Date: Tue, 10 Nov 2015 21:04:52 -0500 From: "Curtis Hamilton" <hamiltcl@verizon.net> To: "'Adrian Chadd'" <adrian@freebsd.org> Cc: "'FreeBSD PowerPC ML'" <freebsd-ppc@freebsd.org> Subject: RE: Airport Extreme WiFi Broken in FreeBSD 10.2 Message-ID: <00aa01d11c25$5b095140$111bf3c0$@verizon.net> In-Reply-To: <CAJ-Vmok30bBeaV1rBidvOsyY7ExOyhuZUh87wsamT0VaBPjwjg@mail.gmail.com> References: <CAJ-Vmom0qAS6EmWgvMQdLotsVyKfmJuVKt9QTg2OJD6WOiVjrw@mail.gmail.com> <008401d11bb3$c4c31430$4e493c90$@verizon.net> <CAJ-Vmok30bBeaV1rBidvOsyY7ExOyhuZUh87wsamT0VaBPjwjg@mail.gmail.com>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --] I've checked the log and don't see any warnings. Attached is my current log. What am I missing? Unfortunately, the system does not complete the boot process with the bwi module loaded. so I do not have a log for that process. BTW, I've tried manually loading the module after booting, both without and with the airport firmware. Without the airport firmware the system complains but continues to run, however with the firmware the system locks up. -Curtis -----Original Message----- From: adrian.chadd@gmail.com [mailto:adrian.chadd@gmail.com] On Behalf Of Adrian Chadd Sent: Tuesday, November 10, 2015 3:54 PM To: Curtis Hamilton <hamiltcl@verizon.net> Cc: FreeBSD PowerPC ML <freebsd-ppc@freebsd.org> Subject: Re: Airport Extreme WiFi Broken in FreeBSD 10.2 It's not initialising fine; it's actually logging a warning. :) -a On 10 November 2015 at 04:31, Curtis Hamilton <hamiltcl@verizon.net> wrote: > I'll investigate. My initial presumption that it was a bwi module > issue is because ata2 initializes just fine without the bwi module. > > -----Original Message----- > From: adrian.chadd@gmail.com [mailto:adrian.chadd@gmail.com] On Behalf > Of Adrian Chadd > Sent: Monday, November 09, 2015 4:44 PM > To: Curtis Hamilton <hamiltcl@verizon.net> > Cc: FreeBSD PowerPC ML <freebsd-ppc@freebsd.org> > Subject: Re: Airport Extreme WiFi Broken in FreeBSD 10.2 > > Hi, > > It looks like there's something up with the memory management, not wifi. > ata2 failing and bwi failing in DMA memory allocation is the hint. :) > > > > -a > > > On 9 November 2015 at 12:00, Curtis Hamilton <hamiltcl@verizon.net> wrote: >> Has anyone else tried to load the BWI module in 10.2? I attempted to >> load the kernel module and build a new kernel with the module >> built-in. In both cases the boot process freezes with the following > errors: >> >> >> >> ata2: <ATA channel > at channel0 on atapci0 >> >> ata2: WARNING DMA initialization failed, disabling DMA >> >> ata2: FAILURE - alloc sg_map >> >> ata2: WARNING DMA allocation failed, disabling DMA >> >> >> >> A few lines before this the following error is shown: >> >> >> >> bwi0: can't allocate DMA mem >> >> bwi0: 0th TX ring DMA alloc-failed >> >> >> >> Everything works fine in 10.1 >> >> _______________________________________________ >> freebsd-ppc@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-ppc >> To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@freebsd.org" > [-- Attachment #2 --] Copyright (c) 1992-2015 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.2-STABLE #0 r287149: Thu Aug 27 03:46:55 UTC 2015 root@releng1.nyi.freebsd.org:/usr/obj/powerpc.powerpc64/usr/src/sys/GENERIC64 powerpc gcc version 4.2.1 20070831 patched [FreeBSD] VT(ofwfb): resolution 