Date: Mon, 25 Feb 2002 09:44:09 +0100 (CET) From: Christoph Kukulies <kuku@gilberto.physik.RWTH-Aachen.DE> To: freebsd-mobile@freebsd.org Subject: wi0 not found/installed Message-ID: <200202250844.g1P8i9G88374@gilberto.physik.RWTH-Aachen.DE>
next in thread | raw e-mail | index | archive | help
With stock 4.4 I was able to use the wireless lan card (wi0).
Then I cvsuped -current three or four weeks ago and was lost with
wi0 no longer working.
I'm supplying a dmesg output of boot -v and my kernel config file
hoping that someone can help me getting a working wi0 again.
Thanks.
--
Chris Christoph P. U. Kukulies kuku@gil.physik.rwth-aachen.de
dmesg output:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Mon Feb 25 09:15:53 GMT 2002
root@:/usr/src/sys/i386/compile/KUKUBOOKNEW
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0408000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04080b4.
Calibrating clock(s) ... TSC clock: 996644211 Hz, i8254 clock: 1193143 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
TSC initialization skipped: APM enabled.
CPU: Pentium III/Pentium III Xeon/Celeron (996.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268345344 (262056K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0042f000 - 0x0ffe1fff, 263925760 bytes (64435 pages)
avail memory = 256868352 (250848K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xc06e
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4 Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fac4
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=11308086)
Using $PIR table, 10 entries at 0xc00fbc20
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: Other PM system enabled.
pcib0: <Intel 82815 (i815 GMCH) Host To Hub bridge> at pcibus 0 on motherboard
pci0: physical bus=0
map[10]: type 3, range 32, base e8000000, size 26, enabled
found-> vendor=0x8086, dev=0x1130, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
found-> vendor=0x8086, dev=0x1131, revid=0x02
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x8086, dev=0x2448, revid=0x03
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x8086, dev=0x244c, revid=0x03
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base 0000bfa0, size 4, enabled
found-> vendor=0x8086, dev=0x244a, revid=0x03
bus=0, slot=31, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
map[20]: type 4, range 32, base 0000bce0, size 5, enabled
found-> vendor=0x8086, dev=0x2442, revid=0x03
bus=0, slot=31, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=11
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xc000-0xcfff
pcib1: memory decode 0xfc000000-0xfdffffff
pcib1: prefetched decode 0xe0000000-0xe7ffffff
pci1: physical bus=1
map[10]: type 1, range 32, base fc000000, size 24, enabled
map[14]: type 3, range 32, base e0000000, size 27, enabled
found-> vendor=0x10de, dev=0x0112, revid=0xb2
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 16
pcib2: I/O decode 0xd000-0xffff
pcib2: memory decode 0xf2000000-0xfbffffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci2: physical bus=2
map[10]: type 4, range 32, base 0000dc00, size 8, enabled
map[14]: type 1, range 32, base f6ffe000, size 13, enabled
found-> vendor=0x125d, dev=0x1998, revid=0x10
bus=2, slot=3, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x1668, dev=0x0100, revid=0x11
bus=2, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x104c, dev=0xac42, revid=0x00
bus=2, slot=15, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x104c, dev=0xac42, revid=0x00
bus=2, slot=15, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base f6ffd800, size 11, enabled
map[14]: type 1, range 32, base f6ff8000, size 14, enabled
found-> vendor=0x104c, dev=0x8027, revid=0x00
bus=2, slot=15, func=2
class=0c-00-10, hdrtype=0x00, mfdev=1
intpin=a, irq=11
powerspec 2 supports D0 D2 D3 current D0
pci2: <PCI bus> on pcib2
pci2: <multimedia, audio> at device 3.0 (no driver attached)
pcib3: <PCI-PCI bridge> at device 6.0 on pci2
pcib3: secondary bus 8
pcib3: subordinate bus 8
pcib3: I/O decode 0xe000-0xefff
pcib3: memory decode 0xf8000000-0xf9ffffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci3: physical bus=8
map[10]: type 1, range 32, base f8fff000, size 12, enabled
map[14]: type 4, range 32, base 0000ecc0, size 6, enabled
map[18]: type 1, range 32, base f8e00000, size 20, enabled
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=8, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base f8ffec00, size 8, enabled
map[14]: type 4, range 32, base 0000ecb8, size 3, enabled
map[18]: type 4, range 32, base 0000e800, size 8, enabled
found-> vendor=0x11c1, dev=0x0448, revid=0x01
bus=8, slot=8, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 2 supports D0 D2 D3 current D0
pci3: <PCI bus> on pcib3
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xecc0-0xecff mem 0xf8e00000-0xf8efffff,0xf8fff000-0xf8ffffff irq 11 at device 4.0 on pci3
pcib3: device fxp0 requested decoded memory range 0xf8fff000-0xf8ffffff
pcib2: device fxp0 requested decoded memory range 0xf8fff000-0xf8ffffff
fxp0: using memory space register mapping
fxp0: Ethernet address 00:20:e0:69:17:62
fxp0: PCI IDs: 8086 1229 1668 1100 0008
fxp0: Dynamic Standby mode is disabled
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
pci3: <simple comms> at device 8.0 (no driver attached)
pcic0: <TI PCI-4451 PCI-CardBus Bridge> irq 11 at device 15.0 on pci2
pcib2: device pcic0 requested decoded memory range 0xf2000000-0xfbffffff
pcic0: PCI Memory allocated: 0xf2000000
pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][CSC serial isa irq]
pcic0: PCI Configuration space:
0x00: 0xac42104c 0x02100007 0x06070000 0x00822008
0x10: 0xf2000000 0x020000a0 0x20000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x07e0010b
0x40: 0x00a41028 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x3024d020 0x00000600 0x000f0000 0x05033002
0x90: 0x606482c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <TI PCI-4451 PCI-CardBus Bridge> irq 11 at device 15.1 on pci2
pcib2: device pcic1 requested decoded memory range 0xf2000000-0xfbffffff
