Date: Thu, 18 Apr 2013 18:52:28 +0100 From: Nicolas de Bari Embriz Garcia Rojas <nbari@inbox.im> To: freebsd-hackers@freebsd.org Subject: [SOLVED] home lab [AMD A10 5800K , AsRock FM2A85X-ITX] panics too much Message-ID: <A4B8EBD4-EFF3-45D5-B2C1-96A93D8AB0C1@inbox.im> In-Reply-To: <122807B5-16CD-4F55-AB90-FB2ED433C425@inbox.im> References: <122807B5-16CD-4F55-AB90-FB2ED433C425@inbox.im>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, the solution was to properly set the voltages of the memory on the =
BIOS.
memory on BIOS was configured to only use 1.25. and the specs of the =
memory say it required 1.5, setting the proper values on the BIOS did =
the trick.
regards.
On Apr 8, 2013, at 4:22 AM, Nicolas de Bari Embriz Garcia Rojas =
<nbari@inbox.im> wrote:
> Hi, all, I am having many kernel panic with an AMD A10 5800K cpu and a =
AsRock FM2A85X-ITX motherboard.=20
>=20
> I successfully installed FreeBSD 9.1 amd64 with zfs raidz on root, =
but when installing subversion from ports (make install clean), here my =
first kernel painc occurred. After the machine was online again I =
finished (make install clean) and well this time worked.=20
>=20
> I update the sources svn =85. and tried a make -j4 buildworld, it =
started to build but later the machine just freeze.=20
>=20
> I later tried without the -j4 and was available to compile the world.
>=20
> when compiling the kernel (make kernel) I got another kernel panic and =
machine rebooted.
>=20
> This time before booting, I tried to fix the bios setting the the OC =
(overclook) features on the motherboard to match the hardware avoiding =
fancy things, and well some times now I get panics others not.
>=20
> I enable dumpdev=3D"AUTO" in rc.conf, but problem is that I have all =
swap on the 'zfs' and I am not getting the dumps.
>=20
> So wondering if some one could give me an advice of how could I fine =
tune my system so that I can use this hardware.
>=20
> the logs unfortunately don't show nothing I have enable *.* =
/var/log/all.log on syslog.conf but don't show anything related to the =
panics.
>=20
> Any ideas ?
>=20
> below I let the output of dmesg.boot and pciconf
>=20
> 1 Copyright (c) 1992-2013 The FreeBSD Project. =
=
=20
> 2 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, =
1994 =
=20
> 3 The Regents of the University of California. All rights reserved. =
=
=20
> 4 FreeBSD is a registered trademark of The FreeBSD Foundation. =
=
=20
> 5 FreeBSD 9.1-STABLE #2 r249231: Sun Apr 7 13:36:17 UTC 2013 =
=
=20
> 6 root@amdtest:/usr/obj/usr/src/sys/amdtest amd64 =
=
=20
> 7 FreeBSD clang version 3.2 (tags/RELEASE_32/final 170710) 20121221 =
=
=20
> 8 CPU: AMD A10-5800K APU with Radeon(tm) HD Graphics (4192.46-MHz =
K8-class CPU) =
=20
> 9 Origin =3D "AuthenticAMD" Id =3D 0x610f01 Family =3D 0x15 =
Model =3D 0x10 Stepping =3D 1 =
=20
> 10 =
Features=3D0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> =
=20
> 11 =
Features2=3D0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POP=
CNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> =
=20
> 12 AMD Features=3D0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> =
=
=20
> 13 AMD =
Features2=3D0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW=
,IBS,XOP,SKINIT,WDT,LWP,FMA4,<b17>,NodeId,TBM,Topology,<b23>,<b24>> =
=20
> 14 Standard Extended Features=3D0x8 =
=
=20
