Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 2 Jul 1999 18:39:18 -0700 (PDT)
From:      Matthew Jacob <mjacob@feral.com>
To:        "Justin T. Gibbs" <gibbs@plutotech.com>, "Kenneth D. Merry" <ken@plutotech.com>
Cc:        scsi@freebsd.org
Subject:   just so you all know how really whacky it can get...
Message-ID:  <Pine.BSF.4.05.9907021829450.356-100000@semuta.feral.com>

next in thread | raw e-mail | index | archive | help

I've added Fabric support and also added/tested for SCCLUN....

While doing a rescan on a SCCLUN enabled (16 bit luns) through a switch... 
this sort of leads me to believe that we need some more flags so that an
HBA can inform CAM that an exhaustive search isn't needed- or at least I
need to try and implement the REPORT LUNS command... at some point it
rebooted (I didn't yet catch why).... really pretty amusing:

isp1: Loop DOWN- freezing SIMQ until Loop comes up
isp1: LIP occurred
isp1: Loop UP-releasing frozen SIMQ
isp1: Firmware State Config Wait -> Ready
isp1: Loop ID 89, AL_PA 0x4a, Port ID 0x814b4a
isp1: type 0x2@portid 0x814dcb 0x210000203704fe7d
isp1: type 0x2@portid 0x814db5 0x5080020000029502
isp1: type 0x2@portid 0x814dcc 0x2100002037078f93
isp1: type 0x2@portid 0x814dcb 0x210000203704fe7d
isp1: type 0x2@portid 0x814dcd 0x2100002037049eab
isp1: type 0x2@portid 0x814dcc 0x2100002037078f93
isp1: type 0x2@portid 0x814dd2 0x5080020000029501
isp1: type 0x2@portid 0x814dcd 0x2100002037049eab
isp1: type 0x2@portid 0x814ddc 0x2100002037074a00
isp1: type 0x2@portid 0x814dd2 0x5080020000029501
isp1: type 0x2@portid 0x814de0 0x2100002037003259
isp1: type 0x2@portid 0x814ddc 0x2100002037074a00
isp1: type 0x2@portid 0x814de1 0x2100002037049a8f
isp1: type 0x2@portid 0x814de0 0x2100002037003259
isp1: type 0x2@portid 0x814de2 0x2100002037049f06
isp1: type 0x2@portid 0x814de1 0x2100002037049a8f
isp1: type 0x2@portid 0x814de4 0x21000020370022e4
isp1: type 0x2@portid 0x814de2 0x2100002037049f06
isp1: type 0x2@portid 0x814e75 0x000000c08c000176
isp1: type 0x2@portid 0x814de4 0x21000020370022e4
isp1: type 0x2@portid 0x814fef 0x2200080020a020e8
isp1: type 0x2@portid 0x814e75 0x000000c08c000176
isp1: type 0x2@portid 0x814b4a 0x210000e08b0012c5
da2 at isp1 bus 0 target 131 lun 0
da2: <SEAGATE ST19171FCSUN9.0G 1378> Fixed Direct Access SCSI-2 device 
da2: 100.000MB/s transfers, Tagged Queueing Enabled
da2: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C)
da3 at isp1 bus 0 target 132 lun 0
da3: <SEAGATE ST19171FCSUN9.0G 1478> Fixed Direct Access SCSI-2 device 
da3: 100.000MB/s transfers, Tagged Queueing Enabled
da3: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C)
da4 at isp1 bus 0 target 133 lun 0
da4: <SEAGATE ST19171FCSUN9.0G 1378> Fixed Direct Access SCSI-2 device 
da4: 100.000MB/s transfers, Tagged Queueing Enabled
da4: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C)
da5 at isp1 bus 0 target 135 lun 0
da5: <SEAGATE ST19171FCSUN9.0G 1378> Fixed Direct Access SCSI-2 device 
da5: 100.000MB/s transfers, Tagged Queueing Enabled
da5: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C)
da6 at isp1 bus 0 target 136 lun 0
da6: <SEAGATE ST19171FCSUN9.0G 1478> Fixed Direct Access SCSI-2 device 
da6: 100.000MB/s transfers, Tagged Queueing Enabled
da6: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C)
da7 at isp1 bus 0 target 137 lun 0
da7: <SEAGATE ST19171FCSUN9.0G 1378> Fixed Direct Access SCSI-2 device 
da7: 100.000MB/s transfers, Tagged Queueing Enabled
da7: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C)
da8 at isp1 bus 0 target 138 lun 0
da8: <SEAGATE ST19171FCSUN9.0G 1378> Fixed Direct Access SCSI-2 device 
da8: 100.000MB/s transfers, Tagged Queueing Enabled
da8: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C)
da9 at isp1 bus 0 target 139 lun 0
da9: <SEAGATE ST19171FCSUN9.0G 1378> Fixed Direct Access SCSI-2 device 
da9: 100.000MB/s transfers, Tagged Queueing Enabled
da9: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C)
(da10:isp1:0:139:671): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da10:isp1:0:139:671): ILLEGAL REQUEST asc:25,0
(da10:isp1:0:139:671): Logical unit not supported field replaceable unit: 1
(da10:isp1:0:139:671): fatal error, failed to attach to device
(da10:isp1:0:139:671): lost device
(da10:isp1:0:139:671): removing device entry
(da11:isp1:0:136:672): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da11:isp1:0:136:672): ILLEGAL REQUEST asc:25,0
(da11:isp1:0:136:672): Logical unit not supported field replaceable unit: 1
(da11:isp1:0:136:672): fatal error, failed to attach to device
(da11:isp1:0:136:672): lost device
(da11:isp1:0:136:672): removing device entry
(da10:isp1:0:132:22981): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da10:isp1:0:132:22981): ILLEGAL REQUEST asc:25,0
(da10:isp1:0:132:22981): Logical unit not supported field replaceable unit: 1
(da10:isp1:0:132:22981): fatal error, failed to attach to device
(da10:isp1:0:132:22981): lost device
(da10:isp1:0:132:22981): removing device entry
(da11:isp1:0:136:22980): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da11:isp1:0:136:22980): ILLEGAL REQUEST asc:25,0
(da11:isp1:0:136:22980): Logical unit not supported field replaceable unit: 1
(da11:isp1:0:136:22980): fatal error, failed to attach to device
(da11:isp1:0:136:22980): lost device
(da11:isp1:0:136:22980): removing device entry
isp1: command timed out for target 137 lun 671
isp1: command timed out for target 138 lun 671
(da10:isp1:0:133:28905): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da10:isp1:0:133:28905): ILLEGAL REQUEST asc:25,0
(da10:isp1:0:133:28905): Logical unit not supported field replaceable unit: 1
(da10:isp1:0:133:28905): fatal error, failed to attach to device
(da10:isp1:0:133:28905): lost device
(da10:isp1:0:133:28905): removing device entry
(da11:isp1:0:138:1241): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da11:isp1:0:138:1241): ILLEGAL REQUEST asc:25,0
(da11:isp1:0:138:1241): Logical unit not supported field replaceable unit: 1
(da11:isp1:0:138:1241): fatal error, failed to attach to device
(da11:isp1:0:138:1241): lost device
(da11:isp1:0:138:1241): removing device entry




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9907021829450.356-100000>