Date: Fri, 28 Feb 1997 15:34:00 -0800 From: rvega@cicese.mx (Raymundo Vega Aguilar) To: freebsd-scsi@FreeBSD.org, mike@sentex.net Subject: Re: adaptec 2940 Message-ID: <199702282334.PAA01768@knuth.cicese.mx>
next in thread | raw e-mail | index | archive | help
> From owner-freebsd-scsi@freefall.freebsd.org Fri Feb 28 15:10:59 1997 > X-Sender: mdtancsa@sentex.net > Date: Fri, 28 Feb 1997 17:48:08 -0500 > To: freebsd-scsi@FreeBSD.org > From: Mike Tancsa <mike@sentex.net> > Subject: Re: adaptec 2940 > Mime-Version: 1.0 > X-Loop: FreeBSD.org > > At 04:32 PM 2/28/97 -0600, Daniel M. Eischen wrote: > > > >> Hello, i'm posting this message here after tried the questions > >> group without any luck. > > > >> The problem i have with my sistem is that at boot time it does not find > >> the scsi card, its an adaptec 2940 pci board, but when i boot on msdos > >> no problem there, the ezscsi program sees it immediatly. > >> > >> is there something i am not doing right?? > >> > >> if you need it the system is a pentium 100 Mhz, 32 Meg, 1.3 gig ide, > >> soundblaster, cdrom (ide), ne2000 clone. > > > >You need to provide more information - like what version of > >FreeBSD you're using and maybe a dmesg output. > > > >You're probably running 2.1.5 or previous and have a 2940AU > >adapter - only FreeBSD 2.1.6 and subsequent support these > >adapters. > > > Also, make sure that you enable "Plug and Play SCAM support" on the SCSI > card if it is the newer 2940AU.... > > > ---Mike > ********************************************************************** > Mike Tancsa (mike@sentex.net) * To do is to be -- Nietzsche > Sentex Communications Corp, * To be is to do -- Sartre > Cambridge, Ontario * Do be do be do -- Sinatra > (http://www.sentex.net/~mdtancsa) * >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199702282334.PAA01768>