Date: Sat, 25 Jan 2003 15:14:43 +0100 From: Dan Johansson <djodv97@student.vxu.se> To: freebsd-stable@freebsd.org Subject: System hangs stable Jan 22 Message-ID: <3E329BD3.1060500@student.vxu.se>
next in thread | raw e-mail | index | archive | help
Hi !
Yesterday my system froze twice during build of the lyx port over nfs. I
was unable to do anything to restore the system but to turn off the
power. Building lyx using local ports dir succeded. So I guess there is
something wrong with nfs ? The nfs server is on a 4.7-release system.
My computer is a dell inspiron 7500. If you want more info tell me what
to get.
firebat# uname -a
FreeBSD firebat.foo.bar 4.7-STABLE FreeBSD 4.7-STABLE #1: Thu Jan 23
14:51:36 CET 2003
wrang@firebat.foo.bar:/usr/obj/usr/src/sys/firebat i386
The stable was cvsup'ed on Jan 22 2003.
firebat# df -h
Filesystem Size Used Avail Capacity Mounted on
/dev/ad0s2a 126M 46M 70M 39% /
/dev/ad0s2f 252M 1.3M 231M 1% /tmp
/dev/ad0s2g 1.7G 1.3G 306M 81% /usr
/dev/ad0s2e 252M 9.3M 222M 4% /var
procfs 4.0K 4.0K 0B 100% /proc
dragon:/usr/ports 3.1G 2.1G 763M 74% /usr/ports
firebat# ifconfig xe0
xe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::210:a4ff:feb5:4917%xe0 prefixlen 64 scopeid 0x3
inet 192.168.1.5 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:10:a4:b5:49:17
media: Ethernet autoselect (100baseTX)
dmesg:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-STABLE #1: Thu Jan 23 14:51:36 CET 2003
wrang@firebat.foo.bar:/usr/obj/usr/src/sys/firebat
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (501.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 134152192 (131008K bytes)
config> di sn0
No such device: sn0
Invalid command or syntax. Type `?' for help.
config> di lnc0
No such device: lnc0
Invalid command or syntax. Type `?' for help.
config> di ie0
No such device: ie0
Invalid command or syntax. Type `?' for help.
config> di fe0
No such device: fe0
Invalid command or syntax. Type `?' for help.
config> di ed0
No such device: ed0
Invalid command or syntax. Type `?' for help.
config> di cs0
No such device: cs0
Invalid command or syntax. Type `?' for help.
config> di bt0
No such device: bt0
Invalid command or syntax. Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax. Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax. Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax. Type `?' for help.
config> q
avail memory = 126787584 (123816K bytes)
Preloaded elf kernel "kernel" at 0xc03b5000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03b509c.
netsmb_dev: loaded
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdf50
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem
0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 11
pci_cfgintr_linked: linked (60) to hard-routed irq 11
pci_cfgintr: 0:4 INTA routed to irq 11
pcic0: <TI PCI-1225 PCI-CardBus Bridge> irq 11 at device 4.0 on pci0
pcic0: PCI Memory allocated: 0x88000000
pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr
save][FUNC pci int + CSC serial isa irq]
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pci_cfgintr_linked: linked (60) to hard-routed irq 11
pci_cfgintr: 0:4 INTA routed to irq 11
pcic1: <TI PCI-1225 PCI-CardBus Bridge> irq 11 at device 4.1 on pci0
pcic1: PCI Memory allocated: 0x88001000
pcic1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr
save][FUNC pci int + CSC serial isa irq]
pccard1: <PC Card 16-bit bus (classic)> on pcic1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq
5 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip0: <Intel 82371AB Power management controller> port 0x1040-0x104f at
device 7.3 on pci0
pcm0: <ESS Technology Maestro-2E> port 0x1400-0x14ff irq 5 at device 8.0
on pci0
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pccard: card inserted, slot 0
pccard: card removed, slot 0
ad0: 6194MB <IBM-DBCA-206480> [13424/15/63] at ata0-master UDMA33
acd0: CDROM <TOSHIBA CD-ROM XM-1902B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
pccard: card inserted, slot 0
xe0 at port 0x240-0x24f iomem 0xd1000-0xd1fff irq 11 slot 0 on pccard0
xe0: Xircom CE3, bonding version 0x45, 100Mbps capable
xe0: DingoID = 0x444b, RevisionID = 0x1, VendorID = 0
xe0: Ethernet address 00:10:a4:b5:49:17
module_register: module pccard/xe already exists!
linker_file_sysinit "if_xe.ko" failed to register! 17
xe0: watchdog timeout; resetting card
/Dan
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E329BD3.1060500>