Date: Fri, 29 Aug 2003 23:52:09 +0200 From: "Putinas" <pilkis@gmx.net> To: "Andre Guibert de Bruet" <andy@siliconlandmark.com> Cc: freebsd-current@freebsd.org Subject: Re: sony vaio pcg-gr390 Message-ID: <004f01c36e77$ccb651d0$0464a8c0@spotripoli.local> References: <021001c36e66$5ee177e0$0464a8c0@spotripoli.local> <20030829162024.Y452@alpha.siliconlandmark.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I rebooted my notebook to freebsd and was thinking how to save log file if
kernel doesn't boot ... and strange thing happened kernel booted up no hang.
( after I rebooted 3 times more - hanging in same place like before ). So I
think I just got lucky to save dmesg without headache ... and here it is (
sorry if posting verbose dmesg on the list is bad idea :/ ) . The last lines
what I saw when kernel lockups is:
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
cbb0: Unsupported card type detected
<here finish>
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #0: Fri Aug 29 06:29:49 EET 2003
root@pilkisnote.spo-tripoli.local:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0752000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0752294.
Calibrating clock(s) ... i8254 clock: 1193189 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1193108906 Hz
CPU: Intel(R) Pentium(R) III Mobile CPU 1200MHz (1193.11-MHz 686-class
CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR,SSE>
real memory = 536346624 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000779000 - 0x000000001f5d3fff, 518369280 bytes (126555 pages)
0x000000001ff00000 - 0x000000001ff77fff, 491520 bytes (120 pages)
avail memory = 512958464 (489 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6d00
bios32: Entry = 0xfd871 (c00fd871) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd870+0x13a
pnpbios: Found PnP BIOS data at 0xc00f6d30
pnpbios: Entry = f0000:a456 Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <SONY C0 > on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=35758086)
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fdf30
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 2 5 A 0x69 3
embedded 2 8 A 0x68 9
embedded 0 29 A 0x60 9
embedded 0 29 B 0x63 9
embedded 0 2 A 0x60 9
embedded 0 1 A 0x60 9
AcpiOsDerivePciId: bus 1 dev 0 func 0
AcpiOsDerivePciId: bus 2 dev 5 func 0
AcpiOsDerivePciId: bus 2 dev 5 func 1
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.1.0
\\_SB_.LNKB irq 0: [ 9] low,level,sharable 0.1.1
\\_SB_.LNKC irq 0: [ 9] low,level,sharable 0.1.2
\\_SB_.LNKD irq 9: [ 9] low,level,sharable 0.1.3
\\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.2.0
\\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.29.0
\\_SB_.LNKD irq 9: [ 9] low,level,sharable 0.29.1
\\_SB_.LNKC irq 0: [ 9] low,level,sharable 0.29.2
\\_SB_.LNKH irq 0: [ 9] low,level,sharable 0.29.3
\\_SB_.LNKB irq 0: [ 9] low,level,sharable 0.31.1
---- before setting priority for links ------------
\\_SB_.LNKB:
interrupts: 9
penalty: 1050
references: 2
priority: 0
\\_SB_.LNKC:
interrupts: 9
penalty: 1050
references: 2
priority: 0
\\_SB_.LNKH:
interrupts: 9
penalty: 1050
references: 1
priority: 0
---- before fixup boot-disabled links -------------
\\_SB_.LNKB:
interrupts: 9
penalty: 1050
references: 2
priority: 2100
\\_SB_.LNKC:
interrupts: 9
penalty: 1050
references: 2
priority: 2100
\\_SB_.LNKH:
interrupts: 9
penalty: 1050
references: 1
priority: 1050
---- after fixup boot-disabled links --------------
\\_SB_.LNKB:
interrupts: 9
penalty: 1050
references: 2
priority: 2100
\\_SB_.LNKC:
interrupts: 9
penalty: 1050
references: 2
priority: 2100
\\_SB_.LNKH:
interrupts: 9
penalty: 1050
references: 1
priority: 1050
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.1.0
\\_SB_.LNKB irq 0: [ 9] low,level,sharable 0.1.1
\\_SB_.LNKC irq 0: [ 9] low,level,sharable 0.1.2
\\_SB_.LNKD irq 9: [ 9] low,level,sharable 0.1.3
