Date: Sun, 22 Jun 2008 23:02:51 +0100 From: "Thomas Sparrevohn" <Thomas.Sparrevohn@btinternet.com> To: <freebsd-usb@freebsd.org> Subject: rum driver triggers panic after wlan update Message-ID: <000301c8d4b3$b79503d0$26bf0b70$@Sparrevohn@btinternet.com>
next in thread | raw e-mail | index | archive | help
This is a multipart message in MIME format.
------=_NextPart_000_0004_01C8D4BC.19596BD0
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
Hi
Before I send a pr in - I just wanted to check whether the issue is known
A seemly random period time after I plugin the rum0 device the kernel
crashes
rum0: <Belkin Belkin 54g USB Network Adapter, class 0/0, rev 2.00/0.01, addr
5> on uhub1
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528
rum0: WARNING: using obsoleted IFF_NEEDSGIANT flag
rum0: bpf attached
rum0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
rum0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps
36Mbps 48Mbps 54Mbps
wlan0: bpf attached
wlan0: Ethernet address: 00:17:3f:72:40:90
wlan0: bpf attached
rum0: need multicast update callback
rum0: need multicast update callback
Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address = 0x40
fault code = supervisor read data, page not present
instruction pointer = 0x8:0xffffffff803e082e
stack pointer = 0x10:0xffffffffd75bfb50
frame pointer = 0x10:0xffffffffd75bfb80
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 12 (irq22: ehci0)
It I boot the machine USB rum0 device attached - The crash comes normally
pretty instantaneously (dmesg_8.txt)
wlan0: Ethernet address: 00:17:3f:72:40:90
rum0: need multicast update callback
rum0: could not transmit buffer: SHORT_XFER
Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address = 0x8
fault code = supervisor read data, page not present
instruction pointer = 0x8:0xffffffff803e0712
stack pointer = 0x10:0xffffffffd75bfb50
frame pointer = 0x10:0xffffffffd75bfb80
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 12 (irq22: ehci0)
Physical memory: 4076 MB
Dumping 317 MB: 302 286 270 254 238 222 206 190 174 158 142 126 110 94 78 62
46 30 14
If I use a kernel without debugging - the kernel simply freezes totally - no
panic - no nothing - does anybody have any idea?
------=_NextPart_000_0004_01C8D4BC.19596BD0
Content-Type: text/plain;
name="dmesg.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="dmesg.txt"
Copyright (c) 1992-2008 The FreeBSD Project.=0ACopyright (c) 1979, 1980, 19=
83, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A The Regents of the Universi=
ty of California. All rights reserved.=0AFreeBSD is a registered trademark =
of The FreeBSD Foundation.=0AFreeBSD 8.0-CURRENT #2: Sat Jun 21 11:20:35 BS=
T 2008=0A root@w2fzz0vc03.aah-go-on.com:/usr/obj/usr/home/sandbox/debug2=
/src/sys/GENERIC_DTRACE=0AWARNING: WITNESS option enabled, expect reduced p=
erformance.=0APreloaded elf kernel "/boot/kernel/kernel" at 0xffffffff810fa=
000.=0APreloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff810fa1f8.=
=0APreloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff810f=
a8a0.=0APreloaded elf obj module "/boot/kernel/geom_mirror.ko" at 0xfffffff=
f810faed0.=0APreloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xf=
fffffff810fb580.=0ATimecounter "i8254" frequency 1193182 Hz quality 0=0ACal=
ibrating TSC clock ... TSC clock: 3192053112 Hz=0ACPU: Intel(R) Core(TM)2 Q=
uad CPU @ 2.66GHz (3192.05-MHz K8-class CPU)=0A Origin =3D "Genu=
ineIntel" Id =3D 0x6f7 Stepping =3D 7=0A Features=3D0xbfebfbff<FPU,VME,D=
E,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,=
ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>=0A Features2=3D0xe3bd<SSE3,DTES64,MO=
N,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>=0A AMD Features=3D0x20100800<SY=
SCALL,NX,LM>=0A AMD Features2=3D0x1<LAHF>=0A Cores per package: 4=0Ausabl=
e memory =3D 4274376704 (4076 MB)=0APhysical memory chunk(s):=0A0x000000000=
0001000 - 0x000000000009bfff, 634880 bytes (155 pages)=0A0x00000000011fa000=
- 0x0000000096333fff, 2501091328 bytes (610618 pages)=0A0x0000000100000000=
- 0x000000015ffeffff, 1610547200 bytes (393200 pages)=0Aavail memory =3D =
4099776512 (3909 MB)=0AACPI APIC Table: <DELL B8K >=0AINTR: Adding loc=
al APIC 1 as a target=0AINTR: Adding local APIC 2 as a target=0AINTR: Addin=
g local APIC 3 as a target=0AFreeBSD/SMP: Multiprocessor System Detected: 4=
CPUs=0A cpu0 (BSP): APIC ID: 0=0A cpu1 (AP): APIC ID: 1=0A cpu2 (AP): AP=
IC ID: 2=0A cpu3 (AP): APIC ID: 3=0AAPIC: CPU 0 has ACPI ID 1=0AAPIC: CPU=
1 has ACPI ID 2=0AAPIC: CPU 2 has ACPI ID 3=0AAPIC: CPU 3 has ACPI ID 4=0A=
ULE: setup cpu 0=0AULE: setup cpu 1=0AULE: setup cpu 2=0AULE: setup cpu 3=
=0AThis module (opensolaris) contains code covered by the=0ACommon Developm=
ent and Distribution License (CDDL)=0Asee http://opensolaris.org/os/licensi=
ng/opensolaris_license/=0AACPI: RSDP @ 0x0xfebf0/0x0024 (v 2 DELL )=0AACP=
I: XSDT @ 0x0xfd0b9/0x0064 (v 1 DELL B8K 0x00000014 ASL 0x00000061=
)=0AACPI: FACP @ 0x0xfd191/0x00F4 (v 3 DELL B8K 0x00000014 ASL 0x0=
0000061)=0AACPI: DSDT @ 0x0xfffc13b6/0x3F25 (v 1 DELL dt_ex 0x0000100=
0 INTL 0x20050624)=0AACPI: FACS @ 0x0x9fdbcc00/0x0040=0AACPI: SSDT @ 0x0xff=
fc52db/0x0099 (v 1 DELL st_ex 0x00001000 INTL 0x20050624)=0AACPI: API=
C @ 0x0xfd285/0x0092 (v 1 DELL B8K 0x00000014 ASL 0x00000061)=0AAC=
PI: BOOT @ 0x0xfd317/0x0028 (v 1 DELL B8K 0x00000014 ASL 0x0000006=
1)=0AACPI: MCFG @ 0x0xfd33f/0x003E (v 1 DELL B8K 0x00000014 ASL 0x=
00000061)=0AACPI: HPET @ 0x0xfd37d/0x0038 (v 1 DELL B8K 0x00000014 =
ASL 0x00000061)=0AACPI: DUMY @ 0x0x9fdbec00/0x0024 (v 1 DELL B8K 0=
x00000014 ASL 0x00000061)=0AACPI: SLIC @ 0x0xfd3b5/0x0176 (v 1 DELL B8=
K 0x00000014 ASL 0x00000061)=0AMADT: Found IO APIC ID 8, Interrupt 0 a=
t 0xfec00000=0Aioapic0: Changing APIC ID to 8=0Aioapic0: Routing external 8=
259A's -> intpin 0=0AMADT: Interrupt override: source 0, irq 2=0Aioapic0: R=
outing IRQ 0 -> intpin 2=0AMADT: Interrupt override: source 9, irq 9=0Aioap=
ic0: intpin 9 trigger: level=0Alapic: Routing NMI -> LINT1=0Alapic: LINT1 t=
rigger: level=0Alapic: LINT1 polarity: high=0Aioapic0 <Version 1.1> irqs 0-=
23 on motherboard=0Alapic0: Forcing LINT1 to edge trigger=0Acpu0 BSP:=0A =
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff=0A lint=
0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff=0A timer: =
0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000=0Awlan: <802.1=
1 Link Layer>=0Aath_rate: version 1.2 <SampleRate bit-rate selection algori=
thm>=0Akbd: new array size 4=0Akbd1 at kbdmux0=0Amem: <memory>=0Anfslock: p=
seudo-device=0Anull: <null device, zero device>=0Arandom: <entropy source, =
Software, Yarrow>=0Aio: <I/O>=0Aath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, =
RF5111, RF5112, RF2413, RF5413)=0Ahptrr: RocketRAID 17xx/2xxx SATA controll=
er driver v1.2 (Jun 21 2008 11:20:03)=0Aacpi0: <DELL B8K > on motherboar=
d=0Aioapic0: routing intpin 9 (ISA IRQ 9) to vector 48=0Aacpi0: [MPSAFE]=0A=
acpi0: [ITHREAD]=0Aacpi0: Power Button (fixed)=0Aacpi_bus_number: root bus =
has no _BBN, assuming 0=0AAcpiOsDerivePciId: \\_SB_.PCI0.ISA_.P40C -> bus 0=
dev 10 func 0=0Aacpi0: reservation of 0, a0000 (3) failed=0Aacpi0: reserva=
tion of 100000, f00000 (3) failed=0Aacpi0: reservation of 1000000, 9edbcc00=
(3) failed=0AACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10=0AT=
imecounter "ACPI-fast" frequency 3579545 Hz quality 1000=0Aacpi_timer0: <24=
-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0=0Apci_link0: =
Index IRQ Rtd Ref IRQs=0A Initial Probe 0 11 N 0 3 4 5 =
6 7 9 10 11 12 15=0A Validation 0 11 N 0 3 4 5 6 7 9 10 =
11 12 15=0A After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15=
=0Apci_link1: Index IRQ Rtd Ref IRQs=0A Initial Probe 0 =
10 N 0 3 4 5 6 7 9 10 11 12 15=0A Validation 0 10 N =
0 3 4 5 6 7 9 10 11 12 15=0A After Disable 0 255 N 0 3 4=
5 6 7 9 10 11 12 15=0Apci_link2: Index IRQ Rtd Ref IRQs=0A Ini=
tial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12 15=0A Validation =
0 9 N 0 3 4 5 6 7 9 10 11 12 15=0A After Disable 0=
255 N 0 3 4 5 6 7 9 10 11 12 15=0Apci_link3: Index IRQ Rt=
d Ref IRQs=0A Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12=
15=0A Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 15=0A A=
fter Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15=0Apci_link4: =
Index IRQ Rtd Ref IRQs=0A Initial Probe 0 11 N 0 =
3 4 5 6 7 9 10 11 12 15=0A Validation 0 11 N 0 3 4 5 6 7=
9 10 11 12 15=0A After Disable 0 255 N 0 3 4 5 6 7 9 10 11 =
12 15=0Apci_link5: Index IRQ Rtd Ref IRQs=0A Initial Probe =
0 10 N 0 3 4 5 6 7 9 10 11 12 15=0A Validation 0 10 =
N 0 3 4 5 6 7 9 10 11 12 15=0A After Disable 0 255 N 0=
3 4 5 6 7 9 10 11 12 15=0Apci_link6: Index IRQ Rtd Ref IRQs=0A=
Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12 15=0A Validat=
ion 0 9 N 0 3 4 5 6 7 9 10 11 12 15=0A After Disable =
0 255 N 0 3 4 5 6 7 9 10 11 12 15=0Apci_link7: Index IR=
Q Rtd Ref IRQs=0A Initial Probe 0 255 N 0 3 4 5 6 7 9 10 =
11 12 15=0A Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 15=
=0A After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15=0Apci_li=
nk8: Index IRQ Rtd Ref IRQs=0A Initial Probe 0 9 N =
0 3 4 5 6 7 9 10 11 12 15=0A Validation 0 9 N 0 3 4=
5 6 7 9 10 11 12 15=0A After Disable 0 255 N 0 3 4 5 6 7 9 =
10 11 12 15=0Apci_link9: Index IRQ Rtd Ref IRQs=0A Initial Prob=
e 0 10 N 0 3 4 5 6 7 9 10 11 12 15=0A Validation 0=
10 N 0 3 4 5 6 7 9 10 11 12 15=0A After Disable 0 255 N=
0 3 4 5 6 7 9 10 11 12 15=0Apci_link10: Index IRQ Rtd Ref I=
RQs=0A Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 15=0A V=
alidation 0 255 N 0 3 4 5 6 7 9 10 11 12 15=0A After Disa=
ble 0 255 N 0 3 4 5 6 7 9 10 11 12 15=0Apci_link11: Ind=
ex IRQ Rtd Ref IRQs=0A Initial Probe 0 11 N 0 3 4 5 6 7=
9 10 11 12 15=0A Validation 0 11 N 0 3 4 5 6 7 9 10 11 =
12 15=0A After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15=0Ap=
ci_link12: Index IRQ Rtd Ref IRQs=0A Initial Probe 0 11 =
N 0 3 4 5 6 7 9 10 11 12 15=0A Validation 0 11 N 0=
3 4 5 6 7 9 10 11 12 15=0A After Disable 0 255 N 0 3 4 5 6=
7 9 10 11 12 15=0Apci_link13: Index IRQ Rtd Ref IRQs=0A Initial=
Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 15=0A Validation =
0 10 N 0 3 4 5 6 7 9 10 11 12 15=0A After Disable 0 25=
5 N 0 3 4 5 6 7 9 10 11 12 15=0Apci_link14: Index IRQ Rtd R=
ef IRQs=0A Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12 15=
=0A Validation 0 9 N 0 3 4 5 6 7 9 10 11 12 15=0A Afte=
r Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15=0Apci_link15: =
Index IRQ Rtd Ref IRQs=0A Initial Probe 0 14 N 0 3 4=
5 6 7 9 10 11 12 15=0A Validation 0 255 N 0 3 4 5 6 7 9 =
10 11 12 15=0A After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 =
15=0Apci_link16: Index IRQ Rtd Ref IRQs=0A Initial Probe 0=
11 N 0 3 4 5 6 7 9 10 11 12 15=0A Validation 0 11 N=
0 3 4 5 6 7 9 10 11 12 15=0A After Disable 0 255 N 0 3=
4 5 6 7 9 10 11 12 15=0Apci_link17: Index IRQ Rtd Ref IRQs=0A I=
nitial Probe 0 255 N 0 16=0A Validation 0 255 N =