1680x1050 cpu0: IBM PowerPC 970MP revision 1.1, 2300.29 MHz cpu0: Features dc000000<PPC32,PPC64,ALTIVEC,FPU,MMU> cpu0: HID0 1511081<DEEPNAP,NAP,DPM,NHR,TBEN,ENATTN> real memory = 5878026240 (5605 MB) avail memory = 5531877376 (5275 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0: dev=ff89d680 (BSP) cpu1: dev=ff89eb70 kbd0 at kbdmux0 random: <Software, Yarrow> initialized ofwbus0: <Open Firmware Device Tree> on nexus0 cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 pcr0: <PPC 970 Power Control Register> on cpu0 cpu1: <Open Firmware CPU> on cpulist0 pcr1: <PPC 970 Power Control Register> on cpu1 powermac_nvram0: <Apple NVRAM> mem 0xfff04000-0xfff07fff on ofwbus0 powermac_nvram0: bank0 generation 550, bank1 generation 551 unin0: <Apple UniNorth System Controller> mem 0xf8000000-0xf8ffffff on ofwbus0 unin0: Version 66 iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 0 on unin0 iicbus0: <OFW I2C bus> on iichb0 ds17750: <Temp-Monitor DS1775> at addr 0x94 on iicbus0 ds16310: <Temp-Monitor DS1631> at addr 0x96 on iicbus0 max66900: <Temp-Monitor MAX6690> at addr 0x98 on iicbus0 max66901: <Temp-Monitor MAX6690> at addr 0x9c on iicbus0 htpic0: <OpenPIC Interrupt Controller> mem 0xf8040000-0xf807ffff on unin0 pcib0: <IBM CPC945 PCI Express Root> mem 0xf0000000-0xf1ffffff on ofwbus0 pci0: <OFW PCI bus> on pcib0 vgapci0: <VGA-compatible display> mem 0x92000000-0x92ffffff,0xa0000000-0xbfffffff,0x91000000-0x91ffffff irq 3 at device 0.0 on pci0 vgapci0: Boot video device pcib1: <IBM CPC9X5 HyperTransport Tunnel> mem 0xf2000000-0xf47fffff,0xf8070000-0xf8070fff on ofwbus0 pcib1: 86 HT IRQs on device 7.0 pci1: <OFW PCI bus> on pcib1 pcib1: Enabling MSI window for HyperTransport slave at pci1:0:1:0 pcib2: <OFW PCI-PCI bridge> at device 1.0 on pci1 pci2: <OFW PCI bus> on pcib2 pcib3: <OFW PCI-PCI bridge> at device 2.0 on pci1 pci3: <OFW PCI bus> on pcib3 bge0: <Broadcom BCM5714 B3, ASIC rev. 0x008003> mem 0xfa530000-0xfa53ffff,0xfa520000-0xfa52ffff irq 66 at device 4.0 on pci3 bge0: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X 33 MHz miibus0: <MII bus> on bge0 brgphy0: <BCM5780 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: 00:16:cb:3a:88:88 bge1: <Broadcom BCM5714 B3, ASIC rev. 0x008003> mem 0xfa510000-0xfa51ffff,0xfa500000-0xfa50ffff irq 67 at device 4.1 on pci3 bge1: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X 33 MHz miibus1: <MII bus> on bge1 brgphy1: <BCM5780 1000BASE-T media interface> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Ethernet address: 00:16:cb:3a:88:89 pcib4: <OFW PCI-PCI bridge> at device 3.0 on pci1 pci4: <OFW PCI bus> on pcib4 pcib5: <OFW PCI-PCI bridge> at device 4.0 on pci1 pci5: <OFW PCI bus> on pcib5 pcib6: <OFW PCI-PCI bridge> at device 5.0 on pci1 pci6: <OFW PCI bus> on pcib6 pcib7: <OFW PCI-PCI bridge> at device 6.0 on pci1 pci7: <OFW PCI bus> on pcib7 pcib8: <OFW PCI-PCI bridge> at device 7.0 on pci1 pci8: <OFW PCI bus> on pcib8 gem0: <Apple Shasta GMAC Ethernet> mem 0xfa200000-0xfa3fffff at device 15.0 on pci8 gem0: invalid MAC address device_attach: gem0 attach returned 6 pcib9: <OFW PCI-PCI bridge> at device 8.0 on pci1 pci9: <OFW PCI bus> on pcib9 macio0: <Shasta I/O Controller> mem 0x80000000-0x8007ffff at device 7.0 on pci9 macgpio0: <MacIO GPIO Controller> mem 0x50-0x8a on macio0 scc0: <Zilog Z8530 dual channel