HARDWARE_RESPONSE > battery0: error fetching current battery status -- AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc5731660), AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc5731520), AE_NO_HARDWARE_RESPONSE > battery0: error fetching current battery status -- AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc5731520), AE_NO_HARDWARE_RESPONSE > battery0: error fetching current battery status -- AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc5731660), AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc5731520), AE_NO_HARDWARE_RESPONSE > battery0: error fetching current battery status -- AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node 0xc57314a0), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed [\_TZ_.TZS0._TMP] (Node > 0xc572d0e0), AE_NO_HARDWARE_RESPONSE > acpi_tz0: error fetching current temperature -- AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.GBIF] (Node 0xc5731680), AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._BIF] (Node 0xc5731540), AE_NO_HARDWARE_RESPONSE > battery0: error fetching current battery info -- AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed [\_TZ_.TZS0._TMP] (Node > 0xc572d0e0), AE_NO_HARDWARE_RESPONSE > acpi_tz0: error fetching current temperature -- AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.GBIF] (Node 0xc5731680), AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._BIF] (Node 0xc5731540), AE_NO_HARDWARE_RESPONSE > battery0: error fetching current battery info -- AE_NO_HARDWARE_RESPONSE > Linux ELF exec handler installed > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > ACPI-0239: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE > acpi_ec0: EcRead: Failed waiting for EC to send data. > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc5731660), AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed > [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc5731520), AE_NO_HARDWARE_RESPONSE > battery0: error fetching current battery status -- AE_NO_HARDWARE_RESPONSE > Sep 2 00:41:31 Hathor ntpd[575]: ntpd 4.2.0-a Thu Aug 17 15:27:48 BST > 2006 (1) > splash: image decoder found: warp_saver > > > o The dmesg(8) output from boot -v with ACPI disabled > > Copyright (c) 1992-2006 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 6.1-STABLE #3: Sun Aug 27 13:59:44 BST 2006 > chrisp@hathor.hq.rainbow-it.net:/usr/src/sys/i386/compile/HATHOR > Preloaded elf kernel "/boot/kernel/kernel" at 0xc0910000. > Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc0910220. > Preloaded splash_image_data "/boot/modules/oemlogo.bmp" at 0xc09102d0. > Preloaded elf module "/boot/kernel/snd_uaudio.ko" at 0xc0910328. > Preloaded elf module "/boot/kernel/sound.ko" at 0xc09103d8. > Preloaded elf module "/boot/modules/bcmwl5_sys.ko" at 0xc0910484. > Preloaded elf module "/boot/kernel/ndis.ko" at 0xc0910534. > Preloaded elf module "/boot/kernel/if_ndis.ko" at 0xc09105e0. > APIC: Could not find any APICs. > Calibrating clock(s) ... i8254 clock: 1193214 Hz > CLK_USE_I8254_CALIBRATION not specified - using default frequency > Timecounter "i8254" frequency 1193182 Hz quality 0 > Calibrating TSC clock ... TSC clock: 1496404354 Hz > CPU: Intel(R) Celeron(R) M processor 1.50GHz (1496.40-MHz > 686-class CPU) > Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8 > Features=0xafe9fbff > AMD Features=0x100000 > real memory = 1600651264 (1526 MB) > Physical memory chunk(s): > 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) > 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) > 0x0000000000c25000 - 0x000000005db65fff, 1559498752 bytes (380737 pages) > avail memory = 1559384064 (1487 MB) > bios32: Found BIOS32 Service Directory header at 0xc00f7990 > bios32: Entry = 0xfd4b0 (c00fd4b0) Rev = 0 Len = 1 > pcibios: PCI