\\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.2.0
\\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.29.0
\\_SB_.LNKD irq 9: [ 9] low,level,sharable 0.29.1
\\_SB_.LNKC irq 0: [ 9] low,level,sharable 0.29.2
\\_SB_.LNKH irq 0: [ 9] low,level,sharable 0.29.3
\\_SB_.LNKB irq 0: [ 9] low,level,sharable 0.31.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e0000000, size 28, enabled
found-> vendor=0x8086, dev=0x3575, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3576, revid=0x02
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0020, cachelnsz=0 (dwords)
lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00001800, size 5, enabled
pcib0: matched entry for 0.29.INTA (source \\_SB_.LNKA)
pcib0: slot 29 INTA is routed to irq 9
found-> vendor=0x8086, dev=0x2482, revid=0x01
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
map[20]: type 4, range 32, base 00001820, size 5, enabled
pcib0: matched entry for 0.29.INTB (source \\_SB_.LNKD)
pcib0: slot 29 INTB is routed to irq 9
found-> vendor=0x8086, dev=0x2484, revid=0x01
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=9
map[20]: type 4, range 32, base 00001840, size 5, enabled
found-> vendor=0x8086, dev=0x2487, revid=0x01
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=255
found-> vendor=0x8086, dev=0x2448, revid=0x41
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x248c, revid=0x01
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 000001f0, size 3, enabled
map[14]: type 4, range 32, base 000003f4, size 2, enabled
map[18]: type 4, range 32, base 00000170, size 3, enabled
map[1c]: type 4, range 32, base 00000374, size 2, enabled
map[20]: type 4, range 32, base 00001860, size 4, enabled
map[24]: type 1, range 32, base d0000000, size 10, memory disabled
found-> vendor=0x8086, dev=0x248a, revid=0x01
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 00001880, size 5, enabled
found-> vendor=0x8086, dev=0x2483, revid=0x01
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
map[10]: type 4, range 32, base 00001c00, size 8, port disabled
map[14]: type 4, range 32, base 000018c0, size 6, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB)
pcib0: possible interrupts: 9
pcib0: slot 31 INTB routed to irq 9 via \\_SB_.LNKB
found-> vendor=0x8086, dev=0x2485, revid=0x01
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=9
map[10]: type 4, range 32, base 00002400, size 8, port disabled
map[14]: type 4, range 32, base 00002000, size 7, enabled
found-> vendor=0x8086, dev=0x2486, revid=0x01
bus=0, slot=31, func=6
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
agp0: <Intel 82830 host to AGP bridge> mem 0xe0000000-0xefffffff at device
0.0 on pci0
agp0: allocating GATT for aperture of size 228M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x3000-0x3fff
pcib1: memory decode 0xd0100000-0xd01fffff
pcib1: prefetched decode 0xd8000000-0xdfffffff
---- initial configuration ------------------------
\\_SB_.LNKA irq 9: [ 9] low,level,sharable 1.0.0
---- before setting priority for links ------------
\\_SB_.LNKB:
interrupts: 9
penalty: 1150
references: 2
priority: 2100
\\_SB_.LNKC:
interrupts: 9
penalty: 1150
references: 2
priority: 2100
\\_SB_.LNKH:
interrupts: 9
penalty: 1150
references: 1
priority: 1050
---- before fixup boot-disabled links -------------
\\_SB_.LNKB:
interrupts: 9
penalty: 1150
references: 2
priority: 2300
\\_SB_.LNKC:
interrupts: 9
penalty: 1150
references: 2
priority: 2300
\\_SB_.LNKH:
interrupts: 9
penalty: 1150
references: 1
priority: 1150
---- after fixup boot-disabled links --------------
\\_SB_.LNKB:
interrupts: 9
penalty: 1150
references: 2
priority: 2300
\\_SB_.LNKC:
interrupts: 9
penalty: 1150
references: 2
priority: 2300
\\_SB_.LNKH:
interrupts: 9
penalty: 1150
references: 1
priority: 1150