> 15 TSC: P-state invariant, performance statistics =
=
=20
> 16 real memory =3D 17179869184 (16384 MB) =
=
=20
> 17 avail memory =3D 16455127040 (15692 MB) =
=
=20
> 18 Event timer "LAPIC" quality 400 =
=
=20
> 19 ACPI APIC Table: <ALASKA A M I> =
=
=20
> 20 FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs =
=
=20
> 21 FreeBSD/SMP: 1 package(s) x 4 core(s) =
=
=20
> 22 cpu0 (BSP): APIC ID: 16 =
=
=20
> 23 cpu1 (AP): APIC ID: 17 =
=
=20
> 24 cpu2 (AP): APIC ID: 18 =
=
=20
> 25 cpu3 (AP): APIC ID: 19 =
=
=20
> 26 WARNING: VIMAGE (virtualized network stack) is a highly =
experimental feature. =
=20
> 27 ACPI Warning: Optional field Pm2ControlBlock has zero address or =
length: 0x0000000000000000/0x1 (20110527/tbfadt-583) =
=20
> 28 ioapic0 <Version 2.1> irqs 0-23 on motherboard =
=
=20
> 29 kbd1 at kbdmux0 =
=
=20
> 30 aesni0: <AES-CBC,AES-XTS> on motherboard =
=
=20
> 31 cryptosoft0: <software crypto> on motherboard =
=
=20
> 32 acpi0: <ALASKA A M I> on motherboard =
=
=20
> 33 acpi0: Power Button (fixed) =
=
=20
> 34 cpu0: <ACPI CPU> on acpi0 =
=
=20
> 35 cpu1: <ACPI CPU> on acpi0 =
=
=20
> 36 cpu2: <ACPI CPU> on acpi0 =
=
=20
> 37 cpu3: <ACPI CPU> on acpi0 =
=
=20
> 38 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 =
=
=20
> 39 Timecounter "i8254" frequency 1193182 Hz quality 0 =
=
=20
> 40 Event timer "i8254" frequency 1193182 Hz quality 100 =
=
=20
> 41 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 =
=
=20
> 42 Event timer "RTC" frequency 32768 Hz quality 0 =
=
=20
> 43 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on =
acpi0 =
=20
> 44 Timecounter "HPET" frequency 14318180 Hz quality 950 =
=
=20
> 45 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 =
=
=20
> 46 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on =
acpi0 =
=20
> 47 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 =
=
=20
> 48 pci0: <ACPI PCI bus> on pcib0 =
=
=20
> 49 pci0: <base peripheral> at device 0.2 (no driver attached) =
=
=20
> 50 vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem =
0xfc000000-0xfdffffff,0xff700000-0xff73ffff irq 17 at device 1.0 on pci0 =
=20
> 51 pci0: <multimedia, HDA> at device 1.1 (no driver attached) =
=
=20
> 52 pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0 =
=
=20
> 53 pci1: <ACPI PCI bus> on pcib1 =
=
=20
> 54 em0: <Intel(R) PRO/1000 Network Connection 7.3.7> port =
0xe000-0xe01f mem =
0xff6c0000-0xff6dffff,0xff600000-0xff67ffff,0xff6e0000-0xff6e3fff irq 18 =
at device 0.0 on pci1 =20
> 55 em0: Using MSIX interrupts with 3 vectors =20
> 56 em0: Ethernet address: 68:05:ca:11:d3:2c =
=
=20
> 57 xhci0: <XHCI (generic) USB 3.0 controller> mem =
0xff74a000-0xff74bfff irq 18 at device 16.0 on pci0 =
=20
> 58 xhci0: 32 byte context size. =
=
=20
> 59 usbus0 on xhci0 =
=
=20
> 60 xhci1: <XHCI (generic) USB 3.0 controller> mem =
0xff748000-0xff749fff irq 17 at device 16.1 on pci0 =
=20
> 61 xhci1: 32 byte context size. =
=
=20
> 62 usbus1 on xhci1 =
=
=20
> 63 ahci0: <AMD Hudson-2 AHCI SATA controller> port =
0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f =
mem 0xff751000-0xff7517ff irq 19 at device 17.0 on pci0 =20
> 64 ahci0: AHCI v1.30 with 5 6Gbps ports, Port Multiplier supported =
=
=20
> 65 ahcich0: <AHCI channel> at channel 0 on ahci0 =
=
=20
> 66 ahcich1: <AHCI channel> at channel 1 on ahci0 =
=
=20
> 67 ahcich2: <AHCI channel> at channel 2 on ahci0 =
=
=20