BIOS entry at 0xfd4b0+0x25e > pnpbios: Found PnP BIOS data at 0xc00f7a10 > pnpbios: Entry = f0000:c07f Rev = 1.0 > Other BIOS signatures found: > wlan: <802.11 Link Layer> > ath_rate: version 1.2 > mem: > Pentium Pro MTRR support enabled > nfslock: pseudo-device > null: > io: > random: > VESA: information block > 56 45 53 41 00 03 00 01 00 01 01 00 00 00 40 00 > 00 01 7b 00 00 01 3d 01 00 01 4f 01 00 01 7d 01 > 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > VESA: 15 mode(s) found > VESA: v3.0, 7872k memory, flags:0x1, mode table:0xc07a5940 (1000040) > VESA: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS > VESA: Intel Corporation Intel(r)915GM/910ML/915MS Graphics Controller > Hardware Version 0.0 > kbd: new array size 4 > kbd1 at kbdmux0 > splash: image@0xc084a2e4, size:61614 > splash_bmp: beyond screen capacity (180x114, 16777216 colors) > splash_bmp: beyond screen capacity (180x114, 16777216 colors) > splash_bmp: beyond screen capacity (180x114, 16777216 colors) > splash_bmp: beyond screen capacity (180x114, 16777216 colors) > splash_bmp: beyond screen capacity (180x114, 16777216 colors) > splash_bmp: No appropriate video mode found > bmp_start(): splash_mode:-1 > module_register_init: MOD_LOAD (splash_bmp, 0xc08479e4, 0) error 19 > ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > npx0: INT 16 interface > cpu0 on motherboard > pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fa20 > pci_open(1a): mode1res=0x80000000 (0x80000000) > pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25908086) > pcibios: BIOS version 2.10 > pcib0: pcibus 0 on motherboard > pci0: on pcib0 > pci0: physical bus=0 > found-> vendor=0x8086, dev=0x2590, revid=0x03 > bus=0, slot=0, func=0 > class=06-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x8086, dev=0x2592, revid=0x03 > bus=0, slot=2, func=0 > class=03-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D3 current D0 > map[10]: type 1, range 32, base b0080000, size 19, enabled > map[14]: type 4, range 32, base 00001800, size 3, enabled > map[18]: type 3, range 32, base c0000000, size 28, enabled > map[1c]: type 1, range 32, base b0040000, size 18, enabled > found-> vendor=0x8086, dev=0x2792, revid=0x03 > bus=0, slot=2, func=1 > class=03-80-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0090, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > powerspec 2 supports D0 D3 current D0 > map[10]: type 1, range 32, base 00000000, size 19, memory disabled > found-> vendor=0x8086, dev=0x2668, revid=0x03 > bus=0, slot=27, func=0 > class=04-03-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type 1, range 64, base b0000000, size 14, enabled > found-> vendor=0x8086, dev=0x2660, revid=0x03 > bus=0, slot=28, func=0 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) > lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > found-> vendor=0x8086, dev=0x2658, revid=0x03 > bus=0, slot=29, func=0 > class=0c-03-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > map[20]: type 4, range 32, base 00001820, size 5, enabled > found-> vendor=0x8086, dev=0x2659, revid=0x03 > bus=0, slot=29, func=1 > class=0c-03-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=b, irq=11 > map[20]: type 4, range 32, base 00001840, size 5, enabled > found-> vendor=0x8086, dev=0x265a, revid=0x03 > bus=0, slot=29, func=2 > class=0c-03-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=c, irq=11 > map[20]: type 4, range 32, base 00001860, size 5, enabled > found-> vendor=0x8086, dev=0x265b, revid=0x03 > bus=0, slot=29, func=3 > class=0c-03-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=d, irq=11 > map[20]: type 4, range 32, base 00001880, size 5, enabled > found-> vendor=0x8086, dev=0x265c, revid=0x03 > bus=0, slot=29, func=7 > class=0c-03-20, hdrtype=0x00, mfdev=0 > cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 2 supports D0 D3 current D0 > map[10]: type 1, range 32, base b0004000, size 10, enabled > found-> vendor=0x8086, dev=0x2448, revid=0xd3 > bus=0, slot=30, func=0 > class=06-04-01, hdrtype=0x01, mfdev=0 > cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) > found-> vendor=0x8086, dev=0x2641, revid=0x03 > bus=0, slot=31, func=0 > class=06-01-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x8086, dev=0x2653, revid=0x03 > bus=0, slot=31, func=2 > class=01-01-80, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=b, irq=255 > powerspec 2 supports D0 D3 current D0 > map[20]: type 4, range 32, base 00001810, size 4, enabled > found-> vendor=0x8086, dev=0x266a, revid=0x03 > bus=0, slot=31, func=3 > class=0c-05-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0101, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=b, irq=11 > map[20]: type 4, range 32, base 000018c0, size 5, enabled > agp0: port 0x1800-0x1807 mem > 0xb0080000-0xb00fffff,0xc0000000-0xcfffffff,0xb0040000-0xb007ffff irq 10 > at device 2.0 on pci0 > agp0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xb0080000 > agp0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xb0080000 > agp0: Reserved 0x40000 bytes for rid 0x1c type 3 at 0xb0040000 > agp0: detected 7932k stolen memory > agp0: aperture size is 256M > pci0: at device 2.1 (no driver attached) > pci0: at device 27.0 (no driver attached) > pcib1: irq 11 at device 28.0 on pci0 > pcib1: secondary bus 2 > pcib1: subordinate bus 2 > pcib1: I/O decode 0x2000-0x2fff > pcib1: memory decode 0xb4000000-0xb7ffffff > pcib1: prefetched decode 0xd0000000-0xd3ffffff > pci2: on pcib1 > pci2: physical bus=2 > uhci0: port 0x1820-0x183f irq 11 at device 29.0 on pci0 > uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 > uhci0: [GIANT-LOCKED] > usb0: on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: port 0x1840-0x185f irq 11 at device 29.1 on pci0 > uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 > uhci1: [GIANT-LOCKED] > usb1: on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: port 0x1860-0x187f irq 11 at device 29.2 on pci0 > uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860 > uhci2: [GIANT-LOCKED] > usb2: on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > uhci3: port 0x1880-0x189f irq 11 at device 29.3 on pci0 > uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880 > uhci3: [GIANT-LOCKED] > usb3: on uhci3 > usb3: USB revision 1.0 > uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub3: 2 ports with 2 removable, self powered > ehci0: mem 0xb0004000-0xb00043ff irq 11 at device 29.7 on pci0 > ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xb0004000 > ehci0: [GIANT-LOCKED] > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 > usb4: on ehci0 > usb4: USB revision 2.0 > uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub4: 8 ports with 8 removable, self powered > pcib2: at device 30.0 on pci0 > pcib2: secondary bus 6 > pcib2: subordinate bus 7 > pcib2: I/O decode 0x3000-0x3fff > pcib2: memory decode 0xb8000000-0xb80fffff > pcib2: prefetched decode 0xfff00000-0xfffff > pcib2: Subtractively decoded bridge. > pci6: on pcib2 > pci6: physical bus=6 > found-> vendor=0x14e4, dev=0x4318, revid=0x02 > bus=6, slot=5, func=0 > class=02-80-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0102, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > map[10]: type 1, range 32, base b8000000, size 13, enabled > pcib2: (null) requested memory range 0xb8000000-0xb8001fff: good > found-> vendor=0x10ec, dev=0x8139, revid=0x10 > bus=6, slot=7, func=0 > class=02-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type 4, range 32, base 00003000, size 8, enabled > pcib2: (null) requested I/O range 0x3000-0x30ff: in range > map[14]: type 1, range 32, base b8002000, size 8, enabled > pcib2: (null) requested memory range 0xb8002000-0xb80020ff: good > found-> vendor=0x1524, dev=0x1410, revid=0x01 > bus=6, slot=9, func=0 > class=06-07-00, hdrtype=0x02, mfdev=0 > cmdreg=0x0107, statreg=0x0210, cachelnsz=8 (dwords) > lattimer=0x51 (2430 ns), mingnt=0xc4 (49000 ns), maxlat=0x07 (1750 ns) > intpin=a, irq=10 > powerspec 1 supports D0 D1 D2 D3 current D0 > map[10]: type 1, range 32, base b8003000, size 12, enabled > pcib2: (null) requested memory range 0xb8003000-0xb8003fff: good > ndis0: mem 0xb8000000-0xb8001fff irq 10 at device 5.0 on pci6 > ndis0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xb8000000 > ndis0: [MPSAFE] > ndis0: NDIS API version: 5.1 > ndis0: bpf attached > ndis0: Ethernet address: 00:16:ce:2c:6f:11 > ndis0: bpf attached > rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x3000 > pcib2: rl0 requested I/O range 0x3000-0x30ff: in range > rl0: port 0x3000-0x30ff mem 0xb8002000-0xb80020ff irq 10 at device 7.0 > on pci6 > pcib2: rl0 requested I/O range 0x3000-0x30ff: in range > miibus0: on rl0 > rlphy0: on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > rl0: bpf attached > rl0: Ethernet address: 00:0a:e4:f9:c7:85 > rl0: [MPSAFE] > cbb0: mem 0xb8003000-0xb8003fff irq 10 at device 9.0 on pci6 > cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb8003000 > cardbus0: on cbb0 > pccard0: <16-bit PCCard bus> on cbb0 > cbb0: [MPSAFE] > cbb0: PCI Configuration space: > 0x00: 0x14101524 0x02100107 0x06070001 0x00025108 > 0x10: 0xb8003000 0x020000a0 0x24070706 0xfffff000 > 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc > 0x30: 0x00000000 0xfffffffc 0x00000000 0x0744010a > 0x40: 0x01001025 0x00000001 0x00000000 0x00000000 > 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x80: 0x08405021 0x00000000 0x00000000 0x00001022 > 0x90: 0x604402c0 0x00000000 0x00000000 0x00000000 > 0xa0: 0xfe010001 0x00c00000 0x00008000 0x0000001f > 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xc0: 0x00001000 0x00800080 0x06080600 0x00000000 > 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 > isab0: at device 31.0 on pci0 > isa0: on isab0 > atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at > device 31.2 on pci0 > atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1810 > atapci0: failed to enable memory mapping! > ata0: on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 > atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 > ata0: reset tp1 mask=03 ostat0=50 ostat1=10 > ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90 > ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 > ata0: stat1=0x10 err=0x01 lsb=0x14 msb=0xeb > ata0: reset tp2 stat0=50 stat1=10 devices=0x9 > ata0: [MPSAFE] > ata1: on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 > atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 > ata1: reset tp1 mask=03 ostat0=7f ostat1=7f > ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata1: stat1=0x7f err=0xff lsb=0xff msb=0xff > ata1: reset tp2 stat0=ff stat1=ff devices=0x0 > ata1: [MPSAFE] > pci0: at device 31.3 (no driver attached) > ata: ata0 already exists; skipping it > ata: ata1 already exists; skipping it > pnp_identify: Trying Read_Port at 203 > pnp_identify: Trying Read_Port at 243 > pnp_identify: Trying Read_Port at 283 > pnp_identify: Trying Read_Port at 2c3 > pnp_identify: Trying Read_Port at 303 > pnp_identify: Trying Read_Port at 343 > pnp_identify: Trying Read_Port at 383 > pnp_identify: Trying Read_Port at 3c3 > PNP Identify complete > pnpbios: 16 devices, largest 290 bytes > PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 > PNP0c02: adding io range 0x1000-0x105f, size=0x60, align=0x1 > PNP0c02: adding io range 0x1060-0x107f, size=0x20, align=0x1 > PNP0c02: adding