Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 16 Jan 2004 11:01:54 -0800 (PST)
From:      Jamie Bowden <ragnar@sysabend.org>
To:        current@FreeBSD.org
Subject:   Abit IC7 and 5.2-RELEASE
Message-ID:  <20040116102424.X78161-100000@moo.sysabend.org>
In-Reply-To: <20040106180048.G78161-100000@moo.sysabend.org>

next in thread | previous in thread | raw e-mail | index | archive | help

I posted a dmesg from 5.2-RC, and not much has changed WRT 5.2 becoming
-RELEASE.  I went ahead and enabled the onboard sound chip (6 channel 5.1
Surround capable) and the IR port.  Both are detected and appear to
function fine with 5.2-RELEASE.  I don't use ECC RAM in this machine, but
for those of you looking for a decent Intel chipset motherboard that does,
this one can.

Relevant bits of dmesg:

FreeBSD 5.2-RELEASE #7: Tue Jan 13 18:53:17 EST 2004

...

pcm0: <Intel ICH5 (82801EB)> port 0xdc00-0xdc3f,0xd800-0xd8ff mem
0xec103000-0xec1030ff,0xec102000-0xec1021ff irq 17 at device 31.5 on pci0
pcm0: <Avance Logic ALC650 AC97 Codec>

...

sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A

...

My case doesn't have IR port hardware on it to plug into the socket on the
motherboard, but since sio1 attaches okay with it enabled, the assumption
is that birda would work fine with it.

It looks like at least Abit's base IC7 i875p chipset motherboard works
100% from a detection and driver standpoint.

There are a couple of variants on this motherboard, the most likely would
be the IC7-G, which is identical to what I have but adds an onboard Intel
GBit NIC (and there are two or three different potential chips, depending
on exactly which model of mobo you choose.  I don't know the state of the
Intel GBIC driver, so I can't comment on support for those.)

I don't have multiple SATA drives to check how well the built SATA RAID (0
only) function works unfortunately, so I can't comment on that either.
Running from a single SATA/150 drive is nice and speedy.

Another variant (IC7-G for sure, and potentially others) also adds an
onboard Silicon Image Dual Channel SATA RAID capable (0/1/0+1 only)
controller (for a total of 4 SATA channels instead of two).

If you care about a full dmesg, you can hunt down my previous post about
5.2-RC which shows everything else.  The only difference will be the
reported kernel version, the addition of pcm0, and sio1 is now attached
instead of being reported as missing from bitmap of probed IRQs.

Jamie Bowden

-- 
"It was half way to Rivendell when the drugs began to take hold"
Hunter S Tolkien "Fear and Loathing in Barad Dur"
Iain Bowen <alaric@alaric.org.uk>




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040116102424.X78161-100000>