> 68 ahcich3: <AHCI channel> at channel 3 on ahci0 =
=
=20
> 69 ahcich4: <AHCI channel> at channel 4 on ahci0 =
=
=20
> 70 ohci0: <OHCI (generic) USB controller> mem 0xff750000-0xff750fff =
irq 18 at device 18.0 on pci0 =
=20
> 71 usbus2 on ohci0 =
=
=20
> 72 ehci0: <EHCI (generic) USB 2.0 controller> mem =
0xff74f000-0xff74f0ff irq 17 at device 18.2 on pci0 =
=20
> 73 usbus3: EHCI version 1.0 =
=
=20
> 74 usbus3 on ehci0 =
=
=20
> 75 ohci1: <OHCI (generic) USB controller> mem 0xff74e000-0xff74efff =
irq 18 at device 19.0 on pci0 =
=20
> 76 usbus4 on ohci1 =
=
=20
> 77 ehci1: <EHCI (generic) USB 2.0 controller> mem =
0xff74d000-0xff74d0ff irq 17 at device 19.2 on pci0 =
=20
> 78 usbus5: EHCI version 1.0 =
=
=20
> 79 usbus5 on ehci1 =
=
=20
> 80 pci0: <serial bus, SMBus> at device 20.0 (no driver attached) =
=
=20
> 81 pci0: <multimedia, HDA> at device 20.2 (no driver attached) =
=
=20
> 82 isab0: <PCI-ISA bridge> at device 20.3 on pci0 =
=
=20
> 83 isa0: <ISA bus> on isab0 =
=
=20
> 84 pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0 =
=
=20
> 85 pci2: <ACPI PCI bus> on pcib2 =
=
=20
> 86 ohci2: <OHCI (generic) USB controller> mem 0xff74c000-0xff74cfff =
irq 18 at device 20.5 on pci0 =
=20
> 87 usbus6 on ohci2 =
=
=20
> 88 pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0 =
=
=20
> 89 pci3: <ACPI PCI bus> on pcib3 =
=
=20
> 90 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port =
0xd000-0xd0ff mem 0xfe004000-0xfe004fff,0xfe000000-0xfe003fff irq 16 at =
device 0.0 on pci3 =20
> 91 re0: Using 1 MSI-X message =
=
=20
> 92 re0: Chip rev. 0x2c800000 =
=
=20
> 93 re0: MAC rev. 0x00000000 =
=
=20
> 94 miibus0: <MII bus> on re0 =
=
=20
> 95 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on =
miibus0 =
=20
> 96 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, =
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, =
1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-fl ow, =
1000baseT-FDX-flow-master, auto, auto-flow =
=
=20
> 97 re0: Ethernet address: bc:5f:f4:a3:25:65 =
=
=20
> 98 acpi_button0: <Power Button> on acpi0 =
=
=20
> 99 orm0: <ISA Option ROM> at iomem 0xcf800-0xd07ff on isa0 =
=
=20
> 100 sc0: <System console> at flags 0x100 on isa0 =
=
=20
> 101 sc0: VGA <16 virtual consoles, flags=3D0x300> =
=
=20
> 102 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff =
on isa0 =
=20
> 103 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 =
=
=20
> 104 atkbd0: <AT Keyboard> irq 1 on atkbdc0 =20
> 105 kbd0 at atkbd0 =
=
=20
> 106 atkbd0: [GIANT-LOCKED] =
=
=20
> 107 ctl: CAM Target Layer loaded =
=
=20
> 108 acpi_throttle0: <ACPI CPU Throttling> on cpu0 =
=
=20
> 109 hwpstate0: <Cool`n'Quiet 2.0> on cpu0 =
=
=20
> 110 acpi_throttle1: <ACPI CPU Throttling> on cpu1 =
=
=20
> 111 acpi_throttle1: failed to attach P_CNT =
=
=20
> 112 device_attach: acpi_throttle1 attach returned 6 =
=
=20
> 113 acpi_throttle2: <ACPI CPU Throttling> on cpu2 =
=
=20
> 114 acpi_throttle2: failed to attach P_CNT =
=
=20
> 115 device_attach: acpi_throttle2 attach returned 6 =
=
=20
> 116 acpi_throttle3: <ACPI CPU Throttling> on cpu3 =
=
=20
> 117 acpi_throttle3: failed to attach P_CNT =
=
=20
> 118 device_attach: acpi_throttle3 attach returned 6 =
=
=20
> 119 ZFS filesystem version: 5 =
=
=20
> 120 ZFS storage pool version: features support (5000) =
=
=20
> 121 Timecounters tick every 1.000 msec =
=
=20