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq 9: [ 9] low,level,sharable 1.0.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base d8000000, size 27, enabled
map[14]: type 4, range 32, base 00003000, size 8, enabled
map[18]: type 1, range 32, base d0100000, size 16, enabled
pcib1: matched entry for 1.0.INTA (source \\_SB_.LNKA)
pcib1: slot 0 INTA is routed to irq 9
found-> vendor=0x1002, dev=0x4c59, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0283, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f
irq 9 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f
irq 9 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f at
device 29.2 on pci0
pcib0: matched entry for 0.29.INTC (source \\_SB_.LNKC)
pcib0: possible interrupts: 9
pcib0: slot 29 INTC routed to irq 9 via \\_SB_.LNKC
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
umass0: Sony USB Memory Stick Slot, rev 1.10/1.83, addr 2
umass0:0:0:-1: Attached to scbus0
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x4000-0x4fff
pcib2: memory decode 0xd0200000-0xd02fffff
pcib2: prefetched decode 0xfff00000-0xfffff
---- initial configuration ------------------------
\\_SB_.LNKC irq 0: [ 9] low,level,sharable 2.2.0
\\_SB_.LNKF irq 0: [ 9] low,level,sharable 2.5.0
\\_SB_.LNKG irq 0: [ 9] low,level,sharable 2.5.1
\\_SB_.LNKE irq 9: [ 9] low,level,sharable 2.8.0
---- before setting priority for links ------------
\\_SB_.LNKB:
interrupts: 9
penalty: 1580
references: 2
priority: 2300
\\_SB_.LNKC:
interrupts: 9
penalty: 1580
references: 3
priority: 2300
\\_SB_.LNKH:
interrupts: 9
penalty: 1580
references: 1
priority: 1150
\\_SB_.LNKF:
interrupts: 9
penalty: 1580
references: 1
priority: 0
\\_SB_.LNKG:
interrupts: 9
penalty: 1580
references: 1
priority: 0
---- before fixup boot-disabled links -------------
\\_SB_.LNKC:
interrupts: 9
penalty: 1580
references: 3
priority: 4740
\\_SB_.LNKB:
interrupts: 9
penalty: 1580
references: 2
priority: 3160
\\_SB_.LNKH:
interrupts: 9
penalty: 1580
references: 1
priority: 1580
\\_SB_.LNKF:
interrupts: 9
penalty: 1580
references: 1
priority: 1580
\\_SB_.LNKG:
interrupts: 9
penalty: 1580
references: 1
priority: 1580
---- after fixup boot-disabled links --------------
\\_SB_.LNKC:
interrupts: 9
penalty: 1580
references: 3
priority: 4740
\\_SB_.LNKB:
interrupts: 9
penalty: 1580
references: 2
priority: 3160
\\_SB_.LNKH:
interrupts: 9
penalty: 1580
references: 1
priority: 1580
\\_SB_.LNKF:
interrupts: 9
penalty: 1580
references: 1
priority: 1580
\\_SB_.LNKG:
interrupts: 9
penalty: 1580
references: 1
priority: 1580
---- arbitrated configuration ---------------------
\\_SB_.LNKC irq 0: [ 9] low,level,sharable 2.2.0
\\_SB_.LNKF irq 0: [ 9] low,level,sharable 2.5.0
\\_SB_.LNKG irq 0: [ 9] low,level,sharable 2.5.1
\\_SB_.LNKE irq 9: [ 9] low,level,sharable 2.8.0
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 1, range 32, base d0205000, size 11, enabled
map[14]: type 1, range 32, base d0200000, size 14, enabled
found-> vendor=0x104c, dev=0x8021, revid=0x02
bus=2, slot=2, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=255
powerspec 2 supports D0 D2 D3 current D0
pcib2: matched entry for 2.5.INTA (source \\_SB_.LNKF)
pcib2: possible interrupts: 9
pcib2: slot 5 INTA routed to irq 9 via \\_SB_.LNKF
found-> vendor=0x1180, dev=0x0476, revid=0x80
bus=2, slot=5, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x1180, dev=0x0476, revid=0x80
bus=2, slot=5, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base d0204000, size 12, enabled
map[14]: type 4, range 32, base 00004000, size 6, enabled
pcib2: matched entry for 2.8.INTA (source \\_SB_.LNKE)
pcib2: slot 8 INTA is routed to irq 9
found-> vendor=0x8086, dev=0x1031, revid=0x41
bus=2, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
fwohci0: <Texas Instruments TSB43AA22> mem
0xd0200000-0xd0203fff,0xd0205000-0xd02057ff at device 2.0 on pci2
fwohci0: latency timer 64 -> 64.