0 16=0A After Disable 0 255 N 0 16=0Apci_link18: =
Index IRQ Rtd Ref IRQs=0A Initial Probe 0 255 N 0 17=0A =
Validation 0 255 N 0 17=0A After Disable 0 255 =
N 0 17=0Apci_link19: Index IRQ Rtd Ref IRQs=0A Initial Prob=
e 0 255 N 0 18=0A Validation 0 255 N 0 18=
=0A After Disable 0 255 N 0 18=0Apci_link20: Index IR=
Q Rtd Ref IRQs=0A Initial Probe 0 255 N 0 19=0A Validati=
on 0 255 N 0 19=0A After Disable 0 255 N 0 =
19=0Apci_link21: Index IRQ Rtd Ref IRQs=0A Initial Probe 0=
255 N 0 16=0A Validation 0 255 N 0 16=0A After =
Disable 0 255 N 0 16=0Apci_link22: Index IRQ Rtd Ref=
IRQs=0A Initial Probe 0 255 N 0 17=0A Validation =
0 255 N 0 17=0A After Disable 0 255 N 0 17=0Apci_li=
nk23: Index IRQ Rtd Ref IRQs=0A Initial Probe 0 255 N =
0 18=0A Validation 0 255 N 0 18=0A After Disable =
0 255 N 0 18=0Apci_link24: Index IRQ Rtd Ref IRQs=0A =
Initial Probe 0 255 N 0 19=0A Validation 0 255 N=
0 19=0A After Disable 0 255 N 0 19=0Apci_link25: =
Index IRQ Rtd Ref IRQs=0A Initial Probe 0 255 N 0 20 21=
22 23=0A Validation 0 255 N 0 20 21 22 23=0A After Disa=
ble 0 255 N 0 20 21 22 23=0Apci_link26: Index IRQ Rtd=
Ref IRQs=0A Initial Probe 0 255 N 0 20 21 22 23=0A Valid=
ation 0 255 N 0 20 21 22 23=0A After Disable 0 255=
N 0 20 21 22 23=0Apci_link27: Index IRQ Rtd Ref IRQs=0A =
Initial Probe 0 255 N 0 20 21 22 23=0A Validation 0=
255 N 0 20 21 22 23=0A After Disable 0 255 N 0 20 2=
1 22 23=0Apci_link28: Index IRQ Rtd Ref IRQs=0A Initial Probe =
0 255 N 0 20 21 22 23=0A Validation 0 255 N 0 =
20 21 22 23=0A After Disable 0 255 N 0 20 21 22 23=0Apci_li=
nk29: Index IRQ Rtd Ref IRQs=0A Initial Probe 0 255 N =
0 20 21 22 23=0A Validation 0 255 N 0 20 21 22 23=0A =
After Disable 0 255 N 0 20 21 22 23=0Apci_link30: Inde=
x IRQ Rtd Ref IRQs=0A Initial Probe 0 255 N 0 20 21 22 2=
3=0A Validation 0 255 N 0 20 21 22 23=0A After Disable =
0 255 N 0 20 21 22 23=0Apci_link31: Index IRQ Rtd Ref=
IRQs=0A Initial Probe 0 255 N 0 20 21 22 23=0A Validation=
0 255 N 0 20 21 22 23=0A After Disable 0 255 N =
0 20 21 22 23=0Apci_link32: Index IRQ Rtd Ref IRQs=0A Initi=
al Probe 0 255 N 0 20 21 22 23=0A Validation 0 255=
N 0 20 21 22 23=0A After Disable 0 255 N 0 20 21 22 =
23=0Apci_link33: Index IRQ Rtd Ref IRQs=0A Initial Probe 0=
255 N 0 20 21 22 23=0A Validation 0 255 N 0 20 2=
1 22 23=0A After Disable 0 255 N 0 20 21 22 23=0Apcib0: <ACP=
I Host-PCI bridge> port 0xcf8-0xcff on acpi0=0Apci0: <ACPI PCI bus> on pcib=
0=0Apci0: domain=3D0, physical bus=3D0=0Afound-> vendor=3D0x10de, dev=3D0x0=
071, revid=3D0xc1=0A domain=3D0, bus=3D0, slot=3D0, func=3D0=0A class=3D06-=
00-00, hdrtype=3D0x00, mfdev=3D1=0A cmdreg=3D0x0006, statreg=3D0x00b0, cach=
elnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=
=3D0x00 (0 ns)=0Afound-> vendor=3D0x10de, dev=3D0x007f, revid=3D0xa1=0A dom=
ain=3D0, bus=3D0, slot=3D0, func=3D1=0A class=3D05-00-00, hdrtype=3D0x00, m=
fdev=3D1=0A cmdreg=3D0x0100, statreg=3D0x0020, cachelnsz=3D0 (dwords)=0A la=
ttimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0Afound-> =
vendor=3D0x10de, dev=3D0x0075, revid=3D0xa1=0A domain=3D0, bus=3D0, slot=3D=
0, func=3D2=0A class=3D05-00-00, hdrtype=3D0x00, mfdev=3D1=0A cmdreg=3D0x00=
00, statreg=3D0x0020, cachelnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), min=
gnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0Afound-> vendor=3D0x10de, dev=3D0x=
006f, revid=3D0xa1=0A domain=3D0, bus=3D0, slot=3D0, func=3D3=0A class=3D05=
-00-00, hdrtype=3D0x00, mfdev=3D0=0A cmdreg=3D0x0100, statreg=3D0x00a0, cac=
helnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=
=3D0x00 (0 ns)=0Afound-> vendor=3D0x10de, dev=3D0x00b4, revid=3D0xa1=0A dom=
ain=3D0, bus=3D0, slot=3D0, func=3D4=0A class=3D05-00-00, hdrtype=3D0x00, m=
fdev=3D0=0A cmdreg=3D0x0106, statreg=3D0x00a0, cachelnsz=3D0 (dwords)=0A la=
ttimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0Afound-> =
vendor=3D0x10de, dev=3D0x0076, revid=3D0xa1=0A domain=3D0, bus=3D0, slot=3D=
1, func=3D0=0A class=3D05-00-00, hdrtype=3D0x00, mfdev=3D1=0A cmdreg=3D0x00=
00, statreg=3D0x0020, cachelnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), min=
gnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0Afound-> vendor=3D0x10de, dev=3D0x=
0078, revid=3D0xa1=0A domain=3D0, bus=3D0, slot=3D1, func=3D1=0A class=3D05=
-00-00, hdrtype=3D0x00, mfdev=3D1=0A cmdreg=3D0x0000, statreg=3D0x0020, cac=
helnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=
=3D0x00 (0 ns)=0Afound-> vendor=3D0x10de, dev=3D0x0079, revid=3D0xa1=0A dom=
ain=3D0, bus=3D0, slot=3D1, func=3D2=0A class=3D05-00-00, hdrtype=3D0x00, m=
fdev=3D1=0A cmdreg=3D0x0000, statreg=3D0x0020, cachelnsz=3D0 (dwords)=0A la=
ttimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0Afound-> =
vendor=3D0x10de, dev=3D0x007a, revid=3D0xa1=0A domain=3D0, bus=3D0, slot=3D=
1, func=3D3=0A class=3D05-00-00, hdrtype=3D0x00, mfdev=3D1=0A cmdreg=3D0x00=
00, statreg=3D0x0020, cachelnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), min=
gnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0Afound-> vendor=3D0x10de, dev=3D0x=
007b, revid=3D0xa1=0A domain=3D0, bus=3D0, slot=3D1, func=3D4=0A class=3D05=
-00-00, hdrtype=3D0x00, mfdev=3D1=0A cmdreg=3D0x0000, statreg=3D0x0020, cac=
helnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=
=3D0x00 (0 ns)=0Afound-> vendor=3D0x10de, dev=3D0x007c, revid=3D0xa1=0A dom=
ain=3D0, bus=3D0, slot=3D1, func=3D5=0A class=3D05-00-00, hdrtype=3D0x00, m=
fdev=3D1=0A cmdreg=3D0x0000, statreg=3D0x0020, cachelnsz=3D0 (dwords)=0A la=
ttimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0Afound-> =
vendor=3D0x10de, dev=3D0x007d, revid=3D0xa1=0A domain=3D0, bus=3D0, slot=3D=
1, func=3D6=0A class=3D05-00-00, hdrtype=3D0x00, mfdev=3D1=0A cmdreg=3D0x00=
00, statreg=3D0x0020, cachelnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), min=
gnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0Afound-> vendor=3D0x10de, dev=3D0x=
007e, revid=3D0xa2=0A domain=3D0, bus=3D0, slot=3D2, func=3D0=0A class=3D06=
-04-00, hdrtype=3D0x01, mfdev=3D0=0A cmdreg=3D0x0107, statreg=3D0x0010, cac=
helnsz=3D16 (dwords)=0A lattimer=3D0x00 (0 ns), mingnt=3D0x0a (2500 ns), ma=
xlat=3D0x00 (0 ns)=0A powerspec 2 supports D0 D3 current D0=0A MSI suppor=
ts 2 messages, 64 bit=0Afound-> vendor=3D0x10de, dev=3D0x007e, revid=3D0xa2=
=0A domain=3D0, bus=3D0, slot=3D4, func=3D0=0A class=3D06-04-00, hdrtype=3D=
0x01, mfdev=3D0=0A cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D16 (dword=
s)=0A lattimer=3D0x00 (0 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x00 (0 ns)=
=0A powerspec 2 supports D0 D3 current D0=0A MSI supports 2 messages, 64 =
bit=0Afound-> vendor=3D0x10de, dev=3D0x007e, revid=3D0xa2=0A domain=3D0, bu=
s=3D0, slot=3D5, func=3D0=0A class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0=0A=
cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D16 (dwords)=0A lattimer=3D0=
x00 (0 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x00 (0 ns)=0A powerspec 2 su=
pports D0 D3 current D0=0A MSI supports 2 messages, 64 bit=0Afound-> vendo=
r=3D0x10de, dev=3D0x0369, revid=3D0xa1=0A domain=3D0, bus=3D0, slot=3D9, fu=
nc=3D0=0A class=3D05-00-00, hdrtype=3D0x00, mfdev=3D0=0A cmdreg=3D0x0106, s=
tatreg=3D0x00b0, cachelnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), mingnt=
=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0Afound-> vendor=3D0x10de, dev=3D0x036=
0, revid=3D0xa2=0A domain=3D0, bus=3D0, slot=3D10, func=3D0=0A class=3D06-0=
1-00, hdrtype=3D0x00, mfdev=3D1=0A cmdreg=3D0x000f, statreg=3D0x00a0, cache=
lnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=
=3D0x00 (0 ns)=0A map[18]: type I/O Port, range 32, base 0x4f00, size 8, e=
nabled=0Afound-> vendor=3D0x10de, dev=3D0x0368, revid=3D0xa2=0A domain=3D0,=
bus=3D0, slot=3D10, func=3D1=0A class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D=
1=0A cmdreg=3D0x0001, statreg=3D0x00b0, cachelnsz=3D0 (dwords)=0A lattimer=
=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A intpin=3Da, i=
rq=3D9=0A powerspec 2 supports D0 D3 current D0=0A map[10]: type I/O Port=
, range 32, base 0x4c00, size 6, enabled=0A map[20]: type I/O Port, range =
32, base 0x5000, size 6, enabled=0A map[24]: type I/O Port, range 32, base=
0x5100, size 6, enabled=0Apcib0: matched entry for 0.10.INTA (src \\_SB_.=
AP12:0)=0Apci_link25: Picked IRQ 20 with weight 0=0Apcib0: slot 10 INTA rou=
ted to irq 20 via \\_SB_.AP12=0Afound-> vendor=3D0x10de, dev=3D0x036c, revi=
d=3D0xa1=0A domain=3D0, bus=3D0, slot=3D11, func=3D0=0A class=3D0c-03-10, h=
drtype=3D0x00, mfdev=3D1=0A cmdreg=3D0x0007, statreg=3D0x00b0, cachelnsz=3D=
0 (dwords)=0A lattimer=3D0x00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x01=
(250 ns)=0A intpin=3Da, irq=3D10=0A powerspec 2 supports D0 D1 D2 D3 cur=
rent D0=0A map[10]: type Memory, range 32, base 0xdfffc000, size 12, enable=
d=0Apcib0: matched entry for 0.11.INTA (src \\_SB_.AP20:0)=0Apci_link30: Pi=
cked IRQ 21 with weight 0=0Apcib0: slot 11 INTA routed to irq 21 via \\_SB_=
AP20=0Afound-> vendor=3D0x10de, dev=3D0x036d, revid=3D0xa2=0A domain=3D0, =
bus=3D0, slot=3D11, func=3D1=0A class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D1=
=0A cmdreg=3D0x0006, statreg=3D0x00b0, cachelnsz=3D0 (dwords)=0A lattimer=
=3D0x00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x01 (250 ns)=0A intpin=3D=
b, irq=3D10=0A powerspec 2 supports D0 D1 D2 D3 current D0=0A map[10]: ty=
pe Memory, range 32, base 0xdfffbf00, size 8, enabled=0Apcib0: matched ent=
ry for 0.11.INTB (src \\_SB_.AP13:0)=0Apci_link26: Picked IRQ 22 with weigh=
t 0=0Apcib0: slot 11 INTB routed to irq 22 via \\_SB_.AP13=0Afound-> vendor=
=3D0x10de, dev=3D0x036e, revid=3D0xa1=0A domain=3D0, bus=3D0, slot=3D13, fu=
nc=3D0=0A class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0=0A cmdreg=3D0x0005, s=
tatreg=3D0x00b0, cachelnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), mingnt=
=3D0x03 (750 ns), maxlat=3D0x01 (250 ns)=0A powerspec 2 supports D0 D3 cu=
rrent D0=0A map[20]: type I/O Port, range 32, base 0xecf0, size 4, enabled=
=0Afound-> vendor=3D0x10de, dev=3D0x037f, revid=3D0xa2=0A domain=3D0, bus=
=3D0, slot=3D14, func=3D0=0A class=3D01-04-85, hdrtype=3D0x00, mfdev=3D1=0A=
cmdreg=3D0x0007, statreg=3D0x00b0, cachelnsz=3D0 (dwords)=0A lattimer=3D0x=
00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x01 (250 ns)=0A intpin=3Da, ir=
q=3D11=0A powerspec 2 supports D0 D3 current D0=0A MSI supports 4 message=
s, 64 bit=0A map[10]: type I/O Port, range 32, base 0xfe00, size 3, enable=
d=0A map[14]: type I/O Port, range 32, base 0xfe10, size 2, enabled=0A map=
[18]: type I/O Port, range 32, base 0xfe20, size 3, enabled=0A map[1c]: ty=
pe I/O Port, range 32, base 0xfe30, size 2, enabled=0A map[20]: type I/O P=
ort, range 32, base 0xfec0, size 4, enabled=0A map[24]: type Memory, range=
32, base 0xdfffd000, size 12, enabled=0Apcib0: matched entry for 0.14.INTA=
(src \\_SB_.AP17:0)=0Apci_link29: Picked IRQ 23 with weight 0=0Apcib0: slo=
t 14 INTA routed to irq 23 via \\_SB_.AP17=0Afound-> vendor=3D0x10de, dev=
