Date: Sun, 29 Dec 1996 20:54:02 -0500 From: Ron Bolin <rlb@mindspring.com> To: freebsd-current@freebsd.org Subject: Can't dump to DAT without errors with todays current. Message-ID: <32C720BA.41C67EA6@mindspring.com>
next in thread | raw e-mail | index | archive | help
My last good dump using dump0uBf /dev/nrst1 200000 /usr on a 90 mm DDS
tape worked fine on 12-20-96 current. I updated today and I can no
longer
dump my user file system. I can dump root OK since it is small, but not
/usr
which is 1GB. I tried several tapes, and the drive works fine uner WinNT
4.0.
for backing up over 1GB. My system is a Adaptec 2940UW and a HP 35480
4mm DAT
as st1.
My systems has 128MB RAM, and a 4GB Fujitsu Fast Wide SCSI drive. I have
an
Archive 5525S QIC SCSI tape as st0.
Any ideas what has changed? I saw only minor changes to dump in CVS.
I get these errors when dump fails and says to sees the end on tape:
/sbin/dump 0uBbf 200000000 32 /dev/nrst1 /usr
DUMP: Date of this level 0 dump: Sun Dec 29 20:39:27 1996
DUMP: Date of last level 0 dump: the epoch
DUMP: Dumping /dev/rsd1s1e (/usr) to /dev/nrst1
DUMP: mapping (Pass I) [regular files]
DUMP: mapping (Pass II) [directories]
DUMP: estimated 1112096 tape blocks on 0.01 tape(s).
DUMP: dumping (Pass III) [directories]
DUMP: dumping (Pass IV) [regular files]
DUMP: End of tape detected
DUMP: Closing /dev/nrst1
DUMP: Change Volumes: Mount volume #2
DUMP: Is the new volume mounted and ready to go?: ("yes" or "no")
Also my console output is:
$ sd1(ahc0:1:0): timed out in datain phase, SCSISIGI == 0x44
SEQADDR == 0x137
sd1(ahc0:1:0): abort message in message buffer
sd1(ahc0:1:0): timed out in datain phase, SCSISIGI == 0x54
SEQADDR == 0x138
ahc0: Issued Channel A Bus Reset. 3 SCBs aborted
sd1(ahc0:1:0): UNIT ATTENTION asc:2f,0 Commands cleared by another
initiator
, retries:3
st1(ahc0:5:0): UNIT ATTENTION asc:29,0
st1(ahc0:5:0): Power on, reset, or bus device reset occurred
st1: oops not queued
sd1(ahc0:1:0): timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0
SEQADDR == 0xf
sd1(ahc0:1:0): timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0
SEQADDR == 0xb
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
sd1(ahc0:1:0): timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0
SEQADDR == 0xb
sd1(ahc0:1:0): timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0
SEQADDR == 0xc
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
Thank's
Ron
--
****************************************************************************
Ron Bolin rlb@mindspring.com, http://www.mindspring.com/~rlb/
GSU: gs01rlb@panther.gsu.edu matrlbx@indigo4.cs.gsu.edu Home:
770-992-8877
****************************************************************************
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?32C720BA.41C67EA6>