SCC> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 23,17,18,24,19,20 on macio0 uart0: <z8530, channel A> on scc0 uart1: <z8530, channel B> on scc0 iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 27 on macio0 iicbus1: <OFW I2C bus> on iichb1 onyx0: <Texas Instruments PCM3052 Audio Codec> at addr 0x8c on iicbus1 iicbus1: <unknown card> at addr 0x24 pcm0: <Apple I2S Audio Controller> mem 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 28,11,12,30,15,16 on macio0 pci9: <network> at device 1.0 (no driver attached) ohci0: <NEC uPD 9210 USB controller> mem 0x80082000-0x80082fff irq 70 at device 11.0 on pci9 usbus0 on ohci0 ohci1: <NEC uPD 9210 USB controller> mem 0x80081000-0x80081fff irq 70 at device 11.1 on pci9 usbus1 on ohci1 ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0x80080000-0x800800ff irq 70 at device 11.2 on pci9 usbus2: EHCI version 1.0 usbus2 on ehci0 pcib10: <OFW PCI-PCI bridge> at device 9.0 on pci1 pci10: <OFW PCI bus> on pcib10 atapci0: <ServerWorks K2 SATA150 controller> mem 0xfa402000-0xfa403fff irq 10 at device 12.0 on pci10 pcib1: failed to reserve resource for pcib10 atapci0: 0x10 bytes of rid 0x20 res 4 failed (0, 0xffffffffffffffff). ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 ata4: <ATA channel> at channel 2 on atapci0 ata5: <ATA channel> at channel 3 on atapci0 ata0: <Shasta Kauai ATA Controller> mem 0xfa404000-0xfa407fff irq 38,37 at device 13.0 on pci10 fwohci0: <1394 Open Host Controller Interface> mem 0xfa400000-0xfa400fff irq 39 at device 14.0 on pci10 fwohci0: OHCI version 1.0 (ROM=0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:14:51:ff:fe:41:47:5a fwohci0: invalid speed 7 (fixed to 3). fwohci0: Phy 1394a available S800, 3 ports. fwohci0: Link S800, max_rec 4096 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:14:51:41:47:5a fwe0: Ethernet address: 02:14:51:41:47:5a sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000002, SelfID Count=1, CYCLEMASTER mode smu0: <Apple System Management Unit> on ofwbus0 iichb2: <SMU I2C controller> on smu0 iicbus2: <OFW I2C bus> on iichb2 smusat0: <SMU Satellite Sensors> at addr 0xb0 on iicbus2 iicbus2: <unknown card> at addr 0xd4 iichb3: <SMU I2C controller> on smu0 iicbus3: <OFW I2C bus> on iichb3 Timecounter "timebase" frequency 33333333 Hz quality 0 Event timer "decrementer" frequency 33333333 Hz quality 1000 Timecounters tick every 1.000 msec firewire0: 3 nodes, maxhop <= 2 cable IRM irm(2) (me) firewire0: bus manager 2 max66900: 2 sensors detected. max66901: 2 sensors detected. random: unblocking device. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 ugen0.1: <NEC> at usbus0 uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <NEC> at usbus1 uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 usbus2: 480Mbps High Speed USB v2.0 ugen2.1: <NEC> at usbus2 uhub2: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub0: 3 ports with 3 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 5 ports with 5 removable, self powered ada0 at ata2 bus 0 scbus0 target 0 lun 0 ada0: <ST31000524AS JC4B> ATA8-ACS SATA 3.x device ada0: Serial Number 9VP6KXTM ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad0 ada1 at ata3 bus 0 scbus1 target 0 lun 0 ada1: <ST3500630NS Q 3.BTJ> ATA-7 SATA 2.x device ada1: Serial Number 9QG9QKH4 ada1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada1: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) ada1: Previously was known as ad1 cd0 at ata0 bus 0 scbus4 target 0 lun 0 cd0: <HL-DT-ST DVD-RW GWA-4165B Q002> Removable CD-ROM SCSI device cd0: Serial Number M0064S32313 cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes) cd0: cd present [1100623 x 2048 byte records] SMP: AP CPU #1 launched ugen2.2: <Hewlett Packard> at usbus2 umass0: <SCSI Over USB> on usbus2 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:6:0:-1: Attached to scbus6 sa0 at umass-sim0 bus 0 scbus6 target 0 lun 0 sa0: <HP C7438A ZU8B> Removable Sequential Access SCSI-3 device sa0: Serial Number 48553108084D3639 sa0: 40.000MB/s transfers ugen2.3: <vendor 0x05ac> at usbus2 uhub3: <vendor 0x05ac product 0x9130, class 9/0, rev 2.00/1.01, addr 3> on usbus2 uhub3: MTT enabled uhub3: 3 ports with 2 removable, self powered ugen2.4: <Mitsumi Electric> at usbus2 uhub4: <Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/4.00, addr 4> on usbus2 uhub4: 3 ports with 2 removable, bus powered ugen2.5: <Mitsumi Electric> at usbus2 ukbd0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/4.00, addr 5> on usbus2 kbd1 at ukbd0 uhid0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/4.00, addr 5> on usbus2 ugen2.6: <vendor 0x05ac> at usbus2 hid_get_item: Number of items truncated to 255 hid_get_item: Number of items truncated to 255 uhid1: <vendor 0x05ac product 0x9222, class 0/0, rev 1.10/1.14, addr 6> on usbus2 hid_get_item: Number of items truncated to 255 hid_get_item: Number of items truncated to 255 hid_get_item: Number of items truncated to 255 Root mount waiting for: usbus2 ugen2.7: <Primax Electronics> at usbus2 ums0: <Primax Electronics Apple Optical USB Mouse, class 0/0, rev 1.10/1.10, addr 7> on usbus2 ums0: 4 buttons and [XYZW] coordinates ID=0 Trying to mount root from ufs:/dev/ada0s3 [rw]... ugen0.2: <vendor 0x05ac> at usbus0 ukbd1: <vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr 2> on usbus0 kbd2 at ukbd1 ums1: <vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr 2> on usbus0 ums1: 5 buttons and [XY] coordinates ID=0 pid 1258 (firefox), uid 0: exited on signal 11 (core dumped) (sa0:umass-sim0:0:0:0): REWIND. CDB: 01 00 00 00 00 00 (sa0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (sa0:umass-sim0:0:0:0): Retrying command (sa0:umass-sim0:0:0:0): REWIND. CDB: 01 00 00 00 00 00 (sa0:umass-sim0:0:0:0): CAM status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI status: Check Condition (sa0:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:29,2 (SCSI bus reset occurred) (sa0:umass-sim0:0:0:0): Retrying command (per sense data) (sa0:umass-sim0:0:0:0): SPACE(6). CDB: 11 00 00 26 46 00 (sa0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (sa0:umass-sim0:0:0:0): Error 5, Retries exhausted pid 95271 (about-gui), uid 0: exited on signal 11 (core dumped) pid 95299 (pc-usermanager), uid 0: exited on signal 11 (core dumped) pid 95310 (pc-sysinstaller), uid 0: exited on signal 11 (core dumped) pid 95303 (pc-sysinstaller), uid 0: exited on signal 11 (core dumped) pid 95573 (pc-servicemanager), uid 0: exited on signal 11 (core dumped) pid 6075 (python2.7), uid 0: exited on signal 11 (core dumped) pid 1503 (firefox), uid 0: exited on signal 6 (core dumped)help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?00aa01d11c25$5b095140$111bf3c0$>