pcic1: PCI Memory allocated: 0xf2001000
pcic1: TI12XX PCI Config Reg: [ring enable][speaker enable][CSC serial isa irq]
pcic1: PCI Configuration space:
0x00: 0xac42104c 0x02100007 0x06070000 0x00822008
0x10: 0xf2001000 0x020000a0 0x20000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x07e0010b
0x40: 0x00a41028 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x3024d020 0x00000600 0x000f0080 0x05033002
0x90: 0x606483c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pccard1: <PC Card bus (classic)> on pcic1
pci2: <serial bus, FireWire> at device 15.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xbfa0-0xbfaf at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xbfa0
ata0: mask=03 ostat0=50 ostat2=50
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 14 eb
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=09
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xbfa8
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xbce0-0xbcff irq 11 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
pcic: pcic0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xcf800-0xcffff,0xcf000-0xcf7ff,0xce800-0xcefff,0xce000-0xce7ff,0xcd800-0xcdfff,0xcd000-0xcd7ff,0xc0000-0xccfff on isa0
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
adv0 failed to probe on isa0
bt0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 5c 9d
0b b2 00 6f 0d 0e 00 00 06 90 08 89 8f 28 1f 08
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 5c 9d
0b b2 00 6f 0d 0e 00 00 06 90 08 89 8f 28 1f 08
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vt0 failed to probe on isa0
pmtimer0 on isa0
sio0: irq maps: 0xa01 0xa11 0xa01 0xa01
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0xa01 0xa01 0xa01 0xa01
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ed0 failed to probe at port 0x280 iomem 0xd8000 irq 10 on isa0
cs0 failed to probe at port 0x300 on isa0
sn0 failed to probe at port 0x300 irq 10 on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
fe0 failed to probe at port 0x300 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
procfs registered
bpf: lo0 attached
bpf: ppp0 attached
pcic1: Event mask 0xf
ad0: success setting UDMA5 on Intel chip
Creating DISK ad0
ad0: <IC25N030ATDA04-0/DA4OA70A> ATA-5 disk at ata0-master
ad0: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ata0-slave: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata0-slave: success setting PIO4 on generic chip
acd0: <LG DVD-ROM DRN-8080B/1.13> DVD-ROM drive at ata0 as slave
acd0: 512KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0xc, start 610470, end = 41046074, size 40435605 : OK
ad0s2: type 0xa5, start 63, end = 112454, size 112392 : OK
ad0s3: type 0xa5, start 41046075, end = 49849694, size 8803620 : OK
ad0s4: type 0x85, start 49849695, end = 58605119, size 8755425 : OK
start_init: trying /sbin/init
pcic1: Autodetected 5.0V card
pccard: card inserted, slot 1
pcic1: reset 1 int is 10 stat is 4f
pccard: card removed, slot 1
pcic1: reset 1 int is 10 stat is 4f
pcic1: Autodetected 5.0V card
pccard: card inserted, slot 1
pcic1: reset 2 int is 70 stat is 4f
pcic1: reset 3 int is 70 stat is 4f
pcic1: reset 0
kernel config file:
-------------------
#
# NEWCARD -- efforts at porting newconfig pccard/cardbus code to newbus
#
# This is a new implementation of pccard and cardbus support. It works
# for many folks right now. Some folks still have issues. The support
# around the edges isn't as complete as the previous pccard system.
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the NOTES configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in NOTES.
#
# $FreeBSD: src/sys/i386/conf/NEWCARD,v 1.59 2002/01/15 06:43:59 imp Exp $
machine i386
cpu I686_CPU
ident KUKUBOOKNEW
maxusers 0
#To statically compile in device wiring instead of /boot/device.hints
hints "KUKUBOOKNEW.hints" #Default places to look for devices.
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options COMPAT_OLDISA
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
options UFS_DIRHASH #Improve performance on big directories
options MD_ROOT #MD is a potential root device
options NFSCLIENT #Network Filesystem Client
options NFSSERVER #Network Filesystem Server
options NFS_ROOT #NFS usable as root device, requires NFSCLIENT
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem (requires PSEUDOFS)
options PSEUDOFS #Pseudo-filesystem framework
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
#options USERCONFIG #boot -c editor
#options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
# Debugging for use in -current
options DDB #Enable the kernel debugger
options INVARIANTS #Enable calls of extra sanity checking
options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS
options WITNESS #Enable mutex checks to detects deadlocks and cycles
device isa
device eisa
device pci
options PCI_ENABLE_IO_MODES # Enable pci resources left off by a "lazy BIOS"
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc 1 # At keyboard controller
device atkbd # at keyboard
device psm # psm mouse
device vga # VGA screen
# splash screen/screen saver
device splash
# syscons is the default console driver, resembling an SCO console
device sc 1
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
device apm
# Add suspend/resume support for the i8254.
device pmtimer
# Pcmcia and cardbus bridge support
#device pccbb # cardbus (yenta) bridge
#device pccard
#device cardbus
# PCCARD (PCMCIA) support
device card # pccard bus
device pcic # PCMCIA bridge
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
# ISA Ethernet NICs. pccard nics included.
# Wireless NIC cards
device wi # WaveLAN/IEEE 802.11 wireless NICs.
# Pseudo devices - the number indicates how many units to allocate.
device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
device sl # Kernel SLIP
device ppp 1 # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device ums # Mouse
device urio # Diamond Rio 500 MP3 player
device uscanner # Scanners
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200202250844.g1P8i9G88374>