Date: Tue, 24 Oct 2000 11:39:48 +0600 From: Yuri Vorobyev <vorob@yamalinfo.ru> To: "Justin T. Gibbs" <gibbs@scsiguy.com> Cc: freebsd-stable@FreeBSD.ORG Subject: Re[2]: some strange things with ahc Message-ID: <7889383446.20001024113948@yamalinfo.ru> In-Reply-To: <200010232338.e9NNclw65674@aslan.scsiguy.com> References: <200010232338.e9NNclw65674@aslan.scsiguy.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello!
вторник, 24 октября 2000 г., you wrote:
>>Hello!
>>
>> After last cvsup i noticed a strange things in dmesg:
JTG> Boot -v and send me the complete dmesg output. That should tell me
JTG> what is going on.
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1.1-STABLE #6: Mon Oct 16 20:45:14 YEKST 2000
root@www.yamalinfo.ru:/usr/src/sys/compile/WWW
Calibrating clock(s) ... TSC clock: 198649991 Hz, i8254 clock: 1193093 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium Pro (198.67-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping = 9
Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV>
real memory = 67108864 (65536K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x002ac000 - 0x03ff7fff, 64274432 bytes (15692 pages)
avail memory = 62734336 (61264K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fd8c0
bios32: Entry = 0xfd8d0 (c00fd8d0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xd8f1
pnpbios: Found PnP BIOS data at 0xc00fa860
pnpbios: Entry = f0000:a960 Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc0293000.
Pentium Pro MTRR support enabled
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12378086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12378086)
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x1237, revid=0x02
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x1229, revid=0x02
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base fe9fe000, size 12
map[14]: type 1, range 32, base 0000f800, size 5
map[18]: type 1, range 32, base fe800000, size 20
found-> vendor=0x9004, dev=0x8078, revid=0x00
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 0000fc00, size 8
map[14]: type 1, range 32, base fe9ff000, size 12
found-> vendor=0x8086, dev=0x7000, revid=0x01
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7010, revid=0x00
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000ffa0, size 4
found-> vendor=0x1013, dev=0x00a0, revid=0x22
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base f7000000, size 24
pci0: <PCI bus> on pcib0
Correcting Natoma config for non-SMP
Correcting Natoma config for non-SMP
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xf800-0xf81f mem
0xfe800000-0xfe8fffff,0xfe9fe000-0xfe9fefff irq 9 at device 10.0 on pci0
fxp0: Ethernet address 00:a0:c9:55:f1:4c
bpf: fxp0 attached
ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0xfc00-0xfcff mem 0xfe9ff000-0xfe9fffff irq 11 at
device 13.0 on pci0
ahc0: Reading SEEPROM...checksum error
ahc0: No SEEPROM available.
ahc0: Using left over BIOS settings
ahc0: Downloading Sequencer Program... 437 instructions downloaded
aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs
isab0: <Intel 82371SB PCI to ISA bridge> at device 18.0 on pci0
I/O Recovery Timing: 8-bit 1 clocks, 16-bit 1 clocks
Extended BIOS: enabled
Lower BIOS: enabled
Coprocessor IRQ13: enabled
Mouse IRQ12: disabled
Interrupt Routing: A: disabled, B: IRQ9, C: IRQ11, D: disabled
MB0: IRQ15, MB1:
isa0: <ISA bus> on isab0
pci0: <Intel PIIX3 ATA controller> (vendor=0x8086, dev=0x7010) at 18.1
pci0: <Cirrus Logic GD5430 SVGA controller> (vendor=0x1013, dev=0x00a0) at 20.0
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
isa_probe_children: probing PnP devices
BIOS Geometries:
0:0228fe3f 0..552=553 cylinders, 0..254=255 heads, 1..63=63 sectors
1:0228fe3f 0..552=553 cylinders, 0..254=255 heads, 1..63=63 sectors
2:0104fe3f 0..260=261 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to
accept, unlimited logging
bpf: ppp0 attached
new masks: bio 680040, tty 63001a, net 67021a
bpf: sl0 attached
bpf: lo0 attached
Waiting 5 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(ahc0:A:4:0): Sending SDTR period 19, offset f
(ahc0:A:4:0): Received SDTR period 19, offset f
Filtered to period 19, offset f
ahc0: target 4 synchronous at 10.0MHz, offset = 0xf
(ahc0:A:2:0): Sending SDTR period 19, offset f
(ahc0:A:2:0): Received SDTR period 19, offset f
Filtered to period 19, offset f
ahc0: target 2 synchronous at 10.0MHz, offset = 0xf
(ahc0:A:1:0): Sending SDTR period 19, offset f
(ahc0:A:1:0): Received SDTR period 19, offset f
Filtered to period 19, offset f
ahc0: target 1 synchronous at 10.0MHz, offset = 0xf
Creating DISK da0
Creating DISK da1
Creating DISK da2
pass0 at ahc0 bus 0 target 1 lun 0
pass0: <SEAGATE ST34572N 0784> Fixed Direct Access SCSI-2 device
pass0: Serial Number JK2938200WVMGW
pass0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
pass1 at ahc0 bus 0 target 2 lun 0
pass1: <SEAGATE ST34572N 0784> Fixed Direct Access SCSI-2 device
pass1: Serial Number JK3099450WB5TF
pass1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
pass2 at ahc0 bus 0 target 4 lun 0
pass2: <SEAGATE ST32151N 0154> Fixed Direct Access SCSI-2 device
pass2: Serial Number 00394917
pass2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0 at ahc0 bus 0 target 1 lun 0
da0: <SEAGATE ST34572N 0784> Fixed Direct Access SCSI-2 device
da0: Serial Number JK2938200WVMGW
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 4340MB (8888924 512 byte sectors: 64H 32S/T 4340C)
da1 at ahc0 bus 0 target 2 lun 0
da1: <SEAGATE ST34572N 0784> Fixed Direct Access SCSI-2 device
da1: Serial Number JK3099450WB5TF
da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da1: 4340MB (8888924 512 byte sectors: 64H 32S/T 4340C)
da2 at ahc0 bus 0 target 4 lun 0
da2: <SEAGATE ST32151N 0154> Fixed Direct Access SCSI-2 device
da2: Serial Number 00394917
da2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da2: 2049MB (4197405 512 byte sectors: 64H 32S/T 2049C)
Mounting root from ufs:/dev/da0s1a
da0s1: type 0xa5, start 63, end = 8883944, size 8883882 : OK
start_init: trying /sbin/init
da2s1: type 0xa5, start 63, end = 4192964, size 4192902 : OK
da2s1: type 0xa5, start 63, end = 4192964, size 4192902 : OK
--
Yuri Vorobyev vorob@yamalinfo.ru
www.yamalinfo.ru +7-34922-47791
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7889383446.20001024113948>