Date: Fri, 29 Oct 1999 05:10:07 -0700 (PDT) From: Alfred Perlstein <bright@wintelcom.net> To: current@freebsd.org Cc: grog@freebsd.org Subject: (vinum?) lockups in strategy routines? Message-ID: <Pine.BSF.4.05.9910290429270.12797-100000@fw.wintelcom.net>
next in thread | raw e-mail | index | archive | help
Anyone running -current as of Oct 28, 1999 getting lockups in
device strategy routines?
I thought I'd be able to get a dump but it didn't work.
Specifically I'm running vinum in striping mode and the new ata-drivers.
10 Aug 1999 14:27:51.389915 stripe /dev/da0e /dev/da1e
A kernel from Wed Oct 6 seems fine (able to buildworld).
grog? :)
I hope to get a crashdump soon, is there anything i can do help
debug this in the meanwhile?
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #4: Wed Oct 27 06:56:03 PDT 1999
bright@thumper:/home/src/sys/compile/thumper
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 536858624 (524276K bytes)
config> irq pcm0 5
avail memory = 517173248 (505052K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0355000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc035509c.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vga-pci0: <Matrox model 0521 graphics accelerator> irq 16 at device 0.0 on pci1
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
ata-pci0: <Intel PIIX4 IDE controller> at device 4.1 on pci0
ata-pci0: Busmastering DMA supported
ata0 at 0x01f0 irq 14 on ata-pci0
chip1: <UHCI USB controller> irq 19 at device 4.2 on pci0
Timecounter "PIIX" frequency 3579545 Hz
chip2: <Intel 82371AB Power management controller> at device 4.3 on pci0
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> irq 19 at device 6.0 on pci0
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
bktr0: <BrookTree 878> irq 17 at device 11.0 on pci0
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicsmb0: <I2C to SMB bridge> on iicbus0
smbus0: <System Management Bus> on iicsmb0
smb0: <SMBus general purpose I/O> on smbus0
iic0: <I2C general purpose I/O> on iicbus0
smbus1: <System Management Bus> on bti2c0
smb1: <SMBus general purpose I/O> on smbus1
bktr0: Hauppauge Model 62471 A2
Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner, dbx stereo.
pci0: unknown card (vendor=0x109e, dev=0x0878) at 11.1 irq 17
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> irq 16 at device 12.0 on pci0
fxp0: Ethernet address 00:90:27:3c:77:aa
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pcm0: <SoundBlaster 16 4.5> at port 0x220-0x22f irq 5 drq 3 flags 0x15 on isa0
ppc0 at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
SMP: AP CPU #1 Launched!
ad0: <Maxtor 82560A4/AA8Z2726> ATA-3 disk at ata0 as master
ad0: 2442MB (5001696 sectors), 4962 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 0 depth queue, DMA
Creating DISK ad0
Creating DISK wd0
Waiting 6 seconds for SCSI devices to settle
Creating DISK da0
Creating DISK da1
Creating DISK cd0
Creating DISK cd1
changing root device to wd0s1a
da0 at ahc0 bus 0 target 2 lun 0
da0: <QUANTUM VIKING II 9.1WSE 5520> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da0: 8709MB (17836668 512 byte sectors: 255H 63S/T 1110C)
da1 at ahc0 bus 0 target 4 lun 0
da1: <QUANTUM VIKING II 9.1WSE 5520> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da1: 8709MB (17836668 512 byte sectors: 255H 63S/T 1110C)
WARNING: / was not properly dismounted
vinum: loaded
vinum: reading configuration from /dev/da0s1e
vinum: updating configuration from /dev/da1s1e
cd0 at ahc0 bus 0 target 0 lun 0
cd0: <TOSHIBA CD-ROM XM-6201TA 1037> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 16)
