Date: Mon, 31 Oct 2005 15:53:25 +0100 (CET) From: Tom.Lislegaard@proact.no To: freebsd-current@freebsd.org, freebsd-mobile@freebsd.org Subject: 6.0RC1 - enabling synaptics touchpad freezes machine Message-ID: <20051031154521.G3650@tom.internal.proact.no>
next in thread | raw e-mail | index | archive | help
I try to enable touchpad support on an Acer Travelmate 8104
by setting hw.psm.synaptics_support="1" in loader.conf.
After that any access to psm0 seems to hang the machine solid.
For instance running 'moused -p /dev/psm0' or starting Xorg with
psm0 as mousedevice freezes the machine immediately, and I have
to use the power button to recover.
This is an out-of-the-box 6.0RC1 Generic kernel. The only
other change I've done is to disable acpi, though that doesn't
change anything regarding the touchpad problem.
Is anyone else seeing something similar (and preferably have
a solution)?
Output of dmesg is found below.
-tom
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RC1 #0: Sun Oct 9 20:32:57 UTC 2005
root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 2.00GHz (1995.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8
Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0x180<EST,TM2>
AMD Features=0x100000<NX>
real memory = 1072168960 (1022 MB)
avail memory = 1040318464 (992 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 10 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <PCI-PCI bridge> irq 10 at device 28.0 on pci0
pci9: <PCI bus> on pcib2
pcib3: <PCI-PCI bridge> irq 10 at device 28.1 on pci0
pci10: <PCI bus> on pcib3
pcib4: <PCI-PCI bridge> irq 11 at device 28.2 on pci0
pci2: <PCI bus> on pcib4
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1860-0x187f irq 10 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc8004000-0xc80043ff irq 11 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib5: <PCI-PCI bridge> at device 30.0 on pci0
pci6: <PCI bus> on pcib5
pci6: <network> at device 3.0 (no driver attached)
bge0: <Broadcom BCM5788 Gigabit Ethernet, ASIC rev. 0x3003> mem 0xc8200000-0xc820ffff irq 10 at device 6.0 on pci6
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:c0:9f:c0:73:7a
fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem 0xc8215000-0xc82157ff,0xc8210000-0xc8213fff irq 11 at device 7.0 on pci6
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:c0:9f:00:00:67:04:ee
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:c0:9f:67:04:ee
fwe0: Ethernet address: 02:c0:9f:67:04:ee
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
cbb0: <PCI-CardBus Bridge> mem 0xc8216000-0xc8216fff irq 11 at device 9.0 on pci6
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <PCI-CardBus Bridge> mem 0xc8217000-0xc8217fff irq 10 at device 9.1 on pci6
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci6: <base peripheral> at device 9.2 (no driver attached)
cbb2: <PCI-CardBus Bridge> at device 9.3 on pci6
cardbus2: <CardBus bus> on cbb2
pccard2: <16-bit PCCard bus> on cbb2
cbb: Unable to map IRQ...
device_attach: cbb2 attach returned 12
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18a0-0x18af at device 31.2 on pci0
atapci0: failed to enable memory mapping!
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xe0000-0xe17ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <INT0800> can't assign resources (memory)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <HWPc224> can't assign resources (port)
ppc1: parallel port not found.
ugen0: Broadcom BCM2035, rev 1.10/1.00, addr 2
Timecounter "TSC" frequency 1995015913 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 95396MB <Seagate ST9100823A 3.01> at ata0-master SATA150
acd0: FAILURE - MODE_SENSE_BIG timed out
acd0: DVDR <HL-DT-ST DVDRAM GMA-4080N/0H35> at ata1-master UDMA33
Trying to mount root from ufs:/dev/ad0s2a
bge0: link state changed to UP
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20051031154521.G3650>