io range 0x1180-0x11bf, size=0x40, align=0x1 > PNP0c02: adding fixed memory32 range 0xfec10000-0xfec17fff, size=0x8000 > PNP0c02: adding fixed memory32 range 0xfec18000-0xfec1ffff, size=0x8000 > PNP0c02: adding fixed memory32 range 0xfec20000-0xfec27fff, size=0x8000 > PNP0c02: adding fixed memory32 range 0xfec28000-0xfec2ffff, size=0x8000 > PNP0c02: adding fixed memory32 range 0xfed00000-0xfed033ff, size=0x3400 > PNP0c02: adding fixed memory32 range 0xfed20000-0xfed8ffff, size=0x70000 > PNP0c02: adding fixed memory32 range 0xf0008000-0xf000bfff, size=0x4000 > pnpbios: handle 0 device ID PNP0c02 (020cd041) > PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0x1 > PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1 > PNP0c02: adding io range 0x28-0x29, size=0x2, align=0x1 > PNP0c02: adding io range 0x2c-0x2d, size=0x2, align=0x1 > PNP0c02: adding io range 0x30-0x31, size=0x2, align=0x1 > PNP0c02: adding io range 0x34-0x35, size=0x2, align=0x1 > PNP0c02: adding io range 0x38-0x39, size=0x2, align=0x1 > PNP0c02: adding io range 0x3c-0x3d, size=0x2, align=0x1 > PNP0c02: adding io range 0x50-0x53, size=0x4, align=0x1 > PNP0c02: adding io range 0x62-0x62, size=0x1, align=0x1 > PNP0c02: adding io range 0x66-0x66, size=0x1, align=0x1 > PNP0c02: adding io range 0x72-0x73, size=0x2, align=0x1 > PNP0c02: adding io range 0x74-0x75, size=0x2, align=0x1 > PNP0c02: adding io range 0x76-0x77, size=0x2, align=0x1 > PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1 > PNP0c02: adding io range 0x90-0x91, size=0x2, align=0x1 > PNP0c02: adding io range 0x92-0x92, size=0x1, align=0x1 > PNP0c02: adding io range 0x93-0x9f, size=0xd, align=0x1 > PNP0c02: adding io range 0xa4-0xa5, size=0x2, align=0x1 > PNP0c02: adding io range 0xa8-0xa9, size=0x2, align=0x1 > PNP0c02: adding io range 0xac-0xad, size=0x2, align=0x1 > PNP0c02: adding io range 0xb0-0xb1, size=0x2, align=0x1 > PNP0c02: adding io range 0xb2-0xb3, size=0x2, align=0x1 > PNP0c02: adding io range 0xb4-0xb5, size=0x2, align=0x1 > PNP0c02: adding io range 0xb8-0xb9, size=0x2, align=0x1 > PNP0c02: adding io range 0xbc-0xbd, size=0x2, align=0x1 > PNP0c02: adding io range 0x1200-0x1200, size=0x1, align=0x1 > PNP0c02: adding io range 0x1204-0x1204, size=0x1, align=0x1 > PNP0c02: adding fixed memory32 range 0xe0000000-0xefffffff, size=0x10000000 > PNP0c02: adding fixed memory32 range 0xf0000000-0xf0003fff, size=0x4000 > PNP0c02: adding fixed memory32 range 0xf0004000-0xf0004fff, size=0x1000 > PNP0c02: adding fixed memory32 range 0xf0005000-0xf0005fff, size=0x1000 > pnpbios: handle 1 device ID PNP0c02 (020cd041) > PNP0c01: adding fixed memory32 range 0xe8000-0xfffff, size=0x18000 > PNP0c01: adding fixed memory32 range 0x100000-0x5f6fffff, size=0x5f600000 > pnpbios: handle 2 device ID PNP0c01 (010cd041) > PNP0200: adding io range 0-0xf, size=0x10, align=0x1 > PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1 > PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 > PNP0200: adding dma mask 0x10 > pnpbios: handle 3 device ID PNP0200 (0002d041) > PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 > PNP0100: adding irq mask 0x1 > pnpbios: handle 5 device ID PNP0100 (0001d041) > PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 > PNP0b00: adding irq mask 0x100 > pnpbios: handle 6 device ID PNP0b00 (000bd041) > PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 > PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 > PNP0303: adding irq mask 0x2 > pnpbios: handle 7 device ID PNP0303 (0303d041) > PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 > PNP0c04: adding irq mask 0x2000 > pnpbios: handle 8 device ID PNP0c04 (040cd041) > PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 > pnpbios: handle 9 device ID PNP0800 (0008d041) > PNP0c02: adding memory32 range 