cd0: cd present [213264 x 2048 byte records]
cd1 at ahc0 bus 0 target 3 lun 0
cd1: <YAMAHA CRW4416S 1.0e> Removable CD-ROM SCSI-2 device
cd1: 8.333MB/s transfers (8.333MHz, offset 31)
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed
kernel config:
# Thumper
machine "i386"
cpu "I686_CPU"
ident "thumper"
maxusers 256
# Create a SMP capable kernel (mandatory options):
options SMP # Symmetric MultiProcessor Kernel
options APIC_IO # Symmetric (APIC) I/O
options NCPU=4 # number of CPUs
options NBUS=5 # number of busses
options NAPIC=2 # number of IO APICs
options NINTR=25 # number of INTs
options INVARIANTS
options INCLUDE_CONFIG_FILE # Include this file in kernel
#CPU/Machine Options
options USER_LDT #allow user-level control of i386 ldt
options KTRACE #kernel tracing
options PERFMON
options DDB
options BREAK_TO_DEBUGGER #a BREAK on a comconsole goes to
options P1003_1B
options _KPOSIX_PRIORITY_SCHEDULING
options _KPOSIX_VERSION=199309L
#File systems
options FDESC #File descriptor filesystem
options KERNFS #Kernel filesystem
options UMAPFS #UID map filesystem
options NULLFS #NULL filesystem
options MFS #Memory File System
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=6000 #Be pessimistic about Joe SCSI device
options UCONSOLE #Allow users to grab the console
#options FAILSAFE #Be conservative
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #kernel tracing
options SYSVSHM
options SYSVSEM
options SYSVMSG
options MAXDSIZ=(256*1024*1024)
options DFLDSIZ=(256*1024*1024)
options ICMP_BANDLIM
#config kernel root on wd0
#Devices
controller isa0
controller eisa0
controller pci0
controller fdc0 at isa? port "IO_FD1" irq 6 drq 2
disk fd0 at fdc0 drive 0
disk fd1 at fdc0 drive 1
#tape ft0 at fdc0 drive 2
#IDE
controller ata0
device atadisk0 # ATA disk drives
device atapicd0 # ATAPI CDROM drives
device atapifd0 # ATAPI floppy drives
device atapist0 # ATAPI tape drives
#SCSI
controller scbus0
controller ahc0
device da0
device sa0 #SCSI tapes
device cd0 #SCSI CD-ROMs
device pass0
#Sound/PnP
controller pnp0
device pcm0 at isa? port 0x220 irq 10 drq 3 flags 0x15
#Parrallel Port
controller ppbus0
controller vpo0 at ppbus?
device lpt0 at ppbus?
device ppi0 at ppbus?
controller ppc0 at isa? port ? irq 7
# syscons is the default console driver, resembling an SCO console
device sc0 at isa?
options SC_HISTORY_SIZE=200 # number of history buffer lines
options SC_DISABLE_REBOOT # disable reboot key sequence
# The keyboard controller; it controlls the keyboard and the PS/2 mouse.
controller atkbdc0 at isa? port IO_KBD
# The AT keyboard
device atkbd0 at atkbdc? irq 1
# PS/2 mouse
device psm0 at atkbdc? irq 12
# The video card driver.
device vga0 at isa? port ? conflicts
# Splash screen at start up! Screen savers require this too.
pseudo-device splash
device npx0 at nexus? port "IO_NPX" irq 13
# Laptop support (see LINT for more options)
device apm0 at nexus? flags 0x31 # Advanced Power Management
device sio0 at isa? port "IO_COM1" irq 4
device sio1 at isa? port "IO_COM2" irq 3
controller smbus0
device smb0 at smbus?
controller iicbus0
controller iicbb0
device ic0 at iicbus?
device iic0 at iicbus?
device iicsmb0 at iicbus?
device bktr0
device ed0 at pci?
pseudo-device vn 4
pseudo-device loop
pseudo-device ether
pseudo-device sl 1
pseudo-device ppp 1
pseudo-device tun 1
pseudo-device pty 256
pseudo-device bpf 4
pseudo-device snp 4
pseudo-device gzip # Exec gzipped a.out's
device fxp0
options INVARIANT_SUPPORT
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9910290429270.12797-100000>