Date: Sat, 17 Jan 2004 10:59:13 -0800 From: Chris Pressey <cpressey@catseye.mine.nu> To: zhangweiwu@realss.com Cc: freebsd-questions@freebsd.org Subject: Re: install 5.2 on Thinkpad T40 fxp problem Message-ID: <20040117105913.2e6725d8.cpressey@catseye.mine.nu> In-Reply-To: <Law11-F101qouLS7h21000185bf@hotmail.com> References: <Law11-F101qouLS7h21000185bf@hotmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 18 Jan 2004 02:22:32 +0800 "Zhang Weiwu" <weiwuzhang@hotmail.com> wrote: > Hello. I read some FreeBSD on Thinkpad T40 storis (prior to 5.2), these > guys have luckly have almost everything working! > > Now I just brought a new T40. The first problem is fxp0 autodetected and > always timeout: > fxp0: device timeout > fxp0 timeout on whatever network operation (ping, dhclient etc). > I'm sure the cable, the network and the connector is okay, only it is a > 10BaseT ethernet. > > #dmesg | grep fxp > fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0x8000-0x803f mem > 0xc0201000-0xc0201fff irq 11 at device 8.0 on pci2 > fxp0: Ethernet address 00:0d:60:12:c3:61 > miibus0: <MII bus> on fxp0 > #ifconfig fxp0 > fxp0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 > ether 00:0d:60:12:c3:61 > media: Ethernet autoselect (10baseT/UTP) > status: active > > I noticed lots of other devices are using irq 11 too, don't know if it can > be a problem: > uhci1: irq 11 > uhci2: irq 11 > cbb0: irq 11 > cbb1: irq 11 > > Please give me a hint how to go on! Thank you. Maybe this page will help provide some insight? "resolving IRQ conflicts in FreeBSD on a ThinkPad A20m" http://www.paulbeard.org/movabletype/archives/000415.html -Chris
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040117105913.2e6725d8.cpressey>