> 122 vboxdrv: fAsync=3D0 offMin=3D0x44e offMax=3D0x74f =
=
=20
> 123 IPsec: Initialized Security Association Processing. =
=
=20
> 124 ipfw2 (+ipv6) initialized, divert enabled, nat loadable, default =
to accept, logging disabled =
=20
> 125 usbus0: 5.0Gbps Super Speed USB v3.0 =
=
=20
> 126 usbus1: 5.0Gbps Super Speed USB v3.0 =
=
=20
> 127 usbus2: 12Mbps Full Speed USB v1.0 =
=
=20
> 128 usbus3: 480Mbps High Speed USB v2.0 =
=
=20
> 129 usbus4: 12Mbps Full Speed USB v1.0 =
=
=20
> 130 usbus5: 480Mbps High Speed USB v2.0 =
=
=20
> 131 usbus6: 12Mbps Full Speed USB v1.0 =
=
=20
> 132 ugen0.1: <0x1022> at usbus0 =
=
=20
> 133 uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on =
usbus0 =
=20
> 134 ugen1.1: <0x1022> at usbus1 =
=
=20
> 135 uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on =
usbus1 =
=20
> 136 ugen2.1: <AMD> at usbus2 =
=
=20
> 137 uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on =
usbus2 =
=20
> 138 ugen3.1: <AMD> at usbus3 =
=
=20
> 139 uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on =
usbus3 =
=20
> 140 ugen4.1: <AMD> at usbus4 =
=
=20
> 141 uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on =
usbus4 =
=20
> 142 ugen5.1: <AMD> at usbus5 =
=
=20
> 143 uhub5: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on =
usbus5 =
=20
> 144 ugen6.1: <AMD> at usbus6 =
=
=20
> 145 uhub6: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on =
usbus6 =
=20
> 146 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 =
=
=20
> 147 ada0: <ST2000DM001-1CH164 CC24> ATA-8 SATA 3.x device =
=
=20
> 148 ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) =
=
=20
> 149 ada0: Command Queueing enabled =
=
=20
> 150 ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) =
=
=20
> 151 ada0: Previously was known as ad4 =
=
=20
> 152 ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 =
=
=20
> 153 ada1: <ST2000DM001-1CH164 CC24> ATA-8 SATA 3.x device =
=
=20
> 154 ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) =
=
=20
> 155 ada1: Command Queueing enabled =
=
=20
> 156 ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) =
=
=20
> 157 ada1: Previously was known as ad6 =
=
=20
> 158 ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 =
=
=20
> 159 ada2: <WDC WD20EARX-32PASB0 51.0AB51> ATA-8 SATA 3.x device =
=
=20
> 160 ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) =
=
=20
> 161 ada2: Command Queueing enabled =
=
=20
> 162 ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) =
=
=20
> 163 ada2: Previously was known as ad8 =
=
=20
> 164 ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 =
=
=20
> 165 ada3: <WDC WD20EZRX-00DC0B0 80.00A80> ATA-9 SATA 3.x device =
=
=20
> 166 ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) =
=
=20
> 167 ada3: Command Queueing enabled =
=
=20
> 168 ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) =
=
=20
> 169 ada3: Previously was known as ad10 =
=
=20
> 170 SMP: AP CPU #2 Launched! =
=
=20
> 171 SMP: AP CPU #1 Launched! =
=
=20
> 172 SMP: AP CPU #3 Launched! =
=
=20
> 173 Timecounter "TSC-low" frequency 2096231117 Hz quality 1000 =
=
=20
> 174 uhub6: 2 ports with 2 removable, self powered =
=
=20
> 175 uhub4: 5 ports with 5 removable, self powered =
=
=20
> 176 uhub2: 5 ports with 5 removable, self powered =
=
=20
> 177 uhub1: 4 ports with 4 removable, self powered =
=
=20
> 178 uhub0: 4 ports with 4 removable, self powered =