fwohci0: cache size 8 -> 8.
pcib2: device fwohci0 requested decoded memory range 0xd0205000-0xd02057ff
pcib2: matched entry for 2.2.INTA (source \\_SB_.LNKC)
pcib2: slot 2 INTA is routed to irq 9
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 08:00:46:03:00:d8:58:63
fwohci0: resetting OHCI...done (loop=0)
fwohci0: fwphy_rddata: 0x2 loop=0, retry=0
fwohci0: phy read failed(2).
fwohci0: fwphy_rddata: 0x3 loop=0, retry=1
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: fwphy_rddata: 0x5 loop=0, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: 0x5 loop=0, retry=0
fwohci0: fwphy_rddata: 0x2 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
fwohci0: fwohci_set_intr: 1
firewire0: <IEEE1394(FireWire) bus> on fwohci0
if_fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 0a:00:46:d8:58:63
fwe0: bpf attached
sbp0: <SBP2/SCSI over firewire> on firewire0
sbp_attach (cold=1)
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=0, retry=0
fwohci0: fwphy_rddata: 0x1 loop=0, retry=0
fwohci0: BUS reset
sbp_post_busreset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
firewire0: bus manager 0 (me)
send phy_config root_node=-1 gap_count=5
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=0
cbb0: <RF5C476 PCI-CardBus Bridge> irq 9 at device 5.0 on pci2
pcib2: device cbb0 requested decoded memory range 0xd0200000-0xd02fffff
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: PCI Configuration space:
0x00: 0x04761180 0x02100007 0x06070080 0x00824000
0x10: 0xd0200000 0x020000dc 0x20000000 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x04000109
0x40: 0x80e7104d 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00a20001 0x00000000 0x04630463 0x30000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x000f0000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x80e7104d 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <RF5C476 PCI-CardBus Bridge> at device 5.1 on pci2
pcib2: device cbb1 requested decoded memory range 0xd0200000-0xd02fffff
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib2: matched entry for 2.5.INTB (source \\_SB_.LNKG)
pcib2: possible interrupts: 9
pcib2: slot 5 INTB routed to irq 9 via \\_SB_.LNKG
cbb1: PCI Configuration space:
0x00: 0x04761180 0x02100007 0x06070080 0x00824000
0x10: 0xd0201000 0x020000dc 0x20000000 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x04000209
0x40: 0x80e7104d 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00a20001 0x00000000 0x04630463 0x30000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x000f0000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x80e7104d 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x4000-0x403f mem
0xd0204000-0xd0204fff irq 9 at device 8.0 on pci2
pcib2: device fxp0 requested decoded memory range 0xd0204000-0xd0204fff
fxp0: using memory space register mapping
fxp0: Ethernet address 08:00:46:43:83:a5
fxp0: PCI IDs: 8086 1031 104d 80e7 0041
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port
0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem
0xd0000000-0xd00003ff at device 31.1 on pci0
ata0: pre reset mask=03 ostat0=50 ostat2=00
ata0-slave: ATAPI 00 00
ata0-master: ATAPI 00 00
ata0: after reset mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: pre reset mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 00 00
ata1: after reset mask=03 stat0=00 stat1=01
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms> at device 31.6 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
acpi_ec0: <embedded controller: GPE 0x1c> port 0x66,0x62 on acpi0
sio0: irq maps: 0x209 0x219 0x209 0x209
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_ec0: info: new max delay is 3 us
acpi_ec0: info: new max delay is 4 us
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi_ec0: info: new max delay is 10 us
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xd8000-0xdbfff,0xc0000-0xcffff
on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x209 0x209 0x209 0x209
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this
adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83
97 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f
98 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83