=3D0x037f, revid=3D0xa3=0A domain=3D0, bus=3D0, slot=3D14, func=3D1=0A clas=
s=3D01-04-85, hdrtype=3D0x00, mfdev=3D1=0A cmdreg=3D0x0007, statreg=3D0x00b=
0, cachelnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), mingnt=3D0x03 (750 ns)=
, maxlat=3D0x01 (250 ns)=0A intpin=3Db, irq=3D11=0A powerspec 2 supports D=
0 D3 current D0=0A MSI supports 4 messages, 64 bit=0A map[10]: type I/O Po=
rt, range 32, base 0xfe40, size 3, enabled=0A map[14]: type I/O Port, rang=
e 32, base 0xfe50, size 2, enabled=0A map[18]: type I/O Port, range 32, ba=
se 0xfe60, size 3, enabled=0A map[1c]: type I/O Port, range 32, base 0xfe7=
0, size 2, enabled=0A map[20]: type I/O Port, range 32, base 0xfed0, size =
4, enabled=0A map[24]: type Memory, range 32, base 0xdfffe000, size 12, en=
abled=0Apcib0: matched entry for 0.14.INTB (src \\_SB_.AP16:0)=0Apci_link28=
: Picked IRQ 20 with weight 1=0Apcib0: slot 14 INTB routed to irq 20 via \\=
_SB_.AP16=0Afound-> vendor=3D0x10de, dev=3D0x037f, revid=3D0xa4=0A domain=
=3D0, bus=3D0, slot=3D14, func=3D2=0A class=3D01-04-85, hdrtype=3D0x00, mfd=
ev=3D1=0A cmdreg=3D0x0007, statreg=3D0x00b0, cachelnsz=3D0 (dwords)=0A latt=
imer=3D0x00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x01 (250 ns)=0A intpi=
n=3Dc, irq=3D11=0A powerspec 2 supports D0 D3 current D0=0A MSI supports =
4 messages, 64 bit=0A map[10]: type I/O Port, range 32, base 0xfe80, size =
3, enabled=0A map[14]: type I/O Port, range 32, base 0xfe90, size 2, enabl=
ed=0A map[18]: type I/O Port, range 32, base 0xfea0, size 3, enabled=0A ma=
p[1c]: type I/O Port, range 32, base 0xfeb0, size 2, enabled=0A map[20]: t=
ype I/O Port, range 32, base 0xfef0, size 4, enabled=0A map[24]: type Memo=
ry, range 32, base 0xdffff000, size 12, enabled=0Apcib0: matched entry for =
0.14.INTC (src \\_SB_.AP27:0)=0Apci_link33: Picked IRQ 21 with weight 1=0Ap=
cib0: slot 14 INTC routed to irq 21 via \\_SB_.AP27=0Afound-> vendor=3D0x10=
de, dev=3D0x0370, revid=3D0xa2=0A domain=3D0, bus=3D0, slot=3D15, func=3D0=
=0A class=3D06-04-01, hdrtype=3D0x01, mfdev=3D1=0A cmdreg=3D0x0107, statreg=
=3D0x00b0, cachelnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), mingnt=3D0x02 =
(500 ns), maxlat=3D0x00 (0 ns)=0Afound-> vendor=3D0x10de, dev=3D0x0376, rev=
id=3D0xa2=0A domain=3D0, bus=3D0, slot=3D19, func=3D0=0A class=3D06-04-00, =
hdrtype=3D0x01, mfdev=3D0=0A cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=
=3D16 (dwords)=0A lattimer=3D0x00 (0 ns), mingnt=3D0x02 (500 ns), maxlat=3D=
0x00 (0 ns)=0A powerspec 2 supports D0 D3 current D0=0A MSI supports 2 me=
ssages, 64 bit=0Afound-> vendor=3D0x10de, dev=3D0x0377, revid=3D0xa2=0A dom=
ain=3D0, bus=3D0, slot=3D24, func=3D0=0A class=3D06-04-00, hdrtype=3D0x01, =
mfdev=3D0=0A cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D16 (dwords)=0A =
lattimer=3D0x00 (0 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x00 (0 ns)=0A pow=
erspec 2 supports D0 D3 current D0=0A MSI supports 2 messages, 64 bit=0Ap=
ci0: <memory, RAM> at device 0.1 (no driver attached)=0Apci0: <memory, RAM>=
at device 0.2 (no driver attached)=0Apci0: <memory, RAM> at device 0.3 (no=
driver attached)=0Apci0: <memory, RAM> at device 0.4 (no driver attached)=
=0Apci0: <memory, RAM> at device 1.0 (no driver attached)=0Apci0: <memory, =
RAM> at device 1.1 (no driver attached)=0Apci0: <memory, RAM> at device 1.2=
(no driver attached)=0Apci0: <memory, RAM> at device 1.3 (no driver attach=
ed)=0Apci0: <memory, RAM> at device 1.4 (no driver attached)=0Apci0: <memor=
y, RAM> at device 1.5 (no driver attached)=0Apci0: <memory, RAM> at device =
1.6 (no driver attached)=0Apcib1: <ACPI PCI-PCI bridge> at device 2.0 on pc=
i0=0Apcib1: domain 0=0Apcib1: secondary bus 1=0Apcib1: =
subordinate bus 1=0Apcib1: I/O decode 0xd000-0xdfff=0Apcib1: =
memory decode 0xdb000000-0xdeffffff=0Apcib1: prefetched decode 0xa000=
0000-0xafffffff=0Apci1: <ACPI PCI bus> on pcib1=0Apci1: domain=3D0, physica=
l bus=3D1=0Afound-> vendor=3D0x10de, dev=3D0x0191, revid=3D0xa2=0A domain=
=3D0, bus=3D1, slot=3D0, func=3D0=0A class=3D03-00-00, hdrtype=3D0x00, mfde=
v=3D0=0A cmdreg=3D0x0003, statreg=3D0x0010, cachelnsz=3D16 (dwords)=0A latt=
imer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A intpin=3D=
a, irq=3D11=0A powerspec 2 supports D0 D3 current D0=0A MSI supports 1 me=
ssage, 64 bit=0A map[10]: type Memory, range 32, base 0xde000000, size 24, =
enabled=0Apcib1: requested memory range 0xde000000-0xdeffffff: good=0A map[=
14]: type Prefetchable Memory, range 64, base 0xa0000000, size 28, enabled=
=0Apcib1: requested memory range 0xa0000000-0xafffffff: good=0A map[1c]: ty=
pe Memory, range 64, base 0xdc000000, size 25, enabled=0Apcib1: requested m=
emory range 0xdc000000-0xddffffff: good=0A map[24]: type I/O Port, range 32=
, base 0xdc80, size 7, enabled=0Apcib1: requested I/O range 0xdc80-0xdcff:=
in range=0Apcib1: matched entry for 1.0.INTA (src \\_SB_.AP04:0)=0Apci_lin=
k21: Picked IRQ 16 with weight 0=0Apcib1: slot 0 INTA routed to irq 16 via =
\\_SB_.AP04=0Avgapci0: <VGA-compatible display> port 0xdc80-0xdcff mem 0xde=
000000-0xdeffffff,0xa0000000-0xafffffff,0xdc000000-0xddffffff irq 16 at dev=
ice 0.0 on pci1=0Apcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0=0Apcib=
2: domain 0=0Apcib2: secondary bus 2=0Apcib2: subordin=
ate bus 2=0Apcib2: I/O decode 0xf000-0xfff=0Apcib2: no prefetc=
hed decode=0Apci2: <ACPI PCI bus> on pcib2=0Apci2: domain=3D0, physical bus=
=3D2=0Apcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0=0Apcib3: domain=
0=0Apcib3: secondary bus 3=0Apcib3: subordinate bus 3=
=0Apcib3: I/O decode 0xf000-0xfff=0Apcib3: no prefetched decode=
=0Apci3: <ACPI PCI bus> on pcib3=0Apci3: domain=3D0, physical bus=3D3=0Apci=
0: <memory, RAM> at device 9.0 (no driver attached)=0Aisab0: <PCI-ISA bridg=
e> port 0x4f00-0x4fff at device 10.0 on pci0=0Aisa0: <ISA bus> on isab0=0Ap=
ci0: <serial bus, SMBus> at device 10.1 (no driver attached)=0Aohci0: <OHCI=
(generic) USB controller> mem 0xdfffc000-0xdfffcfff irq 21 at device 11.0 =
on pci0=0Aohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdfffc000=0A=
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 49=0Aohci0: [GIANT-LOCKED=
]=0Aohci0: [ITHREAD]=0Ausb0: OHCI version 1.0, legacy support=0Ausb0: SMM d=
oes not respond, resetting=0Ausb0: <OHCI (generic) USB controller> on ohci0=
=0Ausb0: USB revision 1.0=0Auhub0: <nVidia OHCI root hub, class 9/0, rev 1.=
00/1.00, addr 1> on usb0=0Auhub0: 10 ports with 10 removable, self powered=
=0Aehci0: <EHCI (generic) USB 2.0 controller> mem 0xdfffbf00-0xdfffbfff irq=
22 at device 11.1 on pci0=0Aehci0: Reserved 0x100 bytes for rid 0x10 type =
3 at 0xdfffbf00=0Aioapic0: routing intpin 22 (PCI IRQ 22) to vector 50=0Aeh=
ci0: [GIANT-LOCKED]=0Aehci0: [ITHREAD]=0Ausb1: waiting for BIOS to give up =
control=0Ausb1: EHCI version 1.0=0Ausb1: companion controller, 10 ports eac=
h: usb0=0Ausb1: <EHCI (generic) USB 2.0 controller> on ehci0=0Ausb1: USB re=
vision 2.0=0Auhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1=
> on usb1=0Auhub1: 10 ports with 10 removable, self powered=0Aumass0: <Seag=
ate FreeAgentDesktop, class 0/0, rev 2.00/0.00, addr 2> on uhub1=0Aumass0:0=
:0:-1: Attached to scbus0=0Augen0: <MARVELL v1021, class 0/0, rev 2.00/0.01=
, addr 3> on uhub1=0Aumass1: <TEAC CA-200, class 0/0, rev 2.00/4.00, addr 4=
> on uhub1=0Aumass1:1:1:-1: Attached to scbus1=0Aatapci0: <nVidia nForce MC=
P55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xecf0-0xe=
cff at device 13.0 on pci0=0Aatapci0: Reserved 0x10 bytes for rid 0x20 type=
4 at 0xecf0=0Aata0: <ATA channel 0> on atapci0=0Aatapci0: Reserved 0x8 byt=
es for rid 0x10 type 4 at 0x1f0=0Aatapci0: Reserved 0x1 bytes for rid 0x14 =
type 4 at 0x3f6=0Aata0: reset tp1 mask=3D03 ostat0=3D60 ostat1=3D70=0Aata0:=
stat0=3D0x20 err=3D0x20 lsb=3D0x20 msb=3D0x20=0Aata0: stat1=3D0x30 err=3D0=
x30 lsb=3D0x30 msb=3D0x30=0Aata0: reset tp2 stat0=3D20 stat1=3D30 devices=
=3D0x0=0Aioapic0: routing intpin 14 (ISA IRQ 14) to vector 51=0Aata0: [MPSA=
FE]=0Aata0: [ITHREAD]=0Aata1: <ATA channel 1> on atapci0=0Aatapci0: Reserve=
d 0x8 bytes for rid 0x18 type 4 at 0x170=0Aatapci0: Reserved 0x1 bytes for =
rid 0x1c type 4 at 0x376=0Aata1: reset tp1 mask=3D00 ostat0=3Dff ostat1=3Df=
f=0Aioapic0: routing intpin 15 (ISA IRQ 15) to vector 52=0Aata1: [MPSAFE]=
=0Aata1: [ITHREAD]=0Aatapci1: <nVidia nForce MCP55 SATA300 controller> port=
0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfecf mem =
0xdfffd000-0xdfffdfff irq 23 at device 14.0 on pci0=0Aatapci1: Reserved 0x1=
0 bytes for rid 0x20 type 4 at 0xfec0=0Aioapic0: routing intpin 23 (PCI IRQ=
23) to vector 53=0Aatapci1: [MPSAFE]=0Aatapci1: [ITHREAD]=0Aatapci1: Reser=
ved 0x1000 bytes for rid 0x24 type 3 at 0xdfffd000=0Aata2: <ATA channel 0> =
on atapci1=0Aatapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xfe00=0Aat=
apci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xfe10=0Aata2: SATA connec=
t time=3D0ms=0Aata2: reset tp1 mask=3D01 ostat0=3D50 ostat1=3D00=0Aata2: st=
at0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00=0Aata2: reset tp2 stat0=3D50 st=
at1=3D00 devices=3D0x1<ATA_MASTER>=0Aata2: [MPSAFE]=0Aata2: [ITHREAD]=0Aata=
3: <ATA channel 1> on atapci1=0Aatapci1: Reserved 0x8 bytes for rid 0x18 ty=
pe 4 at 0xfe20=0Aatapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xfe30=
=0Aata3: SATA connect time=3D0ms=0Aata3: reset tp1 mask=3D01 ostat0=3D50 os=
tat1=3D00=0Aata3: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00=0Aata3: res=
et tp2 stat0=3D50 stat1=3D00 devices=3D0x1<ATA_MASTER>=0Aata3: [MPSAFE]=0Aa=
ta3: [ITHREAD]=0Aatapci2: <nVidia nForce MCP55 SATA300 controller> port 0xf=
e40-0xfe47,0xfe50-0xfe53,0xfe60-0xfe67,0xfe70-0xfe73,0xfed0-0xfedf mem 0xdf=
ffe000-0xdfffefff irq 20 at device 14.1 on pci0=0Aatapci2: Reserved 0x10 by=
tes for rid 0x20 type 4 at 0xfed0=0Aioapic0: routing intpin 20 (PCI IRQ 20)=
to vector 54=0Aatapci2: [MPSAFE]=0Aatapci2: [ITHREAD]=0Aatapci2: Reserved =
0x1000 bytes for rid 0x24 type 3 at 0xdfffe000=0Aata4: <ATA channel 0> on a=
tapci2=0Aatapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xfe40=0Aatapci=
2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xfe50=0Aata4: SATA connect ti=
me=3D0ms=0Aata4: reset tp1 mask=3D01 ostat0=3D50 ostat1=3D00=0Aata4: stat0=
=3D0x10 err=3D0x01 lsb=3D0x14 msb=3D0xeb=0Aata4: reset tp2 stat0=3D10 stat1=
=3D00 devices=3D0x4<ATAPI_MASTER>=0Aata4: [MPSAFE]=0Aata4: [ITHREAD]=0Aata5=
: <ATA channel 1> on atapci2=0Aatapci2: Reserved 0x8 bytes for rid 0x18 typ=
e 4 at 0xfe60=0Aatapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xfe70=
=0Aata5: SATA connect time=3D0ms=0Aata5: reset tp1 mask=3D01 ostat0=3D50 os=
tat1=3D00=0Aata5: stat0=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb=0Aata5: res=
et tp2 stat0=3D00 stat1=3D00 devices=3D0x4<ATAPI_MASTER>=0Aata5: [MPSAFE]=
=0Aata5: [ITHREAD]=0Aatapci3: <nVidia nForce MCP55 SATA300 controller> port=
0xfe80-0xfe87,0xfe90-0xfe93,0xfea0-0xfea7,0xfeb0-0xfeb3,0xfef0-0xfeff mem =
