Date: Thu, 4 Apr 1996 16:41:09 +0200 (MET DST) From: wjw@IAEhv.nl (Willem Jan Withagen) To: hardware@freebsd.org Subject: Using micropolis 3243 with NCR810 Message-ID: <199604041441.QAA03857@iaehv.IAEhv.nl>
next in thread | raw e-mail | index | archive | help
Hi,
We're running into this strange problem where our /home gets lost
once in a while. It just stops working, just like it has disconnected
itself. Even a reboot of the system does no do the job of getting the disk
back. No, the disk has to be power-cycled, and then the system needs to
reboot.
This happens every once in a while, and way to often for our purpose.
Does anybody have similar problems or knows what to do about it.
Our config is at the end, but major elements:
FreeBSD 2.0.5
P90 Asus SP54P4 64Mb + 256Kb cache
NCR 810
Micropolis 3243
Thanx,
Willem Jan Withagen
FreeBSD 2.0.5-RELEASE #1: Tue Apr 2 09:59:31 MET DST 1996
graaf@hades.IAEhv.nl:/usr/src/sys/compile/IAEHV
CPU: 90-MHz Pentium 735\\90 (Pentium-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping=5
Features=0x1bf<FPU,VME,PSE,MCE,CX8,APIC>
real memory = 66715648 (16288 pages)
avail memory = 64204800 (15675 pages)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x280-0x29f irq 5 maddr 0xd8000 msize 16384 on isa
ed0: address 00:00:c0:29:31:a5, type WD8013EPC (16 bit)
bpf: ed0 attached
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x278-0x27f on isa
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
Probing for devices on the pci0 bus:
configuration mode 1 allows 32 devices.
pci0:0: vendor=0x1039, device=0x406, class=multimedia [not supported]
map(10): mem32(80000010)
map(14): mem64(80000010)
map(18): mem32(80000018)
map(1c): mem64(80000018)
map(20): mem32(80000020)
map(24): mem64(80000020)
pci0:1: vendor=0x1039, device=0x8, class=old [not supported]
ncr0 <ncr 53c810 scsi> rev 2 int a irq 10 on pci0:12
reg20: virtual=0xf60fc000 physical=0xfbfff000 size=0x100
ncr0: restart (scsi reset).
ncr0 scanning for targets 0..6 (V2 pl21 95/03/21)
(ncr0:0:0): "CONNER CFP1060S 1.05GB 2135" type 0 fixed SCSI 2
sd0(ncr0:0:0): Direct-Access
sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
1013MB (2074880 512 byte sectors)
sd0(ncr0:0:0): with 2756 cyls, 8 heads, and an average 94 sectors/track
(ncr0:1:0): "MICROP 2217-15MQ1001901 HQ30" type 0 fixed SCSI 2
sd1(ncr0:1:0): Direct-Access
sd1(ncr0:1:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
1685MB (3450902 512 byte sectors)
sd1(ncr0:1:0): with 2372 cyls, 15 heads, and an average 96 sectors/track
(ncr0:3:0): "MICROP 2217-15MQ1001901 HQ30" type 0 fixed SCSI 2
sd2(ncr0:3:0): Direct-Access
sd2(ncr0:3:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
1685MB (3450902 512 byte sectors)
sd2(ncr0:3:0): with 2372 cyls, 15 heads, and an average 96 sectors/track
(ncr0:4:0): "MICROP 3243-19MZ Q4D HT02" type 0 fixed SCSI 2
sd3(ncr0:4:0): Direct-Access
sd3(ncr0:4:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
4095MB (8388315 512 byte sectors)
sd3(ncr0:4:0): with 3956 cyls, 19 heads, and an average 111 sectors/track
pci0:13: vendor=0x1095, device=0x640, class=storage [not supported]
pci0: uses 256 bytes of memory from fbfff000 upto fbfff0ff.
pci0: uses 256 bytes of I/O space from e800 upto e8ff.
bpf: lo0 attached
--
Internet Access Eindhoven BV., voice: +31-40-2438330, data: +31-40-2439436
P.O. 928, 5600 AX Eindhoven, The Netherlands
Full Internet connectivity for only fl 12.95 a month.
Call now, and login as 'new'.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199604041441.QAA03857>