97 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f
98 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1193108906 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
Current DB 0
ch = 0
Current OP KEY INT BR len Addr Depend Stat: Cnt
1f02c000 OUTL ST2 ALL ALL 12 00000000 1f02c080 8411:0009 RUN,ACTIVE, ack
complete(11)
0x000000e0 0x00450000 0xffbaffff 0x00000000
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
acpi_cmbat1: battery initialization start
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
cbb0: Unsupported card type detected
cbb1: Unsupported card type detected
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ad0: setting UDMA100 on Intel ICH3 chip
ad0: <IC25N030ATDA04-0/DA4OA76A> ATA-5 disk at ata0-master
ad0: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ar: FreeBSD check1 failed
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
acd0: setting PIO4 on Intel ICH3 chip
acd0: <HL-DT-ST CD-RW/DVD DRIVE GCC-4080N/0010> CDRW drive at ata1 as master
acd0: read 1722KB/s (4134KB/s) write 1377KB/s (1377KB/s), 2048KB buffer,
PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/5/63 s:63 l:8385867
[1] f:00 typ:7 s(CHS):1023/255/63 e(CHS):1023/11/63 s:8385993 l:8385867
[2] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/1/63 s:16771860 l:8385930
[3] f:00 typ:7 s(CHS):1023/255/63 e(CHS):1023/15/63 s:25157790 l:33447330
GEOM: Configure ad0s1, start 32256 length 4293563904 end 4293596159
GEOM: Configure ad0s2, start 4293628416 length 4293563904 end 8587192319
GEOM: Configure ad0s3, start 8587192320 length 4293596160 end 12880788479
GEOM: Configure ad0s4, start 12880788480 length 17125032960 end 30005821439
GEOM: Configure ad0s3a, start 0 length 134217728 end 134217727
GEOM: Configure ad0s3b, start 134217728 length 268435456 end 402653183
GEOM: Configure ad0s3c, start 0 length 4293596160 end 4293596159
GEOM: Configure ad0s3e, start 402653184 length 268435456 end 671088639
GEOM: Configure ad0s3f, start 671088640 length 268435456 end 939524095
GEOM: Configure ad0s3g, start 939524096 length 3354072064 end 4293596159
bus_explore done
sbp_post_explore (sbp_cold=2)
(probe1:sbp0:0:0:0): error 22
(probe1:sbp0:0:0:0): Unretryable Error
(probe4:sbp0:0:3:0): error 22
(probe4:sbp0:0:3:0): Unretryable Error
(probe5:sbp0:0:4:0): error 22
(probe5:sbp0:0:4:0): Unretryable Error
(probe6:sbp0:0:5:0): error 22
(probe6:sbp0:0:5:0): Unretryable Error
(probe7:sbp0:0:6:0): error 22
(probe7:sbp0:0:6:0): Unretryable Error
(probe2:sbp0:0:1:0): error 22
(probe2:sbp0:0:1:0): Unretryable Error
(probe3:sbp0:0:2:0): error 22
(probe3:sbp0:0:2:0): Unretryable Error
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present
(probe0:umass-sim0:0:0:0): (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0
24 0
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present
Unretryable error
(probe0:umass-sim0:0:0:0): error 6
(probe0:umass-sim0:0:0:0): Unretryable Error
Mounting root from ufs:/dev/ad0s3a
WARNING: / was not properly dismounted
start_init: trying /sbin/init
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
----- Original Message -----
From: Andre Guibert de Bruet
To: Putinas
Cc: freebsd-current@freebsd.org
Sent: Friday, August 29, 2003 22:28 PM
Subject: Re: sony vaio pcg-gr390
On Fri, 29 Aug 2003, Putinas wrote:
> I tried to check might be my problem with choppy sound is fixed on my
notebook ( definitly has problems with interupts and acpi , because sound
becomes more or less acceptable if I make ping -f something outside - sound
card and network uses same interupt ).
> I upgraded to latest src, compile GENERIC, reboot... and whops:
> hanging where initializing pcmcia ( or the something what goes after this
? ) this is if I boot with ACPI enabled.
> If I boot with acpi disabled - panic and debuging screen ...
>
> So just to pay developers attention to this problem .. because I saw
already to mails about notebooks and acpi ...
Could you boot -v with acpi enabled and post the log somewhere?
> Andre Guibert de Bruet | Enterprise Software Consultant >
> Silicon Landmark, LLC. | http://siliconlandmark.com/ >
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?004f01c36e77$ccb651d0$0464a8c0>