0xdffff000-0xdfffffff irq 21 at device 14.2 on pci0=0Aatapci3: Reserved 0x1=
0 bytes for rid 0x20 type 4 at 0xfef0=0Aatapci3: [MPSAFE]=0Aatapci3: [ITHRE=
AD]=0Aatapci3: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xdffff000=0Aat=
a6: <ATA channel 0> on atapci3=0Aatapci3: Reserved 0x8 bytes for rid 0x10 t=
ype 4 at 0xfe80=0Aatapci3: Reserved 0x4 bytes for rid 0x14 type 4 at 0xfe90=
=0Aata6: SATA connect time=3D0ms=0Aata6: reset tp1 mask=3D01 ostat0=3D50 os=
tat1=3D00=0Aata6: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00=0Aata6: res=
et tp2 stat0=3D50 stat1=3D00 devices=3D0x1<ATA_MASTER>=0Aata6: [MPSAFE]=0Aa=
ta6: [ITHREAD]=0Aata7: <ATA channel 1> on atapci3=0Aatapci3: Reserved 0x8 b=
ytes for rid 0x18 type 4 at 0xfea0=0Aatapci3: Reserved 0x4 bytes for rid 0x=
1c type 4 at 0xfeb0=0Aata7: SATA connect time=3D0ms=0Aata7: reset tp1 mask=
=3D01 ostat0=3D50 ostat1=3D00=0Aata7: stat0=3D0x50 err=3D0x01 lsb=3D0x00 ms=
b=3D0x00=0Aata7: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1<ATA_MASTER>=
=0Aata7: [MPSAFE]=0Aata7: [ITHREAD]=0Apcib4: <ACPI PCI-PCI bridge> at devic=
e 15.0 on pci0=0Apcib4: domain 0=0Apcib4: secondary bus =
4=0Apcib4: subordinate bus 4=0Apcib4: I/O decode 0xc000-0xcfff=
=0Apcib4: memory decode 0xd4000000-0xdaffffff=0Apcib4: prefetched d=
ecode 0xb0000000-0xb0ffffff=0Apcib4: Subtractively decoded bridge.=0Apci4=
: <ACPI PCI bus> on pcib4=0Apci4: domain=3D0, physical bus=3D4=0Afound-> ve=
ndor=3D0x1971, dev=3D0x1011, revid=3D0x00=0A domain=3D0, bus=3D4, slot=3D4,=
func=3D0=0A class=3Dff-00-00, hdrtype=3D0x00, mfdev=3D0=0A cmdreg=3D0x0117=
, statreg=3D0x0288, cachelnsz=3D16 (dwords)=0A lattimer=3D0x40 (1920 ns), m=
ingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A intpin=3Da, irq=3D11=0A map[10=
]: type Prefetchable Memory, range 64, base 0xb0000000, size 24, enabled=0A=
pcib4: requested memory range 0xb0000000-0xb0ffffff: good=0A map[18]: type =
I/O Port, range 32, base 0xcc00, size 8, enabled=0Apcib4: requested I/O ra=
nge 0xcc00-0xccff: in range=0Apcib4: matched entry for 4.4.INTA (src \\_SB_=
AP00:0)=0Apci_link17: Picked IRQ 16 with weight 3=0Apcib4: slot 4 INTA rou=
ted to irq 16 via \\_SB_.AP00=0Afound-> vendor=3D0x1102, dev=3D0x0005, revi=
d=3D0x00=0A domain=3D0, bus=3D4, slot=3D5, func=3D0=0A class=3D04-01-00, hd=
rtype=3D0x00, mfdev=3D0=0A cmdreg=3D0x0107, statreg=3D0x0210, cachelnsz=3D1=
6 (dwords)=0A lattimer=3D0x40 (1920 ns), mingnt=3D0x04 (1000 ns), maxlat=3D=
0x05 (1250 ns)=0A intpin=3Da, irq=3D10=0A powerspec 2 supports D0 D1 D2 D3=
current D0=0A MSI supports 1 message, 64 bit=0A map[10]: type I/O Port, r=
ange 32, base 0xc8e0, size 5, enabled=0Apcib4: requested I/O range 0xc8e0-=
0xc8ff: in range=0A map[14]: type Memory, range 64, base 0xdae00000, size 2=
1, enabled=0Apcib4: requested memory range 0xdae00000-0xdaffffff: good=0A m=
ap[1c]: type Memory, range 64, base 0xd4000000, size 26, enabled=0Apcib4: r=
equested memory range 0xd4000000-0xd7ffffff: good=0Apcib4: matched entry fo=
r 4.5.INTA (src \\_SB_.AP01:0)=0Apci_link18: Picked IRQ 17 with weight 0=0A=
pcib4: slot 5 INTA routed to irq 17 via \\_SB_.AP01=0Afound-> vendor=3D0x10=
4c, dev=3D0x8023, revid=3D0x00=0A domain=3D0, bus=3D4, slot=3D10, func=3D0=
=0A class=3D0c-00-10, hdrtype=3D0x00, mfdev=3D0=0A cmdreg=3D0x0116, statreg=
=3D0x0210, cachelnsz=3D16 (dwords)=0A lattimer=3D0x40 (1920 ns), mingnt=3D0=
x02 (500 ns), maxlat=3D0x04 (1000 ns)=0A intpin=3Da, irq=3D9=0A powerspec 2=
supports D0 D1 D2 D3 current D0=0A map[10]: type Memory, range 32, base =
0xdadfb800, size 11, enabled=0Apcib4: requested memory range 0xdadfb800-0xd=
adfbfff: good=0A map[14]: type Memory, range 32, base 0xdadfc000, size 14, =
enabled=0Apcib4: requested memory range 0xdadfc000-0xdadfffff: good=0Apcib4=
: matched entry for 4.10.INTA (src \\_SB_.AP02:0)=0Apci_link19: Picked IRQ =
18 with weight 0=0Apcib4: slot 10 INTA routed to irq 18 via \\_SB_.AP02=0Ap=
ci4: <unknown> at device 4.0 (no driver attached)=0Apci4: <multimedia, audi=
o> at device 5.0 (no driver attached)=0Afwohci0: <Texas Instruments TSB43AB=
22/A> mem 0xdadfb800-0xdadfbfff,0xdadfc000-0xdadfffff irq 18 at device 10.0=
on pci4=0Afwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xdadfb800=
=0Aioapic0: routing intpin 18 (PCI IRQ 18) to vector 55=0Afwohci0: [MPSAFE]=
=0Afwohci0: [FILTER]=0Afwohci0: OHCI version 1.10 (ROM=3D0)=0Afwohci0: No. =
of Isochronous channels is 4.=0Afwohci0: EUI64 80:00:00:00:00:00:00:00=0Afw=
ohci0: Phy 1394a available S400, 2 ports.=0Afwohci0: Link S400, max_rec 204=
8 bytes.=0Afirewire0: <IEEE1394(FireWire) bus> on fwohci0=0Afwe0: <Ethernet=
over FireWire> on firewire0=0Aif_fwe0: Fake Ethernet address: 82:00:00:00:=
00:00=0Afwe0: bpf attached=0Afwe0: Ethernet address: 82:00:00:00:00:00=0Afw=
ip0: <IP over FireWire> on firewire0=0Afwip0: bpf attached=0Afwip0: Firewir=
e address: 80:00:00:00:00:00:00:00 @ 0xfffe00000000, S400, maxrec 2048=0Asb=
p0: <SBP-2/SCSI over FireWire> on firewire0=0Adcons_crom0: <dcons configura=
tion ROM> on firewire0=0Adcons_crom0: bus_addr 0x228c000=0Afwohci0: Initiat=
e bus reset=0Afwohci0: BUS reset=0Afwohci0: node_id=3D0xc800ffc0, gen=3D1, =
CYCLEMASTER mode=0Apcib5: <ACPI PCI-PCI bridge> at device 19.0 on pci0=0Apc=
ib5: domain 0=0Apcib5: secondary bus 5=0Apcib5: subord=
inate bus 5=0Apcib5: I/O decode 0xf000-0xfff=0Apcib5: no prefe=
tched decode=0Apci5: <ACPI PCI bus> on pcib5=0Apci5: domain=3D0, physical b=
us=3D5=0Apcib6: <ACPI PCI-PCI bridge> at device 24.0 on pci0=0Apcib6: dom=
ain 0=0Apcib6: secondary bus 6=0Apcib6: subordinate bus =
6=0Apcib6: I/O decode 0xb000-0xbfff=0Apcib6: memory decode =
0xd0000000-0xd3ffffff=0Apcib6: prefetched decode 0xb1000000-0xcfffffff=
=0Apci6: <ACPI PCI bus> on pcib6=0Apci6: domain=3D0, physical bus=3D6=0Afou=
nd-> vendor=3D0x10de, dev=3D0x0191, revid=3D0xa2=0A domain=3D0, bus=3D6, sl=
ot=3D0, func=3D0=0A class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0=0A cmdreg=
=3D0x0000, statreg=3D0x0010, cachelnsz=3D16 (dwords)=0A lattimer=3D0x00 (0 =
ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A intpin=3Da, irq=3D11=0A =
powerspec 2 supports D0 D3 current D0=0A MSI supports 1 message, 64 bit=
=0A map[10]: type Memory, range 32, base 0xd1000000, size 24, memory disabl=
ed=0Apcib6: requested memory range 0xd1000000-0xd1ffffff: good=0A map[14]: =
type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled=0Apci=
b6: requested memory range 0xc0000000-0xcfffffff: good=0A map[1c]: type Mem=
ory, range 64, base 0xd2000000, size 25, enabled=0Apcib6: requested memory =
range 0xd2000000-0xd3ffffff: good=0A map[24]: type I/O Port, range 32, base=
0xbc80, size 7, port disabled=0Apcib6: requested I/O range 0xbc80-0xbcff:=
in range=0Apcib6: matched entry for 6.0.INTA (src \\_SB_.AP04:0)=0Apcib6: =
slot 0 INTA routed to irq 16 via \\_SB_.AP04=0Avgapci1: <VGA-compatible dis=
play> port 0xbc80-0xbcff mem 0xd1000000-0xd1ffffff,0xc0000000-0xcfffffff,0x=
d2000000-0xd3ffffff irq 16 at device 0.0 on pci6=0Aacpi_hpet0: <High Precis=
ion Event Timer> iomem 0xfed00000-0xfed003ff on acpi0=0Aacpi_hpet0: vend: 0=
x10de rev: 0x1 num: 2 hz: 25000000 opts: legacy_route=0ATimecounter "HPET" =
frequency 25000000 Hz quality 900=0Acpu0: <ACPI CPU> on acpi0=0Acpu0: switc=
hing to generic Cx mode=0Aest0: enabling SpeedStep=0Aest0: <Enhanced SpeedS=
tep Frequency Control> on cpu0=0Aest: CPU supports Enhanced Speedstep, but =
is not recognized.=0Aest: cpu_vendor GenuineIntel, msr c380c3886000c38=0Ade=
vice_attach: est0 attach returned 6=0Ap4tcc0: <CPU Frequency Thermal Contro=
l> on cpu0=0Acpu1: <ACPI CPU> on acpi0=0Aest1: <Enhanced SpeedStep Frequenc=
y Control> on cpu1=0Aest: CPU supports Enhanced Speedstep, but is not recog=
nized.=0Aest: cpu_vendor GenuineIntel, msr c380c3886000c38=0Adevice_attach:=
est1 attach returned 6=0Ap4tcc1: <CPU Frequency Thermal Control> on cpu1=
=0Acpu2: <ACPI CPU> on acpi0=0Aest2: <Enhanced SpeedStep Frequency Control>=
on cpu2=0Aest: CPU supports Enhanced Speedstep, but is not recognized.=0Ae=
st: cpu_vendor GenuineIntel, msr c380c3886000c38=0Adevice_attach: est2 atta=
ch returned 6=0Ap4tcc2: <CPU Frequency Thermal Control> on cpu2=0Acpu3: <AC=
PI CPU> on acpi0=0Aest3: <Enhanced SpeedStep Frequency Control> on cpu3=0Ae=
st: CPU supports Enhanced Speedstep, but is not recognized.=0Aest: cpu_vend=
or GenuineIntel, msr c380c3886000c38=0Adevice_attach: est3 attach returned =
6=0Ap4tcc3: <CPU Frequency Thermal Control> on cpu3=0Aacpi_button0: <Power =
Button> on acpi0=0Aatrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi=
0=0Aatrtc0: registered as a time-of-day clock (resolution 1000000us)=0Aatkb=
dc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0=0Aatkbd0: =
<AT Keyboard> irq 1 on atkbdc0=0Aatkbd: the current kbd controller command =
byte 0065=0Aatkbd: keyboard ID 0x41ab (2)=0Akbd0 at atkbd0=0Akbd0: atkbd0, =
AT 101/102 (2), config:0x0, flags:0x3d0000=0Aioapic0: routing intpin 1 (ISA=
IRQ 1) to vector 56=0Aatkbd0: [GIANT-LOCKED]=0Aatkbd0: [ITHREAD]=0Apsm0: u=
nable to allocate IRQ=0Apsmcpnp0: <PS/2 mouse port> irq 12 on acpi0=0Apsm0:=
current command byte:0065=0Apsm0: <PS/2 Mouse> irq 12 on atkbdc0=0Aioapic0=
: routing intpin 12 (ISA IRQ 12) to vector 57=0Apsm0: [GIANT-LOCKED]=0Apsm0=
: [ITHREAD]=0Apsm0: model MouseMan+, device ID 0-83, 3 buttons=0Apsm0: conf=
ig:00000000, flags:00000008, packet size:3=0Apsm0: syncmask:08, syncbits:00=
=0Asio0: irq maps: 0xc01 0xc11 0xc01 0xc01=0Asio0: irq maps: 0xc01 0xc11 0x=
c01 0xc01=0Asio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags=
0x10 on acpi0=0Asio0: type 16550A=0Aioapic0: routing intpin 4 (ISA IRQ 4) =
to vector 58=0Asio0: [FILTER]=0Aex_isa_identify()=0Aatkbdc: atkbdc0 already=
exists; skipping it=0Asio: sio0 already exists; skipping it=0Aahc_isa_prob=
e 4: ioport 0x4c00 alloc failed=0Aahc_isa_probe 5: ioport 0x5c00 alloc fail=
ed=0Aahc_isa_probe 11: ioport 0xbc00 alloc failed=0Aahc_isa_probe 12: iopor=
t 0xcc00 alloc failed=0Aahc_isa_probe 13: ioport 0xdc00 alloc failed=0Aahc_=
isa_probe 14: ioport 0xec00 alloc failed=0Asc: sc0 already exists; skipping=
it=0Avga: vga0 already exists; skipping it=0Aisa_probe_children: disabling=
PnP devices=0Aisa_probe_children: probing non-PnP devices=0Aorm0: <ISA Opt=
ion ROMs> at iomem 0xc0000-0xcc7ff,0xcc800-0xce7ff,0xce800-0xcffff on isa0=
=0Afdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0Appc=
0: cannot reserve I/O port range=0Appc0: <Parallel port> failed to probe at=
irq 7 on isa0=0Asc0: <System console> at flags 0x100 on isa0=0Asc0: VGA <1=
6 virtual consoles, flags=3D0x300>=0Asc0: fb0, kbd1, terminal emulator: sc =
(syscons terminal)=0Asio1: configured irq 3 not in bitmap of probed irqs 0=
=0Asio1: port may not be enabled=0Asio1: irq maps: 0xc01 0xc01 0xc01 0xc01=
=0Asio1: probe failed test(s): 0 1 2 4 6 7 9=0Asio1 failed to probe at port=
0x2f8-0x2ff irq 3 on isa0=0Asio2: not probed (disabled)=0Asio3: not probed=
(disabled)=0Avga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xb=
