Date: Wed, 21 Jul 1999 09:28:48 -0500 From: "Geocrawler.com" <archiver@db.geocrawler.com> To: freebsd-scsi@freebsd.org Subject: Eliant 820 tape problems Message-ID: <199907211428.JAA13990@db.geocrawler.com>
next in thread | raw e-mail | index | archive | help
This message was sent from Geocrawler.com by "Carey Nairn" <cpn@mailroom.dpac.tas.gov.au>
Be sure to reply to that address.
Hi all,
just trying to use dump to backup a FreeBSD-3.1R system to an ExaByte
Eliant 820 drive.
this is what I get when I try to use dump on the command line:
dump 0uBf 4585536 /dev/nrsa0 /
DUMP: Date of this level 0 dump: Thu Jul 15 00:40:56 1999
DUMP: Date of last level 0 dump: the epoch
DUMP: Dumping /dev/rwd0s1a (/) to /dev/nrsa0
DUMP: mapping (Pass I) [regular files]
DUMP: mapping (Pass II) [directories]
DUMP: estimated 21102 tape blocks on 0.00 tape(s).
DUMP: dumping (Pass III) [directories]
DUMP: dumping (Pass IV) [regular files]
DUMP: write error 10120 blocks into volume 1
DUMP: Do you want to restart?: ("yes" or "no")
I also get the following console messages:
(sa0:aha0:0:4:0): LOAD UNLOAD. CDB: 1b 0 0 0 1 0
(sa0:aha0:0:4:0): HARDWARE FAILURE csi:0,0,0,5 asc:10,0
(sa0:aha0:0:4:0): ID CRC or ECC error
(sa0:aha0:0:4:0): WRITE(06). CDB: a 0 0 28 0 0
(sa0:aha0:0:4:0): Deferred Error: HARDWARE FAILURE info:2800 csi:0,0,0,1
asc:10,0
(sa0:aha0:0:4:0): ID CRC or ECC error
(sa0:aha0:0:4:0): WRITE(06). CDB: a 0 0 28 0 0
(sa0:aha0:0:4:0): HARDWARE FAILURE csi:0,0,0,1 asc:10,0
(sa0:aha0:0:4:0): ID CRC or ECC error
(sa0:aha0:0:4:0): WRITE FILEMARKS. CDB: 10 0 0 0 2 0
(sa0:aha0:0:4:0): HARDWARE FAILURE csi:0,0,0,1 asc:10,0
(sa0:aha0:0:4:0): ID CRC or ECC error
(sa0:aha0:0:4:0): failure at writing filemarks - opting for safety
(sa0:aha0:0:4:0): REWIND. CDB: 1 0 0 0 0 0
(sa0:aha0:0:4:0): HARDWARE FAILURE csi:0,0,0,1 asc:10,0
(sa0:aha0:0:4:0): ID CRC or ECC error
The SCSI system portion from dmesg is:
aha0: AHA-1542CF FW Rev. C.0 (ID=45) SCSI Host Adapter, SCSI ID 7, 16 CCBs
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Intel Pentium detected, installing workaround for F00F bug
Waiting 15 seconds for SCSI devices to settle
sa0 at aha0 bus 0 target 4 lun 0
sa0: <EXABYTE EXB-85058HE-0000 0076> Removable Sequential Access SCSI-2
device
sa0: 3.300MB/s transfers
changing root device to wd0s1a
cd0 at aha0 bus 0 target 0 lun 0
cd0: <MATSHITA CD-ROM CR-506 8S04> Removable CD-ROM SCSI-2 device
cd0: 3.300MB/s transfers
cd0: cd present [267400 x 2048 byte records]
Any thought about why I can't write to the tape?
cheers,
Carey Nairn
NB please reply to me at cpn@mailroom.dpac.tas.gov.au
Geocrawler.com - The Knowledge Archive
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199907211428.JAA13990>