Date: Mon, 12 Aug 2013 19:26:53 +0200 From: "Cedric GROSS" <cg@cgross.info> To: "'Adrian Chadd'" <adrian@freebsd.org> Cc: freebsd-wireless@freebsd.org Subject: RE: [iwn]Review Split 6 Message-ID: <00c601ce9781$25060550$6f120ff0$@info> In-Reply-To: <CAJ-VmoksgY5=LmVFJyzjygJTfSEAh3wrtcf0hNVC3-d_0Hi9vQ@mail.gmail.com> References: <001d01ce9694$142db8b0$3c892a10$@info> <CAJ-VmomLTQV4vR8198XR5RrkdRrAzH%2BQj5H9QDKWJXMFhR%2Bofg@mail.gmail.com> <003c01ce96b5$15c93d40$415bb7c0$@info> <CAJ-VmoksgY5=LmVFJyzjygJTfSEAh3wrtcf0hNVC3-d_0Hi9vQ@mail.gmail.com>
index | next in thread | previous in thread | raw e-mail
> De : adrian.chadd@gmail.com [mailto:adrian.chadd@gmail.com] De la part
> de Adrian Chadd
> Envoyé : dimanche 11 août 2013 19:09
> À : Cedric GROSS
> Cc : freebsd-wireless@freebsd.org
> Objet : Re: [iwn]Review Split 6
>
> On 11 August 2013 10:06, Cedric GROSS <cg@cgross.info> wrote:
>
> > U1 stand for unit 1.
> > As you see, all function with this prefix will be call when unit==1
> > within iwn_vap_create.
> >
> > As previously, I haven't investigate a lot this side. I plan to do so
> > when standard run will be ok.
>
> Right. But what's going on, per se? Is it two separate NICs that show
> up as separate PCI devices? Or is this a hack so the firmware can
> present two virtual NICs via the firmware API?
>
Not a separate PCI device but yes ability to create 2 wlan NIC :
iwn0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
ether 60:36:dd:93:34:56
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng
status: associated
wlan0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0
mtu 1500
ether 60:36:dd:93:34:56
inet 192.168.1.20 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet MCS mode 11ng
status: associated
ssid WLenine channel 5 (2432 MHz 11g ht/20) bssid 00:24:d4:97:80:20
country US authmode WPA2/802.11i privacy ON deftxkey UNDEF
AES-CCM 2:128-bit txpower 15 bmiss 10 scanvalid 450 bgscan
bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 64 protmode CTS
ampdulimit 64k -amsdutx amsdurx shortgi wme roaming MANUAL bintval
96
wlan1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 60:36:dd:93:34:57
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
ssid "" channel 5 (2432 MHz 11g ht/20)
country US authmode OPEN privacy OFF txpower 15 bmiss 10 scanvalid
60
bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 64
protmode CTS ampdulimit 8k -amsdutx amsdurx shortgi wme bintval 0
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?00c601ce9781$25060550$6f120ff0$>