ffff on isa0=0Aisa_probe_children: probing PnP devices=0ADevice configurati=
on finished.=0AReducing kern.maxvnodes 257157 -> 100000=0Aprocfs registered=
=0AWARNING: ZFS is considered to be an experimental feature in FreeBSD.=0Al=
apic: Divisor 2, Frequency 133002215 hz=0ATimecounter "TSC" frequency 31920=
53112 Hz quality -100=0ATimecounters tick every 1.000 msec=0Alo0: bpf attac=
hed=0Ahptrr: no controller detected.firewire0: 1 nodes, maxhop <=3D 0, cabl=
e IRM =3D 0 (me)=0Afirewire0: bus manager 0 (me)=0A=0AZFS filesystem versio=
n 6=0AZFS storage pool version 6=0Aata2-master: pio=3DPIO4 wdma=3DWDMA2 udm=
a=3DUDMA133 cable=3D40 wire=0Aad4: 305245MB <Hitachi HDP725032GLA360 GM3OA5=
2A> at ata2-master SATA300=0Aad4: 625142448 sectors [620181C/16H/63S] 16 se=
ctors/interrupt 1 depth queue=0AGEOM: new disk ad4=0Aad4: nVidia check1 fai=
led=0Aad4: Adaptec check1 failed=0Aad4: LSI (v3) check1 failed=0Aad4: LSI (=
v2) check1 failed=0Aad4: FreeBSD check1 failed=0Aata3-master: pio=3DPIO4 wd=
ma=3DWDMA2 udma=3DUDMA133 cable=3D40 wire=0Aad6: 305245MB <Hitachi HDP72503=
2GLA360 GM3OA52A> at ata3-master SATA300=0Aad6: 625142448 sectors [620181C/=
16H/63S] 16 sectors/interrupt 1 depth queue=0Aad6: nVidia check1 failed=0Aa=
d6: Adaptec check1 failed=0Aad6: LSI (v3) check1 failed=0Aad6: LSI (v2) che=
ck1 failed=0Aad6: FreeBSD check1 failed=0Aata4-master: pio=3DPIO4 wdma=3DWD=
MA2 udma=3DUDMA33 cable=3D40 wire=0Aacd0: <TSSTcorp CD-RW/DVD-ROM TS-H493A/=
D200> CDRW drive at ata4 as master=0Aacd0: read 1377KB/s (8268KB/s) write 8=
268KB/s (8268KB/s), 1536KB buffer, SATA150=0Aacd0: Reads: CDR, CDRW, CDDA s=
tream, DVDROM, DVDR, packet=0Aacd0: Writes: CDR, CDRW, test write, burnproo=
f=0Aacd0: Audio: play, 256 volume levels=0Aacd0: Mechanism: ejectable tray,=
unlocked=0Aacd0: Medium: no/blank disc=0Aata5-master: pio=3DPIO4 wdma=3DWD=
MA2 udma=3DUDMA33 cable=3D40 wire=0AGEOM_LABEL: Label for provider ad4s2 is=
ntfs/System.=0AGEOM: new disk ad6=0Aacd1: <TSSTcorp DVD+/-RW TS-H653A/D500=
> DVDR drive at ata5 as master=0Aacd1: read 8269KB/s (8269KB/s) write 8269K=
B/s (8269KB/s), 2048KB buffer, SATA150=0Aacd1: Reads: CDR, CDRW, CDDA strea=
m, DVDROM, DVDR, packet=0Aacd1: Writes: CDR, CDRW, DVDR, test write, burnpr=
oof=0Aacd1: Audio: play, 256 volume levels=0Aacd1: Mechanism: ejectable tra=
y, unlocked=0Aacd1: Medium: CD-ROM unknown=0Aata6-master: pio=3DPIO4 wdma=
=3DWDMA2 udma=3DUDMA133 cable=3D40 wire=0Aad12: 305245MB <Hitachi HDT725032=
VLA360 V54OA7EA> at ata6-master SATA300=0Aad12: 625142448 sectors [620181C/=
16H/63S] 16 sectors/interrupt 1 depth queue=0Aad12: nVidia check1 failed=0A=
ad12: Adaptec check1 failed=0Aad12: LSI (v3) check1 failed=0Aad12: LSI (v2)=
check1 failed=0Aad12: FreeBSD check1 failed=0Aata7-master: pio=3DPIO4 wdma=
=3DWDMA2 udma=3DUDMA133 cable=3D40 wire=0Aad14: 305245MB <Hitachi HDT725032=
VLA360 V54OA7EA> at ata7-master SATA300=0Aad14: 625142448 sectors [620181C/=
16H/63S] 16 sectors/interrupt 1 depth queue=0AGEOM: new disk ad12=0Aad14: n=
Vidia check1 failed=0Aad14: Adaptec check1 failed=0Aad14: LSI (v3) check1 f=
ailed=0Aad14: LSI (v2) check1 failed=0Aad14: FreeBSD check1 failed=0AGEOM: =
new disk ad14=0AGEOM_MIRROR: Device mirror/root launched (4/4).=0AWARNING: =
Expected rawoffset 0, found 63=0A(probe8:sbp0:0:6:0): error 22=0A(probe8:sb=
p0:0:6:0): Unretryable Error=0A(probe2:sbp0:0:0:0): error 22=0A(probe2:sbp0=
:0:0:0): Unretryable Error=0A(probe3:sbp0:0:1:0): error 22=0A(probe3:sbp0:0=
:1:0): Unretryable Error=0A(probe4:sbp0:0:2:0): error 22=0A(probe4:sbp0:0:2=
:0): Unretryable Error=0A(probe5:sbp0:0:3:0): error 22=0A(probe5:sbp0:0:3:0=
): Unretryable Error=0A(probe6:sbp0:0:4:0): error 22=0A(probe6:sbp0:0:4:0):=
Unretryable Error=0A(probe7:sbp0:0:5:0): error 22=0A(probe7:sbp0:0:5:0): U=
nretryable Error=0Apass0 at umass-sim0 bus 0 target 0 lun 0=0Apass0: <Seaga=
te FreeAgentDesktop 100D> Fixed Direct Access SCSI-4 device=20=0Apass0: Ser=
ial Number 5QG1400G=0Apass0: 40.000MB/s transfers=0Apass1 at um=
ass-sim1 bus 1 target 0 lun 0=0Apass1: <TEAC USB HS-CF Card 4.00> Removab=
le Direct Access SCSI-0 device=20=0Apass1: 40.000MB/s transfers=0Apass2 at =
umass-sim1 bus 1 target 0 lun 1=0Apass2: <TEAC USB HS-xD/SM 4.00> Removab=
le Direct Access SCSI-0 device=20=0Apass2: 40.000MB/s transfers=0Apass3 at =
umass-sim1 bus 1 target 0 lun 2=0Apass3: <TEAC USB HS-MS Card 4.00> Remov=
able Direct Access SCSI-0 device=20=0Apass3: 40.000MB/s transfers=0Apass4 a=
t umass-sim1 bus 1 target 0 lun 3=0Apass4: <TEAC USB HS-SD Card 4.00> Rem=
ovable Direct Access SCSI-0 device=20=0Apass4: 40.000MB/s transfers=0AGEOM:=
new disk da0=0AGEOM: new disk da1=0AGEOM: new disk da2da0 at umass-sim0 bu=
s 0 target 0 lun 0=0Ada0: <Seagate FreeAgentDesktop 100D> Fixed Direct Acce=
ss SCSI-4 device=20=0Ada0: Serial Number 5QG1400G=0Ada0: 40.000=
MB/s transfers=0Ada0: 476940MB (976773168 512 byte sectors: 255H 63S/T 6080=
1C)=0A=0AGEOM: new disk da3=0AATA PseudoRAID loaded=0Alapic1: Forcing LINT1=
to edge trigger=0ASMP: AP CPU #1 Launched!=0Acpu1 AP:=0A ID: 0x0100000=
0 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff=0A lint0: 0x00010700 l=
int1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff=0A timer: 0x000200ef ther=
m: 0x00010000 err: 0x00010000 pcm: 0x00010000=0Alapic3: Forcing LINT1 to ed=
ge trigger=0ASMP: AP CPU #3 Launched!=0Acpu3 AP:=0A ID: 0x03000000 VE=
R: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff=0A lint0: 0x00010700 lint1: =
0x00008400 TPR: 0x00000000 SVR: 0x000001ff=0A timer: 0x000200ef therm: 0x0=
0010000 err: 0x00010000 pcm: 0x00010000=0Alapic2: Forcing LINT1 to edge tri=
gger=0ASMP: AP CPU #2 Launched!=0Acpu2 AP:=0A ID: 0x02000000 VER: 0x0=
0050014 LDR: 0x00000000 DFR: 0xffffffff=0A lint0: 0x00010700 lint1: 0x0000=
8400 TPR: 0x00000000 SVR: 0x000001ff=0A timer: 0x000200ef therm: 0x0001000=
0 err: 0x00010000 pcm: 0x00010000=0Aioapic0: Assigning ISA IRQ 1 to local A=
PIC 0=0Aioapic0: Assigning ISA IRQ 4 to local APIC 1=0Aioapic0: Assigning I=
SA IRQ 9 to local APIC 2=0Aioapic0: Assigning ISA IRQ 12 to local APIC 3=0A=
ioapic0: Assigning ISA IRQ 14 to local APIC 0=0Aioapic0: Assigning ISA IRQ =
15 to local APIC 1=0Aioapic0: Assigning PCI IRQ 18 to local APIC 2=0Aioapic=
0: Assigning PCI IRQ 20 to local APIC 3=0Aioapic0: Assigning PCI IRQ 21 to =
local APIC 0=0Aioapic0: Assigning PCI IRQ 22 to local APIC 1=0Aioapic0: Ass=
igning PCI IRQ 23 to local APIC 2=0AWARNING: WITNESS option enabled, expect=
reduced performance.=0A(da1:umass-sim1:1:0:0): error 6=0A(da1:umass-sim1:1=
:0:0): Unretryable Error=0Ada1 at umass-sim1 bus 1 target 0 lun 0=0Ada1: <T=
EAC USB HS-CF Card 4.00> Removable Direct Access SCSI-0 device=20=0Ada1: =
40.000MB/s transfers=0Ada1: Attempt to query device size failed: NOT READY,=
Medium not present=0A(da2:umass-sim1:1:0:1): error 6=0A(da2:umass-sim1:1:0=
:1): Unretryable Error=0Ada2 at umass-sim1 bus 1 target 0 lun 1=0Ada2: <TEA=
C USB HS-xD/SM 4.00> Removable Direct Access SCSI-0 device=20=0Ada2: 40.0=
00MB/s transfers=0Ada2: Attempt to query device size failed: NOT READY, Med=
ium not present=0A(da3:umass-sim1:1:0:2): error 6=0A(da3:umass-sim1:1:0:2):=
Unretryable Error=0Ada3 at umass-sim1 bus 1 target 0 lun 2=0Ada3: <TEAC US=
B HS-MS Card 4.00> Removable Direct Access SCSI-0 device=20=0Ada3: 40.000=
MB/s transfers=0Ada3: Attempt to query device size failed: NOT READY, Mediu=
m not present=0A(da4:umass-sim1:1:0:3): error 6=0A(da4:umass-sim1:1:0:3): U=
nretryable Error=0Ada4 at umass-sim1 bus 1 target 0 lun 3=0Ada4: <TEAC USB =
HS-SD Card 4.00> Removable Direct Access SCSI-0 device=20=0Ada4: 40.000MB=
/s transfers=0Ada4: Attempt to query device size failed: NOT READY, Medium =
not present=0A(da1:umass-sim1:1:0:0): error 6=0A(da1:umass-sim1:1:0:0): Unr=
etryable Error=0AOpened disk da1 -> 6=0A(da1:umass-sim1:1:0:0): error 6=0A(=
da1:umass-sim1:1:0:0): Unretryable Error=0AOpened disk da1 -> 6=0A(da1:umas=
s-sim1:1:0:0): error 6=0A(da1:umass-sim1:1:0:0): Unretryable Error=0AOpened=
disk da1 -> 6=0A(da1:umass-sim1:1:0:0): error 6=0A(da1:umass-sim1:1:0:0): =
Unretryable Error=0AOpened disk da1 -> 6=0A(da1:umass-sim1:1:0:0): error 6=
=0A(da1:umass-sim1:1:0:0): Unretryable Error=0AOpened disk da1 -> 6=0A(da2:=
umass-sim1:1:0:1): error 6=0A(da2:umass-sim1:1:0:1): Unretryable Error=0AOp=
ened disk da2 -> 6=0A(da2:umass-sim1:1:0:1): error 6=0A(da2:umass-sim1:1:0:=
1): Unretryable Error=0AOpened disk da2 -> 6=0A(da2:umass-sim1:1:0:1): erro=
r 6=0A(da2:umass-sim1:1:0:1): Unretryable Error=0AOpened disk da2 -> 6=0A(d=
a2:umass-sim1:1:0:1): error 6=0A(da2:umass-sim1:1:0:1): Unretryable Error=
=0AOpened disk da2 -> 6=0A(da2:umass-sim1:1:0:1): error 6=0A(da2:umass-sim1=
:1:0:1): Unretryable Error=0AOpened disk da2 -> 6=0A(da3:umass-sim1:1:0:2):=
error 6=0A(da3:umass-sim1:1:0:2): Unretryable Error=0AOpened disk da3 -> 6=
=0A(da3:umass-sim1:1:0:2): error 6=0A(da3:umass-sim1:1:0:2): Unretryable Er=
ror=0AOpened disk da3 -> 6=0A(da3:umass-sim1:1:0:2): error 6=0A(da3:umass-s=
im1:1:0:2): Unretryable Error=0AOpened disk da3 -> 6=0A(da3:umass-sim1:1:0:=
2): error 6=0A(da3:umass-sim1:1:0:2): Unretryable Error=0AOpened disk da3 -=
> 6=0A(da3:umass-sim1:1:0:2): error 6=0A(da3:umass-sim1:1:0:2): Unretryable=
Error=0AOpened disk da3 -> 6=0AGEOM: new disk da4=0AGEOM_LABEL: Label for =
provider da0s1 is ntfs/Backup.=0A(da4:umass-sim1:1:0:3): error 6=0A(da4:uma=
ss-sim1:1:0:3): Unretryable Error=0AOpened disk da4 -> 6=0A(da4:umass-sim1:=
1:0:3): error 6=0A(da4:umass-sim1:1:0:3): Unretryable Error=0AOpened disk d=
a4 -> 6=0A(da4:umass-sim1:1:0:3): error 6=0A(da4:umass-sim1:1:0:3): Unretry=
able Error=0AOpened disk da4 -> 6=0A(da4:umass-sim1:1:0:3): error 6=0A(da4:=
umass-sim1:1:0:3): Unretryable Error=0AOpened disk da4 -> 6=0A(da4:umass-si=
m1:1:0:3): error 6=0A(da4:umass-sim1:1:0:3): Unretryable Error=0AOpened dis=
k da4 -> 6=0Alock order reversal: (sleepable after non-sleepable)=0A 1st 0x=
ffffff000482a028 struct mount mtx (struct mount mtx) @ /usr/home/sandbox/de=
bug2/src/sys/kern/vfs_subr.c:343=0A 2nd 0xffffff000482a000 vfslock (vfslock=
) @ /usr/home/sandbox/debug2/src/sys/kern/vfs_subr.c:370=0AKDB: stack backt=
race:=0Adb_trace_self_wrapper() at db_trace_self_wrapper+0x2a=0Awitness_che=
ckorder() at witness_checkorder+0x5f3=0A__lockmgr_args() at __lockmgr_args+=
0xc5e=0Avfs_busy() at vfs_busy+0xd0=0Avfs_mount_alloc() at vfs_mount_alloc+=
0x80=0Avfs_mountroot() at vfs_mountroot+0x23b=0Astart_init() at start_init+=
0x62=0Afork_exit() at fork_exit+0x12a=0Afork_trampoline() at fork_trampolin=
e+0xe=0A--- trap 0, rip =3D 0, rsp =3D 0xffffffff81246d30, rbp =3D 0 ---=0A=
lock order reversal: (sleepable after non-sleepable)=0A 1st 0xffffff000482e=
470 vnode interlock (vnode interlock) @ /usr/home/sandbox/debug2/src/sys/fs=
/devfs/devfs_vnops.c:288=0A 2nd 0xffffff000482e448 devfs (devfs) @ /usr/hom=
e/sandbox/debug2/src/sys/kern/vfs_subr.c:2044=0AKDB: stack backtrace:=0Adb_=
trace_self_wrapper() at db_trace_self_wrapper+0x2a=0Awitness_checkorder() a=