0xdc000-0xdffff, size=0x4000, align=0x4000 > pnpbios: handle 10 device ID PNP0c02 (020cd041) > PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1 > pnpbios: handle 11 device ID PNP0a03 (030ad041) > INT0800: adding fixed memory32 range 0xff000000-0xffffffff, size=0x1000000 > pnpbios: handle 12 device ID INT0800 (0008d425) > PNP0c02: adding fixed memory32 range 0xcf200-0xcf7ff, size=0x600 > PNP0c02: adding fixed memory32 range 0xd0800-0xd3fff, size=0x3800 > pnpbios: handle 13 device ID PNP0c02 (020cd041) > PNP0c02: adding memory32 range 0xe0000-0xe17ff, size=0x1800, align=0x1800 > pnpbios: handle 14 device ID PNP0c02 (020cd041) > PNP0f13: adding irq mask 0x1000 > pnpbios: handle 15 device ID PNP0f13 (130fd041) > vt: vt0 already exists; skipping it > sc: sc0 already exists; skipping it > vga: vga0 already exists; skipping it > isa_probe_children: disabling PnP devices > isa_probe_children: probing non-PnP devices > pmtimer0 on isa0 > orm0: at iomem 0xcf800-0xd07ff,0xdc000-0xdffff,0xe0000-0xe17ff on isa0 > adv0: not probed (disabled) > aha0: not probed (disabled) > aic0: not probed (disabled) > atkbdc0: at port 0x60,0x64 on isa0 > atkbd0: irq 1 on atkbdc0 > atkbd: the current kbd controller command byte 0047 > atkbd: keyboard ID 0x41ab (2) > kbd0 at atkbd0 > kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 > atkbd0: [GIANT-LOCKED] > psm0: current command byte:0047 > psm0: irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons > psm0: config:00000000, flags:00000008, packet size:3 > psm0: syncmask:c0, syncbits:00 > bt0: not probed (disabled) > cs0: not probed (disabled) > ed0: not probed (disabled) > fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 > fe0: not probed (disabled) > ie0: not probed (disabled) > lnc0: not probed (disabled) > ppc0 failed to probe at irq 7 on isa0 > sc0: at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: irq maps: 0x801 0x801 0x801 0x801 > sio0: probe failed test(s): 0 1 2 4 6 7 9 > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 8250 or not responding > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > sio1: irq maps: 0x801 0x801 0x801 0x801 > sio1: probe failed test(s): 0 1 2 4 6 7 9 > sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 > sio2: not probed (disabled) > sio3: not probed (disabled) > sn0: not probed (disabled) > vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > vt0: not probed (disabled) > isa_probe_children: probing PnP devices > unknown: can't assign resources (port) > unknown: at port 0x60 on isa0 > unknown: failed to probe at port 0x61 on isa0 > unknown: can't assign resources (memory) > unknown: at iomem 0xdc000-0xdffff on isa0 > unknown: can't assign resources (memory) > unknown: on isa0 > unknown: can't assign resources (memory) > unknown: at iomem 0xe0000-0xe17ff on isa0 > unknown: can't assign resources (irq) > unknown: at irq 12 on isa0 > ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/21.00, addr 2, iclass 3/1 > ums0: 8 buttons and Z dir. > uaudio0: Logitech Logitech USB Headset, rev 1.10/10.13, addr 3 > uaudio0: ignored input endpoint of type adaptive > uaudio0: audio rev 1.00 > uaudio0: 6 mixer controls > pcm0: on uaudio0 > pcm0: using a default buffer size of 16384 > uaudio0: uaudio_query_formats: found a native playback channel (stereo) > fixed frequency (5 listed formats) 16bit 2bytes/subframe X 2 channels = > 4 bytes per sample > uaudio0: uaudio_query_formats: found a native playback channel (mono) > fixed frequency (5 listed formats) 16bit 2bytes/subframe X 1 channels = > 2 bytes per sample > uaudio0: play buf 0xc5857000 > Device configuration finished. > Reducing kern.maxvnodes 101579 -> 100000 > procfs registered > Timecounter "TSC" frequency 1496404354 Hz quality 800 > Timecounters tick every 1.000 msec > lo0: bpf attached > ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire > ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire > ad0: 76319MB at ata0-master UDMA100 > ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue > GEOM: new disk ad0 > ad0: Intel check1 failed > ad0: Adaptec check1 failed > ad0: LSI (v3) check1 failed > ad0: LSI (v2) check1 failed > ad0: FreeBSD check1 failed > acd0: DVDR drive at ata0 as slave > acd0: read 8115KB/s (8115KB/s) write 172KB/s, 2048KB buffer, UDMA33 > acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet > acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof > acd0: Audio: play, 256 volume levels > acd0: Mechanism: ejectable tray, unlocked > acd0: Medium: 120mm data disc > ATA PseudoRAID loaded > Trying to mount root from ufs:/dev/ad0s1a > start_init: trying /sbin/init > Linux ELF exec handler installed > > > o Output from sysctl hw.acpi > > # sysctl hw.acpi > sysctl: unknown oid 'hw.acpi' > > > o URL where my ASL can be found > > http://rainbow-it.net/chrisp-acerAspire7103WSMi.asl > > > o Additionally, I've attempted to re-compile my ASL - output below > > # iasl chrisp-acerAspire7103WSMi.asl > > Intel ACPI Component Architecture > ASL Optimizing Compiler / AML Disassembler version 20041119 [Aug 17 2006] > Copyright (C) 2000 - 2004 Intel Corporation > Supports ACPI Specification Revision 2.0c > > chrisp-acerAspire7103WSMi.asl 504: Method (_WAK, 1, NotSerialized) > Warning 2026 - Reserved method must return a value ^ (_WAK) > > chrisp-acerAspire7103WSMi.asl 929: Name (_HID, "*pnp0c14") > Error 1068 - String must be entirely alphanumeric ^ > (*pnp0c14) > > chrisp-acerAspire7103WSMi.asl 946: Name (_WDG, Buffer (0xDC) > Warning 2033 - Unknown reserved name ^ (_WDG) > > chrisp-acerAspire7103WSMi.asl 977: Method (_WED, 1, > NotSerialized) > Warning 2019 - Not all control paths return a value ^ (_WED) > > chrisp-acerAspire7103WSMi.asl 977: Method (_WED, 1, > NotSerialized) > Warning 2033 - Unknown reserved name ^ (_WED) > > chrisp-acerAspire7103WSMi.asl 1267: Method (WMCA, 3, > NotSerialized) > Warning 2019 - Not all control paths return a value ^ (WMCA) > > chrisp-acerAspire7103WSMi.asl 1369: Method (WMCB, 3, > NotSerialized) > Warning 2019 - Not all control paths return a value ^ (WMCB) > > chrisp-acerAspire7103WSMi.asl 1418: Method (WMCE, 3, > NotSerialized) > Warning 2019 - Not all control paths return a value ^ (WMCE) > > chrisp-acerAspire7103WSMi.asl 3708: Field (RAM, > AnyAcc, Lock, Preserve) > Error 1048 - Host Operation Region requires ByteAcc access ^ > > chrisp-acerAspire7103WSMi.asl 3732: Field (RAM, > AnyAcc, Lock, Preserve) > Error 1048 - Host Operation Region requires ByteAcc access ^ > > chrisp-acerAspire7103WSMi.asl 3759: Field (RAM, > AnyAcc, Lock, Preserve) > Error 1048 - Host Operation Region requires ByteAcc access ^ > > chrisp-acerAspire7103WSMi.asl 3765: Field (RAM, > AnyAcc, Lock, Preserve) > Error 1048 - Host Operation Region requires ByteAcc access ^ > > chrisp-acerAspire7103WSMi.asl 3771: Field (RAM, > AnyAcc, Lock, Preserve) > Error 1048 - Host Operation Region requires ByteAcc access ^ > > ASL Input: chrisp-acerAspire7103WSMi.asl - 6274 lines, 205163 bytes, > 2820 keywords > Compilation complete. 6 Errors, 7 Warnings, 0 Remarks, 622 Optimizations > > > Does this look like I could do something to help myself out? > > Cheers, > -- > > ChrisP > _______________________________________________ > freebsd-acpi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-acpi > To unsubscribe, send any mail to "freebsd-acpi-unsubscribe@freebsd.org" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFGBwO7z/iRu7PdWERApBHAKDGj5L8VdoklMVUSdcWn/zEIy7JyQCdFlHs SgaekiwG5W15A9IE/sZjKmM= =9n8L -----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?45181C0E.2040501>