=
=20
> 179 Root mount waiting for: usbus5 usbus3 =
=
=20
> 180 uhub3: 5 ports with 5 removable, self powered =
=
=20
> 181 uhub5: 5 ports with 5 removable, self powered =
=
=20
> 182 Trying to mount root from zfs:zroot []... =
=
=20
> 183 bridge0: Ethernet address: 02:fe:4a:c8:9c:00 =
=
=20
> 184 bridge1: Ethernet address: 02:fe:4a:c8:9c:01 =
=
=20
> 185 epair0a: Ethernet address: 02:00:a0:00:0f:0a =
=
=20
> 186 epair0b: Ethernet address: 02:00:a0:00:10:0b =
=
=20
> 187 epair1a: Ethernet address: 02:00:a0:00:11:0a =
=
=20
> 188 epair1b: Ethernet address: 02:00:a0:00:12:0b =
=
=20
> 189 tap0: Ethernet address: 00:bd:14:26:00:00 =
=
=20
> 190 re0: link state changed to UP =20
>=20
> the output of pciconf -l is:
> hostb0@pci0:0:0:0: class=3D0x060000 card=3D0x14101849 =
chip=3D0x14101022 rev=3D0x00 hdr=3D0x00
> none0@pci0:0:0:2: class=3D0x080600 card=3D0x14191022 =
chip=3D0x14191022 rev=3D0x00 hdr=3D0x00
> vgapci0@pci0:0:1:0: class=3D0x030000 card=3D0x99011849 =
chip=3D0x99011002 rev=3D0x00 hdr=3D0x00
> none1@pci0:0:1:1: class=3D0x040300 card=3D0x99021849 =
chip=3D0x99021002 rev=3D0x00 hdr=3D0x00
> pcib1@pci0:0:2:0: class=3D0x060400 card=3D0x12341022 =
chip=3D0x14121022 rev=3D0x00 hdr=3D0x01
> xhci0@pci0:0:16:0: class=3D0x0c0330 card=3D0x78121022 =
chip=3D0x78121022 rev=3D0x03 hdr=3D0x00
> xhci1@pci0:0:16:1: class=3D0x0c0330 card=3D0x78121022 =
chip=3D0x78121022 rev=3D0x03 hdr=3D0x00
> ahci0@pci0:0:17:0: class=3D0x010601 card=3D0x78011849 =
chip=3D0x78011022 rev=3D0x40 hdr=3D0x00
> ohci0@pci0:0:18:0: class=3D0x0c0310 card=3D0x78071849 =
chip=3D0x78071022 rev=3D0x11 hdr=3D0x00
> ehci0@pci0:0:18:2: class=3D0x0c0320 card=3D0x78081849 =
chip=3D0x78081022 rev=3D0x11 hdr=3D0x00
> ohci1@pci0:0:19:0: class=3D0x0c0310 card=3D0x78071849 =
chip=3D0x78071022 rev=3D0x11 hdr=3D0x00
> ehci1@pci0:0:19:2: class=3D0x0c0320 card=3D0x78081849 =
chip=3D0x78081022 rev=3D0x11 hdr=3D0x00
> none2@pci0:0:20:0: class=3D0x0c0500 card=3D0x780b1849 =
chip=3D0x780b1022 rev=3D0x14 hdr=3D0x00
> none3@pci0:0:20:2: class=3D0x040300 card=3D0x88921849 =
chip=3D0x780d1022 rev=3D0x01 hdr=3D0x00
> isab0@pci0:0:20:3: class=3D0x060100 card=3D0x780e1849 =
chip=3D0x780e1022 rev=3D0x11 hdr=3D0x00
> pcib2@pci0:0:20:4: class=3D0x060401 card=3D0x00000000 =
chip=3D0x780f1022 rev=3D0x40 hdr=3D0x01
> ohci2@pci0:0:20:5: class=3D0x0c0310 card=3D0x78091849 =
chip=3D0x78091022 rev=3D0x11 hdr=3D0x00
> pcib3@pci0:0:21:0: class=3D0x060400 card=3D0x00001022 =
chip=3D0x43a01022 rev=3D0x00 hdr=3D0x01
> hostb1@pci0:0:24:0: class=3D0x060000 card=3D0x00000000 =
chip=3D0x14001022 rev=3D0x00 hdr=3D0x00
> hostb2@pci0:0:24:1: class=3D0x060000 card=3D0x00000000 =
chip=3D0x14011022 rev=3D0x00 hdr=3D0x00
> hostb3@pci0:0:24:2: class=3D0x060000 card=3D0x00000000 =
chip=3D0x14021022 rev=3D0x00 hdr=3D0x00
> hostb4@pci0:0:24:3: class=3D0x060000 card=3D0x00000000 =
chip=3D0x14031022 rev=3D0x00 hdr=3D0x00
> hostb5@pci0:0:24:4: class=3D0x060000 card=3D0x00000000 =
chip=3D0x14041022 rev=3D0x00 hdr=3D0x00
> hostb6@pci0:0:24:5: class=3D0x060000 card=3D0x00000000 =
chip=3D0x14051022 rev=3D0x00 hdr=3D0x00
> em0@pci0:1:0:0: class=3D0x020000 card=3D0xa01f8086 chip=3D0x10d38086 =
rev=3D0x00 hdr=3D0x00
> re0@pci0:3:0:0: class=3D0x020000 card=3D0x81681849 chip=3D0x816810ec =
rev=3D0x06 hdr=3D0x00
>=20
>=20
>=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?A4B8EBD4-EFF3-45D5-B2C1-96A93D8AB0C1>