t witness_checkorder+0x5f3=0A__lockmgr_args() at __lockmgr_args+0x527=0Avop=
_stdlock() at vop_stdlock+0x39=0AVOP_LOCK1_APV() at VOP_LOCK1_APV+0x9b=0A_v=
n_lock() at _vn_lock+0x50=0Avget() at vget+0x70=0Adevfs_allocv() at devfs_a=
llocv+0xf9=0Adevfs_root() at devfs_root+0x49=0Aset_rootvnode() at set_rootv=
node+0x2d=0Avfs_mountroot() at vfs_mountroot+0x2f8=0Astart_init() at start_=
init+0x62=0Afork_exit() at fork_exit+0x12a=0Afork_trampoline() at fork_tram=
poline+0xe=0A--- trap 0, rip =3D 0, rsp =3D 0xffffffff81246d30, rbp =3D 0 -=
--=0ATrying to mount root from zfs:pool=0Act_to_ts([2008-06-21 11:45:42]) =
=3D 1214048742.000000000=0Astart_init: trying /sbin/init=0AWARNING: Expecte=
d rawoffset 0, found 63=0Alock order reversal: (sleepable after non-sleepab=
le)=0A 1st 0xffffffffc15a2b90 bufwait (bufwait) @ /usr/home/sandbox/debug2/=
src/sys/kern/vfs_bio.c:1796=0A 2nd 0xffffff0004f9aa50 bufobj interlock (buf=
obj interlock) @ /usr/home/sandbox/debug2/src/sys/kern/vfs_bio.c:2442=0A 3r=
d 0xffffffffc15a2938 bufwait (bufwait) @ /usr/home/sandbox/debug2/src/sys/k=
ern/vfs_bio.c:2456=0AKDB: stack backtrace:=0Adb_trace_self_wrapper() at db_=
trace_self_wrapper+0x2a=0Awitness_checkorder() at witness_checkorder+0x5f3=
=0A__lockmgr_args() at __lockmgr_args+0x527=0Agetblk() at getblk+0xda=0Affs=
_sbupdate() at ffs_sbupdate+0xee=0Affs_mount() at ffs_mount+0x1bf1=0Avfs_do=
nmount() at vfs_donmount+0xf6b=0Anmount() at nmount+0xa8=0Asyscall() at sys=
call+0x1dd=0AXfast_syscall() at Xfast_syscall+0xab=0A--- syscall (378, Free=
BSD ELF64, nmount), rip =3D 0x8007945ec, rsp =3D 0x7fffffffda98, rbp =3D 0x=
7fffffffe868 ---=0ALinux ELF exec handler installed=0Asplash: image decoder=
found: daemon_saver=0Arum0: <Belkin Belkin 54g USB Network Adapter, class =
0/0, rev 2.00/0.01, addr 5> on uhub1=0Arum0: MAC/BBP RT2573 (rev 0x2573a), =
RF RT2528=0Arum0: WARNING: using obsoleted IFF_NEEDSGIANT flag=0Arum0: bpf =
attached=0Arum0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps=0Arum0: 11g rates: 1=
Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54=
Mbps=0Awlan0: bpf attached=0Awlan0: Ethernet address: 00:17:3f:72:40:90=0Aw=
lan0: bpf attached=0Arum0: need multicast update callback=0Arum0: need mult=
icast update callback=0A=0A=0AFatal trap 12: page fault while in kernel mod=
e=0Acpuid =3D 1; apic id =3D 01=0Afault virtual address =3D 0x40=0Afault co=
de =3D supervisor read data, page not present=0Ainstruction pointer =3D 0x=
8:0xffffffff803e082e=0Astack pointer =3D 0x10:0xffffffffd75bfb50=0A=
frame pointer =3D 0x10:0xffffffffd75bfb80=0Acode segment =3D base =
0x0, limit 0xfffff, type 0x1b=0A =3D DPL 0, pres 1, long 1, def32 0, gran=
1=0Aprocessor eflags =3D interrupt enabled, resume, IOPL =3D 0=0Acurrent p=
rocess =3D 12 (irq22: ehci0)=0APhysical memory: 4076 MB=0ADumping 403 MB: =
388 372 356 340 324 308 292 276 260 244 228 212 196 180 164 148 132 116 100=
84 68 52 36 20 4=0A
------=_NextPart_000_0004_01C8D4BC.19596BD0
Content-Type: text/plain;
name="dmesg_8.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="dmesg_8.txt"
Copyright (c) 1992-2008 The FreeBSD Project.=0ACopyright (c) 1979, 1980, 19=
83, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A The Regents of the Universi=
ty of California. All rights reserved.=0AFreeBSD is a registered trademark =
of The FreeBSD Foundation.=0AFreeBSD 8.0-CURRENT #2: Sat Jun 21 11:20:35 BS=
T 2008=0A root@w2fzz0vc03.aah-go-on.com:/usr/obj/usr/home/sandbox/debug2=
/src/sys/GENERIC_DTRACE=0AWARNING: WITNESS option enabled, expect reduced p=
erformance.=0ATimecounter "i8254" frequency 1193182 Hz quality 0=0ACPU: Int=
el(R) Core(TM)2 Quad CPU @ 2.66GHz (3192.05-MHz K8-class CPU)=0A =
Origin =3D "GenuineIntel" Id =3D 0x6f7 Stepping =3D 7=0A Features=3D0xb=
febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,P=
SE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>=0A Features2=3D0xe3=
bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>=0A AMD Feature=
s=3D0x20100800<SYSCALL,NX,LM>=0A AMD Features2=3D0x1<LAHF>=0A Cores per p=
ackage: 4=0Ausable memory =3D 4274376704 (4076 MB)=0Aavail memory =3D 4099=
776512 (3909 MB)=0AACPI APIC Table: <DELL B8K >=0AFreeBSD/SMP: Multipr=
ocessor System Detected: 4 CPUs=0A cpu0 (BSP): APIC ID: 0=0A cpu1 (AP): AP=
IC ID: 1=0A cpu2 (AP): APIC ID: 2=0A cpu3 (AP): APIC ID: 3=0AThis module=
(opensolaris) contains code covered by the=0ACommon Development and Distri=
bution License (CDDL)=0Asee http://opensolaris.org/os/licensing/opensolaris=
_license/=0Aioapic0: Changing APIC ID to 8=0Aioapic0 <Version 1.1> irqs 0-2=
3 on motherboard=0Alapic0: Forcing LINT1 to edge trigger=0Akbd1 at kbdmux0=
=0Aath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF541=
3)=0Aacpi0: <DELL B8K > on motherboard=0Aacpi0: [ITHREAD]=0Aacpi0: Power=
Button (fixed)=0Aacpi0: reservation of 0, a0000 (3) failed=0Aacpi0: reserv=
ation of 100000, f00000 (3) failed=0Aacpi0: reservation of 1000000, 9edbcc0=
0 (3) failed=0ATimecounter "ACPI-fast" frequency 3579545 Hz quality 1000=0A=
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0=0Apc=
ib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0=0Apci0: <ACPI PCI bus=
> on pcib0=0Apci0: <memory, RAM> at device 0.1 (no driver attached)=0Apci0:=
<memory, RAM> at device 0.2 (no driver attached)=0Apci0: <memory, RAM> at =
device 0.3 (no driver attached)=0Apci0: <memory, RAM> at device 0.4 (no dri=
ver attached)=0Apci0: <memory, RAM> at device 1.0 (no driver attached)=0Apc=
i0: <memory, RAM> at device 1.1 (no driver attached)=0Apci0: <memory, RAM> =
at device 1.2 (no driver attached)=0Apci0: <memory, RAM> at device 1.3 (no =
driver attached)=0Apci0: <memory, RAM> at device 1.4 (no driver attached)=
=0Apci0: <memory, RAM> at device 1.5 (no driver attached)=0Apci0: <memory, =
RAM> at device 1.6 (no driver attached)=0Apcib1: <ACPI PCI-PCI bridge> at d=
evice 2.0 on pci0=0Apci1: <ACPI PCI bus> on pcib1=0Avgapci0: <VGA-compatibl=
e display> port 0xdc80-0xdcff mem 0xde000000-0xdeffffff,0xa0000000-0xafffff=
ff,0xdc000000-0xddffffff irq 16 at device 0.0 on pci1=0Apcib2: <ACPI PCI-PC=
I bridge> at device 4.0 on pci0=0Apci2: <ACPI PCI bus> on pcib2=0Apcib3: <A=
CPI PCI-PCI bridge> at device 5.0 on pci0=0Apci3: <ACPI PCI bus> on pcib3=
=0Apci0: <memory, RAM> at device 9.0 (no driver attached)=0Aisab0: <PCI-ISA=
bridge> port 0x4f00-0x4fff at device 10.0 on pci0=0Aisa0: <ISA bus> on isa=
b0=0Apci0: <serial bus, SMBus> at device 10.1 (no driver attached)=0Aohci0:=
<OHCI (generic) USB controller> mem 0xdfffc000-0xdfffcfff irq 21 at device=
11.0 on pci0=0Aohci0: [GIANT-LOCKED]=0Aohci0: [ITHREAD]=0Ausb0: OHCI versi=
on 1.0, legacy support=0Ausb0: SMM does not respond, resetting=0Ausb0: <OHC=
I (generic) USB controller> on ohci0=0Ausb0: USB revision 1.0=0Auhub0: <nVi=
dia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0=0Auhub0: 10 po=
rts with 10 removable, self powered=0Aehci0: <EHCI (generic) USB 2.0 contro=
ller> mem 0xdfffbf00-0xdfffbfff irq 22 at device 11.1 on pci0=0Aehci0: [GIA=
NT-LOCKED]=0Aehci0: [ITHREAD]=0Ausb1: waiting for BIOS to give up control=
=0Ausb1: EHCI version 1.0=0Ausb1: companion controller, 10 ports each: usb0=
=0Ausb1: <EHCI (generic) USB 2.0 controller> on ehci0=0Ausb1: USB revision =
2.0=0Auhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on us=
b1=0Auhub1: 10 ports with 10 removable, self powered=0Aumass0: <Seagate Fre=
eAgentDesktop, class 0/0, rev 2.00/0.00, addr 2> on uhub1=0Augen0: <MARVELL=
v1021, class 0/0, rev 2.00/0.01, addr 3> on uhub1=0Arum0: <Belkin Belkin 5=
4g USB Network Adapter, class 0/0, rev 2.00/0.01, addr 4> on uhub1=0Arum0: =
MAC/BBP RT2573 (rev 0x2573a), RF RT2528=0Arum0: WARNING: using obsoleted IF=
F_NEEDSGIANT flag=0Aumass1: <TEAC CA-200, class 0/0, rev 2.00/4.00, addr 5>=
on uhub1=0Aatapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x=
1f7,0x3f6,0x170-0x177,0x376,0xecf0-0xecff at device 13.0 on pci0=0Aata0: <A=
TA channel 0> on atapci0=0Aata0: [ITHREAD]=0Aata1: <ATA channel 1> on atapc=
i0=0Aata1: [ITHREAD]=0Aatapci1: <nVidia nForce MCP55 SATA300 controller> po=
rt 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfecf me=
m 0xdfffd000-0xdfffdfff irq 23 at device 14.0 on pci0=0Aatapci1: [ITHREAD]=
=0Aata2: <ATA channel 0> on atapci1=0Aata2: [ITHREAD]=0Aata3: <ATA channel =
1> on atapci1=0Aata3: [ITHREAD]=0Aatapci2: <nVidia nForce MCP55 SATA300 con=
troller> port 0xfe40-0xfe47,0xfe50-0xfe53,0xfe60-0xfe67,0xfe70-0xfe73,0xfed=
0-0xfedf mem 0xdfffe000-0xdfffefff irq 20 at device 14.1 on pci0=0Aatapci2:=
[ITHREAD]=0Aata4: <ATA channel 0> on atapci2=0Aata4: [ITHREAD]=0Aata5: <AT=
A channel 1> on atapci2=0Aata5: [ITHREAD]=0Aatapci3: <nVidia nForce MCP55 S=
ATA300 controller> port 0xfe80-0xfe87,0xfe90-0xfe93,0xfea0-0xfea7,0xfeb0-0x=
feb3,0xfef0-0xfeff mem 0xdffff000-0xdfffffff irq 21 at device 14.2 on pci0=
=0Aatapci3: [ITHREAD]=0Aata6: <ATA channel 0> on atapci3=0Aata6: [ITHREAD]=
=0Aata7: <ATA channel 1> on atapci3=0Aata7: [ITHREAD]=0Apcib4: <ACPI PCI-PC=
I bridge> at device 15.0 on pci0=0Apci4: <ACPI PCI bus> on pcib4=0Apci4: <u=
nknown> at device 4.0 (no driver attached)=0Apci4: <multimedia, audio> at d=
evice 5.0 (no driver attached)=0Afwohci0: <Texas Instruments TSB43AB22/A> m=
em 0xdadfb800-0xdadfbfff,0xdadfc000-0xdadfffff irq 18 at device 10.0 on pci=
4=0Afwohci0: [FILTER]=0Afwohci0: OHCI version 1.10 (ROM=3D0)=0Afwohci0: No.=
of Isochronous channels is 4.=0Afwohci0: EUI64 80:00:00:00:00:00:00:00=0Af=
wohci0: Phy 1394a available S400, 2 ports.=0Afwohci0: Link S400, max_rec 20=
48 bytes.=0Afirewire0: <IEEE1394(FireWire) bus> on fwohci0=0Afwe0: <Etherne=
t over FireWire> on firewire0=0Aif_fwe0: Fake Ethernet address: 82:00:00:00=
:00:00=0Afwe0: Ethernet address: 82:00:00:00:00:00=0Afwip0: <IP over FireWi=
re> on firewire0=0Afwip0: Firewire address: 80:00:00:00:00:00:00:00 @ 0xfff=
e00000000, S400, maxrec 2048=0Asbp0: <SBP-2/SCSI over FireWire> on firewire=
0=0Adcons_crom0: <dcons configuration ROM> on firewire0=0Adcons_crom0: bus_=
addr 0x228c000=0Afwohci0: Initiate bus reset=0Afwohci0: BUS reset=0Afwohci0=
: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode=0Apcib5: <ACPI PCI-PCI br=
idge> at device 19.0 on pci0=0Apci5: <ACPI PCI bus> on pcib5=0Apcib6: <ACPI=
PCI-PCI bridge> at device 24.0 on pci0=0Apci6: <ACPI PCI bus> on pcib6=0Av=
gapci1: <VGA-compatible display> port 0xbc80-0xbcff mem 0xd1000000-0xd1ffff=
ff,0xc0000000-0xcfffffff,0xd2000000-0xd3ffffff irq 16 at device 0.0 on pci6=
=0Aacpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on =
acpi0=0ATimecounter "HPET" frequency 25000000 Hz quality 900=0Acpu0: <ACPI =
CPU> on acpi0=0Aest0: <Enhanced SpeedStep Frequency Control> on cpu0=0Aest:=
CPU supports Enhanced Speedstep, but is not recognized.=0Aest: cpu_vendor =
GenuineIntel, msr c380c3886000c38=0Adevice_attach: est0 attach returned 6=
=0Ap4tcc0: <CPU Frequency Thermal Control> on cpu0=0Acpu1: <ACPI CPU> on ac=
pi0=0Aest1: <Enhanced SpeedStep Frequency Control> on cpu1=0Aest: CPU suppo=
rts Enhanced Speedstep, but is not recognized.=0Aest: cpu_vendor GenuineInt=
el, msr c380c3886000c38=0Adevice_attach: est1 attach returned 6=0Ap4tcc1: <=
CPU Frequency Thermal Control> on cpu1=0Acpu2: <ACPI CPU> on acpi0=0Aest2: =
<Enhanced SpeedStep Frequency Control> on cpu2=0Aest: CPU supports Enhanced=
Speedstep, but is not recognized.=0Aest: cpu_vendor GenuineIntel, msr c380=
c3886000c38=0Adevice_attach: est2 attach returned 6=0Ap4tcc2: <CPU Frequenc=
y Thermal Control> on cpu2=0Acpu3: <ACPI CPU> on acpi0=0Aest3: <Enhanced Sp=
eedStep Frequency Control> on cpu3=0Aest: CPU supports Enhanced Speedstep, =
but is not recognized.=0Aest: cpu_vendor GenuineIntel, msr c380c3886000c38=
=0Adevice_attach: est3 attach returned 6=0Ap4tcc3: <CPU Frequency Thermal C=
ontrol> on cpu3=0Aacpi_button0: <Power Button> on acpi0=0Aatrtc0: <AT realt=
ime clock> port 0x70-0x7f irq 8 on acpi0=0Aatkbdc0: <Keyboard controller (i=
8042)> port 0x60,0x64 irq 1 on acpi0=0Aatkbd0: <AT Keyboard> irq 1 on atkbd=
c0=0Akbd0 at atkbd0=0Aatkbd0: [GIANT-LOCKED]=0Aatkbd0: [ITHREAD]=0Apsm0: <P=
S/2 Mouse> irq 12 on atkbdc0=0Apsm0: [GIANT-LOCKED]=0Apsm0: [ITHREAD]=0Apsm=
0: model MouseMan+, device ID 0=0Asio0: <16550A-compatible COM port> port 0=
x3f8-0x3ff irq 4 flags 0x10 on acpi0=0Asio0: type 16550A=0Asio0: [FILTER]=
=0Aorm0: <ISA Option ROMs> at iomem 0xc0000-0xcc7ff,0xcc800-0xce7ff,0xce800=
-0xcffff on isa0=0Appc0: cannot reserve I/O port range=0Asc0: <System conso=
le> at flags 0x100 on isa0=0Asc0: VGA <16 virtual consoles, flags=3D0x300>=
=0Asio1: configured irq 3 not in bitmap of probed irqs 0=0Asio1: port may n=
ot be enabled=0Avga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0=
xbffff on isa0=0AWARNING: ZFS is considered to be an experimental feature i=
n FreeBSD.=0ATimecounters tick every 1.000 msec=0Afirewire0: 1 nodes, maxho=
p <=3D 0, cable IRM =3D 0 (me)=0Afirewire0: bus manager 0 (me)=0AZFS filesy=
stem version 6=0AZFS storage pool version 6=0Aad4: 305245MB <Hitachi HDP725=
032GLA360 GM3OA52A> at ata2-master SATA300=0Aad6: 305245MB <Hitachi HDP7250=
32GLA360 GM3OA52A> at ata3-master SATA300=0Aacd0: CDRW <TSSTcorp CD-RW/DVD-=
ROM TS-H493A/D200> at ata4-master SATA150=0Aacd1: DVDR <TSSTcorp DVD+/-RW T=
S-H653A/D500> at ata5-master SATA150=0AGEOM_LABEL: Label for provider ad4s2=
is ntfs/System.=0Aad12: 305245MB <Hitachi HDT725032VLA360 V54OA7EA> at ata=
6-master SATA300=0Aad14: 305245MB <Hitachi HDT725032VLA360 V54OA7EA> at ata=
7-master SATA300=0AGEOM_MIRROR: Device mirror/root launched (4/4).=0AWARNIN=
G: Expected rawoffset 0, found 63=0Alapic1: Forcing LINT1 to edge trigger=
=0ASMP: AP CPU #1 Launched!=0Alapic3: Forcing LINT1 to edge trigger=0ASMP: =
AP CPU #3 Launched!=0Alapic2: Forcing LINT1 to edge trigger=0ASMP: AP CPU #=
2 Launched!=0AWARNING: WITNESS option enabled, expect reduced performance.=
=0Ada0 at umass-sim0 bus 0 target 0 lun 0=0Ada0: <Seagate FreeAgentDesktop =
100D> Fixed Direct Access SCSI-4 device=20=0Ada0: 40.000MB/s transfers=0Ada=
0: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)=0Ada1 at umass-=
sim1 bus 1 target 0 lun 0=0Ada1: <TEAC USB HS-CF Card 4.00> Removable Dir=
ect Access SCSI-0 device=20=0Ada1: 40.000MB/s transfers=0Ada1: Attempt to q=
uery device size failed: NOT READY, Medium not present=0Ada2 at umass-sim1 =
bus 1 target 0 lun 1=0Ada2: <TEAC USB HS-xD/SM 4.00> Removable Direct Acc=
ess SCSI-0 device=20=0Ada2: 40.000MB/s transfers=0Ada2: Attempt to query de=
vice size failed: NOT READY, Medium not present=0Ada3 at umass-sim1 bus 1 t=
arget 0 lun 2=0Ada3: <TEAC USB HS-MS Card 4.00> Removable Direct Access S=
CSI-0 device=20=0Ada3: 40.000MB/s transfers=0Ada3: Attempt to query device =
size failed: NOT READY, Medium not present=0Ada4 at umass-sim1 bus 1 target=
0 lun 3=0Ada4: <TEAC USB HS-SD Card 4.00> Removable Direct Access SCSI-0=
device=20=0Ada4: 40.000MB/s transfers=0Ada4: Attempt to query device size =
failed: NOT READY, Medium not present=0AGEOM_LABEL: Label for provider da0s=
1 is ntfs/Backup.=0Alock order reversal: (sleepable after non-sleepable)=0A=
1st 0xffffff000482a028 struct mount mtx (struct mount mtx) @ /usr/home/san=
dbox/debug2/src/sys/kern/vfs_subr.c:343=0A 2nd 0xffffff000482a000 vfslock (=
vfslock) @ /usr/home/sandbox/debug2/src/sys/kern/vfs_subr.c:370=0AKDB: stac=
k backtrace:=0Adb_trace_self_wrapper() at db_trace_self_wrapper+0x2a=0Awitn=
ess_checkorder() at witness_checkorder+0x5f3=0A__lockmgr_args() at __lockmg=
r_args+0xc5e=0Avfs_busy() at vfs_busy+0xd0=0Avfs_mount_alloc() at vfs_mount=
_alloc+0x80=0Avfs_mountroot() at vfs_mountroot+0x23b=0Astart_init() at star=
t_init+0x62=0Afork_exit() at fork_exit+0x12a=0Afork_trampoline() at fork_tr=
ampoline+0xe=0A--- trap 0, rip =3D 0, rsp =3D 0xffffffff81246d30, rbp =3D 0=
---=0Alock order reversal: (sleepable after non-sleepable)=0A 1st 0xffffff=
0004831470 vnode interlock (vnode interlock) @ /usr/home/sandbox/debug2/src=
/sys/fs/devfs/devfs_vnops.c:288=0A 2nd 0xffffff0004831448 devfs (devfs) @ /=
usr/home/sandbox/debug2/src/sys/kern/vfs_subr.c:2044=0AKDB: stack backtrace=
:=0Adb_trace_self_wrapper() at db_trace_self_wrapper+0x2a=0Awitness_checkor=
der() at witness_checkorder+0x5f3=0A__lockmgr_args() at __lockmgr_args+0x52=
7=0Avop_stdlock() at vop_stdlock+0x39=0AVOP_LOCK1_APV() at VOP_LOCK1_APV+0x=
9b=0A_vn_lock() at _vn_lock+0x50=0Avget() at vget+0x70=0Adevfs_allocv() at =
devfs_allocv+0xf9=0Adevfs_root() at devfs_root+0x49=0Aset_rootvnode() at se=
t_rootvnode+0x2d=0Avfs_mountroot() at vfs_mountroot+0x2f8=0Astart_init() at=
start_init+0x62=0Afork_exit() at fork_exit+0x12a=0Afork_trampoline() at fo=
rk_trampoline+0xe=0A--- trap 0, rip =3D 0, rsp =3D 0xffffffff81246d30, rbp =
=3D 0 ---=0ATrying to mount root from zfs:pool=0AWARNING: Expected rawoffse=
t 0, found 63=0Alock order reversal: (sleepable after non-sleepable)=0A 1st=
0xffffffffc15a2b90 bufwait (bufwait) @ /usr/home/sandbox/debug2/src/sys/ke=
rn/vfs_bio.c:1796=0A 2nd 0xffffff0004fba6a0 bufobj interlock (bufobj interl=
ock) @ /usr/home/sandbox/debug2/src/sys/kern/vfs_bio.c:2442=0A 3rd 0xffffff=
ffc15a2938 bufwait (bufwait) @ /usr/home/sandbox/debug2/src/sys/kern/vfs_bi=
o.c:2456=0AKDB: stack backtrace:=0Adb_trace_self_wrapper() at db_trace_self=
_wrapper+0x2a=0Awitness_checkorder() at witness_checkorder+0x5f3=0A__lockmg=
r_args() at __lockmgr_args+0x527=0Agetblk() at getblk+0xda=0Affs_sbupdate()=
at ffs_sbupdate+0xee=0Affs_mount() at ffs_mount+0x1bf1=0Avfs_donmount() at=
vfs_donmount+0xf6b=0Anmount() at nmount+0xa8=0Asyscall() at syscall+0x1dd=
=0AXfast_syscall() at Xfast_syscall+0xab=0A--- syscall (378, FreeBSD ELF64,=
nmount), rip =3D 0x8007945ec, rsp =3D 0x7fffffffda98, rbp =3D 0x7fffffffe8=
68 ---=0Awlan0: Ethernet address: 00:17:3f:72:40:90=0Arum0: need multicast =
update callback=0Arum0: could not transmit buffer: SHORT_XFER=0A=0A=0AFatal=
trap 12: page fault while in kernel mode=0Acpuid =3D 1; apic id =3D 01=0Af=
ault virtual address =3D 0x8=0Afault code =3D supervisor read data, page n=
ot present=0Ainstruction pointer =3D 0x8:0xffffffff803e0712=0Astack pointer=
=3D 0x10:0xffffffffd75bfb50=0Aframe pointer =3D 0x10:0xfff=
fffffd75bfb80=0Acode segment =3D base 0x0, limit 0xfffff, type 0x1b=0A =
=3D DPL 0, pres 1, long 1, def32 0, gran 1=0Aprocessor eflags =3D interrupt=
enabled, resume, IOPL =3D 0=0Acurrent process =3D 12 (irq22: ehci0)=0APhy=
sical memory: 4076 MB=0ADumping 317 MB: 302 286 270 254 238 222 206 190 174=
158 142 126 110 94 78 62 46 30 14=0A
------=_NextPart_000_0004_01C8D4BC.19596BD0
Content-Type: application/octet-stream;
name="GENERIC_DTRACE"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="GENERIC_DTRACE"
#=0A# GENERIC -- Generic kernel configuration file for FreeBSD/amd64=0A#=0A=
# For more information on this file, please read the handbook section on=0A=
# Kernel Configuration Files:=0A#=0A# http://www.FreeBSD.org/doc/en_US.I=
SO8859-1/books/handbook/kernelconfig-config.html=0A#=0A# The handbook is al=
so available locally in /usr/share/doc/handbook=0A# if you've installed the=
doc distribution, otherwise always see the=0A# FreeBSD World Wide Web serv=
er (http://www.FreeBSD.org/) for the=0A# latest information.=0A#=0A# An exh=
austive list of options and more detailed explanations of the=0A# device li=
nes is also present in the ../../conf/NOTES and NOTES files.=0A# If you are=
in doubt as to the purpose or necessity of a line, check first=0A# in NOTE=
S.=0A#=0A# $FreeBSD: src/sys/amd64/conf/GENERIC,v 1.501 2008/05/27 02:22:32=
yongari Exp $=0A=0Acpu HAMMER=0Aident GENERIC=0A=0A# To statically compi=
le in device wiring instead of /boot/device.hints=0A#hints "GENERIC.hints"=
# Default places to look for devices.=0A=0Amakeoptions DEBUG=3D-g # Buil=
d kernel with gdb(1) debug symbols=0A=0Aoptions SCHED_ULE # ULE scheduler=
=0Aoptions PREEMPTION # Enable kernel thread preemption=0Aoptions INET =
# InterNETworking=0Aoptions INET6 # IPv6 communications protocols=0Aopt=
ions SCTP # Stream Control Transmission Protocol=0Aoptions FFS # Berk=
eley Fast Filesystem=0Aoptions SOFTUPDATES # Enable FFS soft updates supp=
ort=0Aoptions UFS_ACL # Support for access control lists=0Aoptions UFS_=
DIRHASH # Improve performance on big directories=0Aoptions UFS_GJOURNAL =
# Enable gjournal-based UFS journaling=0Aoptions MD_ROOT # MD is a poten=
tial root device=0Aoptions NFSCLIENT # Network Filesystem Client=0Aoption=
s NFSSERVER # Network Filesystem Server=0Aoptions NFSLOCKD # Network Lo=
ck Manager=0Aoptions NFS_ROOT # NFS usable as /, requires NFSCLIENT=0Aopt=
ions NTFS # NT File System=0Aoptions MSDOSFS # MSDOS Filesystem=0Aopt=
ions CD9660 # ISO 9660 Filesystem=0Aoptions PROCFS # Process filesyst=
em (requires PSEUDOFS)=0Aoptions PSEUDOFS # Pseudo-filesystem framework=
=0Aoptions GEOM_PART_GPT # GUID Partition Tables.=0Aoptions GEOM_LABEL =
# Provides labelization=0Aoptions COMPAT_43TTY # BSD 4.3 TTY compat [KEEP=
THIS!]=0Aoptions COMPAT_IA32 # Compatible with i386 binaries=0Aoptions =
COMPAT_FREEBSD4 # Compatible with FreeBSD4=0Aoptions COMPAT_FREEBSD5 # C=
ompatible with FreeBSD5=0Aoptions COMPAT_FREEBSD6 # Compatible with FreeB=
SD6=0Aoptions COMPAT_FREEBSD7 # Compatible with FreeBSD7=0Aoptions SCSI_=
DELAY=3D5000 # Delay (in ms) before probing SCSI=0Aoptions KTRACE # ktr=
ace(1) support=0Aoptions STACK # stack(9) support=0Aoptions SYSVSHM #=
SYSV-style shared memory=0Aoptions SYSVMSG # SYSV-style message queues=
=0Aoptions SYSVSEM # SYSV-style semaphores=0Aoptions _KPOSIX_PRIORITY_S=
CHEDULING # POSIX P1003_1B real-time extensions=0Aoptions KBD_INSTALL_CDEV=
# install a CDEV entry in /dev=0Aoptions STOP_NMI # Stop CPUS using NMI =
instead of IPI=0Aoptions AUDIT # Security event auditing=0A=0A# Debuggin=
g for use in -current=0Aoptions KDB # Enable kernel debugger support.=0A=
options DDB # Support DDB.=0Aoptions GDB # Support remote GDB.=0Aopti=
ons INVARIANTS # Enable calls of extra sanity checking=0Aoptions INVARIA=
NT_SUPPORT # Extra sanity checks of internal structures, required by INVARI=
ANTS=0Aoptions WITNESS # Enable checks to detect deadlocks and cycles=0A=
options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed=0A=0Ao=
ptions KDTRACE_HOOKS=0Aoptions DDB_CTF=0A=0A# Make an SMP-capable kernel =
by default=0Aoptions SMP # Symmetric MultiProcessor Kernel=0A=0A# CPU fr=
equency control=0Adevice cpufreq=0A=0A# Bus support.=0Adevice acpi=0Adevi=
ce pci=0A=0A# Floppy drives=0Adevice fdc=0A=0A# ATA and ATAPI devices=0Ad=
evice ata=0Adevice atadisk # ATA disk drives=0Adevice ataraid # ATA RA=
ID drives=0Adevice atapicd # ATAPI CDROM drives=0Adevice atapifd # ATAP=
I floppy drives=0Adevice atapist # ATAPI tape drives=0Aoptions ATA_STATI=
C_ID # Static device numbering=0A=0A# SCSI Controllers=0Adevice ahc # AHA=
2940 and onboard AIC7xxx devices=0Aoptions AHC_REG_PRETTY_PRINT # Print re=
gister bitfields in debug=0A # output. Adds ~128k to driver.=0Adevice =
ahd # AHA39320/29320 and onboard AIC79xx devices=0Aoptions AHD_REG_PRETT=
Y_PRINT # Print register bitfields in debug=0A # output. Adds ~215k to=
driver.=0Adevice amd # AMD 53C974 (Tekram DC-390(T))=0Adevice hptiop #=
Highpoint RocketRaid 3xxx series=0Adevice isp # Qlogic family=0A#device =
ispfw # Firmware for QLogic HBAs- normally a module=0Adevice mpt # LSI-=
Logic MPT-Fusion=0A#device ncr # NCR/Symbios Logic=0Adevice sym # NCR/S=
ymbios Logic (newer chipsets + those of `ncr')=0Adevice trm # Tekram DC39=
5U/UW/F DC315U adapters=0A=0Adevice adv # Advansys SCSI adapters=0Adevice=
adw # Advansys wide SCSI adapters=0Adevice aic # Adaptec 15[012]x SCSI=
adapters, AIC-6[23]60.=0Adevice bt # Buslogic/Mylex MultiMaster SCSI ada=
pters=0A=0A# SCSI peripherals=0Adevice scbus # SCSI bus (required for SCS=
I)=0Adevice ch # SCSI media changers=0Adevice da # Direct Access (disks=
)=0Adevice sa # Sequential Access (tape etc)=0Adevice cd # CD=0Adevice =
pass # Passthrough device (direct SCSI access)=0Adevice ses # SCSI Envi=
ronmental Services (and SAF-TE)=0A=0A# RAID controllers interfaced to the S=
CSI subsystem=0Adevice amr # AMI MegaRAID=0Adevice arcmsr # Areca SATA =
II RAID=0Adevice ciss # Compaq Smart RAID 5*=0Adevice dpt # DPT Smartca=
che III, IV - See NOTES for options=0Adevice hptmv # Highpoint RocketRAID=
182x=0Adevice hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx=0Adevi=
ce iir # Intel Integrated RAID=0Adevice ips # IBM (Adaptec) ServeRAID=
=0Adevice mly # Mylex AcceleRAID/eXtremeRAID=0Adevice twa # 3ware 9000 =
series PATA/SATA RAID=0A=0A# RAID controllers=0Adevice aac # Adaptec FSA =
RAID=0Adevice aacp # SCSI passthrough for aac (requires CAM)=0Adevice id=
a # Compaq Smart RAID=0Adevice mfi # LSI MegaRAID SAS=0Adevice mlx # M=
ylex DAC960 family=0A#XXX pointer/int warnings=0A#device pst # Promise Su=
pertrak SX6000=0Adevice twe # 3ware ATA RAID=0A=0A# atkbdc0 controls both=
the keyboard and the PS/2 mouse=0Adevice atkbdc # AT keyboard controller=
=0Adevice atkbd # AT keyboard=0Adevice psm # PS/2 mouse=0A=0Adevice kb=
dmux # keyboard multiplexer=0A=0Adevice vga # VGA video card driver=0A=
=0Adevice splash # Splash screen and screen saver support=0A=0A# syscons =
is the default console driver, resembling an SCO console=0Adevice sc=0A=0A=
device agp # support several AGP chipsets=0A=0A# PCCARD (PCMCIA) support=
=0A# PCMCIA and cardbus bridge support=0Adevice cbb # cardbus (yenta) bri=
dge=0Adevice pccard # PC Card (16-bit) bus=0Adevice cardbus # CardBus (=
32-bit) bus=0A=0A# Serial (COM) ports=0Adevice sio # 8250, 16[45]50 based=
serial ports=0Adevice uart # Generic UART driver=0A=0A# Parallel port=0A=
device ppc=0Adevice ppbus # Parallel port bus (required)=0Adevice lpt =
# Printer=0Adevice plip # TCP/IP over parallel=0Adevice ppi # Parallel =
port interface device=0A#device vpo # Requires scbus and da=0A=0A# If you=
've got a "dumb" serial or parallel PCI card that is=0A# supported by the p=
uc(4) glue driver, uncomment the following=0A# line to enable it (connects =
to sio, uart and/or ppc drivers):=0A#device puc=0A=0A# PCI Ethernet NICs.=
=0Adevice de # DEC/Intel DC21x4x (``Tulip'')=0Adevice em # Intel PRO/10=
00 adapter Gigabit Ethernet Card=0Adevice ixgb # Intel PRO/10GbE Ethernet=
Card=0Adevice le # AMD Am7900 LANCE and Am79C9xx PCnet=0Adevice ti # A=
lteon Networks Tigon I/II gigabit Ethernet=0Adevice txp # 3Com 3cR990 (``=
Typhoon'')=0Adevice vx # 3Com 3c590, 3c595 (``Vortex'')=0A=0A# PCI Ethern=
et NICs that use the common MII bus controller code.=0A# NOTE: Be sure to k=
eep the 'device miibus' line in order to use these NICs!=0Adevice miibus =
# MII bus support=0Adevice age # Attansic/Atheros L1 Gigabit Ethernet=0Ad=
evice bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet=0Adevice bfe # Br=
oadcom BCM440x 10/100 Ethernet=0Adevice bge # Broadcom BCM570xx Gigabit E=
thernet=0Adevice dc # DEC/Intel 21143 and various workalikes=0Adevice fx=
p # Intel EtherExpress PRO/100B (82557, 82558)=0Adevice jme # JMicron JM=
C250 Gigabit/JMC260 Fast Ethernet=0Adevice lge # Level 1 LXT1001 gigabit =
Ethernet=0Adevice msk # Marvell/SysKonnect Yukon II Gigabit Ethernet=0Ade=
vice nfe # nVidia nForce MCP on-board Ethernet=0Adevice nge # NatSemi D=
P83820 gigabit Ethernet=0A#device nve # nVidia nForce MCP on-board Ethern=
et Networking=0Adevice pcn # AMD Am79C97x PCI 10/100 (precedence over 'le=
')=0Adevice re # RealTek 8139C+/8169/8169S/8110S=0Adevice rl # RealTek =
8129/8139=0Adevice sf # Adaptec AIC-6915 (``Starfire'')=0Adevice sis # =
Silicon Integrated Systems SiS 900/SiS 7016=0Adevice sk # SysKonnect SK-9=
84x & SK-982x gigabit Ethernet=0Adevice ste # Sundance ST201 (D-Link DFE-=
550TX)=0Adevice tl # Texas Instruments ThunderLAN=0Adevice tx # SMC Eth=
erPower II (83c170 ``EPIC'')=0Adevice vge # VIA VT612x gigabit Ethernet=
=0Adevice vr # VIA Rhine, Rhine II=0Adevice wb # Winbond W89C840F=0Adev=
ice xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')=0A=0A# ISA Ethernet NICs=
pccard NICs included.=0Adevice cs # Crystal Semiconductor CS89x0 NIC=
=0A# 'device ed' requires 'device miibus'=0Adevice ed # NE[12]000, SMC Ul=
tra, 3c503, DS8390 cards=0Adevice ex # Intel EtherExpress Pro/10 and Pro/=
10+=0Adevice ep # Etherlink III based cards=0Adevice fe # Fujitsu MB869=
6x based cards=0Adevice sn # SMC's 9000 series of Ethernet chips=0Adevice=
xe # Xircom pccard Ethernet=0A=0A# Wireless NIC cards=0Adevice wlan # =
802.11 support=0Aoptions IEEE80211_DEBUG # enable debug msgs=0Aoptions IE=
EE80211_AMPDU_AGE # age frames in AMPDU reorder q's=0Adevice wlan_wep # 80=
2.11 WEP support=0Adevice wlan_ccmp # 802.11 CCMP support=0Adevice wlan_t=
kip # 802.11 TKIP support=0Adevice wlan_amrr # AMRR transmit rate control =
algorithm=0Adevice an # Aironet 4500/4800 802.11 wireless NICs.=0Adevice =
ath # Atheros pci/cardbus NIC's=0Adevice ath_hal # Atheros HAL (Hardwar=
e Access Layer)=0Adevice ath_rate_sample # SampleRate tx rate control for =
ath=0Adevice ral # Ralink Technology RT2500 wireless NICs.=0Adevice wi =
# WaveLAN/Intersil/Symbol 802.11 wireless NICs.=0A=0A# Pseudo devices.=0Ade=
vice loop # Network loopback=0Adevice random # Entropy device=0Adevice =
ether # Ethernet support=0Adevice sl # Kernel SLIP=0Adevice ppp # Ker=
nel PPP=0Adevice tun # Packet tunnel.=0Adevice pty # Pseudo-ttys (telne=
t etc)=0Adevice md # Memory "disks"=0Adevice gif # IPv6 and IPv4 tunnel=
ing=0Adevice faith # IPv6-to-IPv4 relaying (translation)=0Adevice firmwa=
re # firmware assist module=0A=0A# The `bpf' device enables the Berkeley Pa=
cket Filter.=0A# Be aware of the administrative consequences of enabling th=
is!=0A# Note that 'bpf' is required for DHCP.=0Adevice bpf # Berkeley pac=
ket filter=0A=0A# USB support=0Adevice uhci # UHCI PCI->USB interface=0Ad=
evice ohci # OHCI PCI->USB interface=0Adevice ehci # EHCI PCI->USB inte=
rface (USB 2.0)=0Adevice usb # USB Bus (required)=0A#device udbp # USB =
Double Bulk Pipe devices=0Adevice ugen # Generic=0Adevice uhid # "Human=
Interface Devices"=0Adevice ukbd # Keyboard=0Adevice ulpt # Printer=0A=
device umass # Disks/Mass storage - Requires scbus and da=0Adevice ums =
# Mouse=0Adevice ural # Ralink Technology RT2500USB wireless NICs=0Adevic=
e rum # Ralink Technology RT2501USB wireless NICs=0Adevice urio # Diamo=
nd Rio 500 MP3 player=0Adevice uscanner # Scanners=0A# USB Serial devices=
=0Adevice ucom # Generic com ttys=0Adevice uark # Technologies ARK3116 =
based serial adapters=0Adevice ubsa # Belkin F5U103 and compatible serial=
adapters=0Adevice ubser # BWCT console serial adapters=0Adevice uftdi =
# For FTDI usb serial adapters=0Adevice uipaq # Some WinCE based devices=
=0Adevice uplcom # Prolific PL-2303 serial adapters=0Adevice uslcom # S=
I Labs CP2101/CP2102 serial adapters=0Adevice uvisor # Visor and Palm dev=
ices=0Adevice uvscom # USB serial support for DDI pocket's PHS=0A# USB Et=
hernet, requires miibus=0Adevice aue # ADMtek USB Ethernet=0Adevice axe =
# ASIX Electronics USB Ethernet=0Adevice cdce # Generic USB over Etherne=
t=0Adevice cue # CATC USB Ethernet=0Adevice kue # Kawasaki LSI USB Ethe=
rnet=0Adevice rue # RealTek RTL8150 USB Ethernet=0Adevice udav # Davico=
m DM9601E USB=0A=0A# FireWire support=0Adevice firewire # FireWire bus cod=
e=0Adevice sbp # SCSI over FireWire (Requires scbus and da)=0Adevice fwe=
# Ethernet over FireWire (non-standard!)=0Adevice fwip # IP over FireWi=
re (RFC 2734,3146)=0Adevice dcons # Dumb console driver=0Adevice dcons_c=
rom # Configuration ROM for dcons=0A
------=_NextPart_000_0004_01C8D4BC.19596BD0
Content-Type: text/plain;
name="uname.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="uname.txt"
FreeBSD w2fzz0vc03.aah-go-on.com 8.0-CURRENT FreeBSD 8.0-CURRENT #2: Sat Ju=
n 21 11:20:35 BST 2008 root@w2fzz0vc03.aah-go-on.com:/usr/obj/usr/home/=
sandbox/debug2/src/sys/GENERIC_DTRACE amd64=0A
------=_NextPart_000_0004_01C8D4BC.19596BD0
Content-Type: application/octet-stream;
name="usbdevs-v-no-rum"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="usbdevs-v-no-rum"
Controller /dev/usb0:=0Aaddr 1: full speed, self powered, config 1, OHCI ro=
ot hub(0x0000), nVidia(0x0000), rev 1.00=0A port 1 powered=0A port 2 powere=
d=0A port 3 powered=0A port 4 powered=0A port 5 powered=0A port 6 powered=
=0A port 7 powered=0A port 8 addr 2: full speed, power 90 mA, config 1, LEX=
R PLUG DRIVE(0x0080), LEXR PLUG DRIVE(0x05dc), rev 0.01=0A port 9 powered=
=0A port 10 powered=0AController /dev/usb1:=0Aaddr 1: high speed, self powe=
red, config 1, EHCI root hub(0x0000), nVidia(0x0000), rev 1.00=0A port 1 po=
wered=0A port 2 addr 2: high speed, self powered, config 1, FreeAgentDeskto=
p(0x3000), Seagate(0x0bc2), rev 0.00=0A port 3 powered=0A port 4 powered=0A=
port 5 powered=0A port 6 powered=0A port 7 addr 3: high speed, power 500 m=
A, config 1, v1021(0x8051), MARVELL(0x1799), rev 0.01=0A port 8 powered=0A =
port 9 powered=0A port 10 addr 4: high speed, power 500 mA, config 1, CA-20=
0(0x0200), TEAC(0x0644), rev 4.00=0A
------=_NextPart_000_0004_01C8D4BC.19596BD0--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000301c8d4b3$b79503d0$26bf0b70$>