Date: Wed, 20 Sep 2000 11:54:53 +0200 (CEST) From: Cyrille Lefevre <root@gits.dyndns.org> To: "Scot W. Hetzel" <hetzels@westbend.net> Cc: freebsd-stable@FreeBSD.ORG Subject: Re: TRAP FAULT 12 and calcru: monotonisation Message-ID: <200009200954.e8K9ss032370@gits.dyndns.org> In-Reply-To: <010701c022b9$9c4f22e0$8dfee0d1@westbend.net> "from Scot W. Hetzel at Sep 19, 2000 11:16:50 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
--ELM969443693-31571-0_
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=US-ASCII
Scot W. Hetzel wrote:
> From: "Cyrille Lefevre" <root@gits.dyndns.org>
> > is there a way to go back to 4.1-RC while the TAG have been removed ?
>
> Yes, there is a way to go back to 4.1-RC, you just have to specify the date on the cvs command line.
>
> cvs update -D "07-14-2000 00:03:00 UTC"
[snip]
> > I guess it's not possible to select a snapshot by date combined to
> > the tag RELENG_4, isn't it ? as I understood cvs it's only possible
> > to select a snapshot only by tag or by date in -current :(
>
> RELENG_4 is the name of the branch, so when you specify RELENG_4 you get the head of that branch. If you also specify a date, then
> you get RELENG_4 for that date.
thanks, I'll try. but as I remember me, I've try to specified both
-r RELENG_4 and -D some date in the past w/o success. and -D alone
would refer to -current and remove the RELENG_4 tag in CVS/{Entries,Tag}.
for instance, I'm running the GENERIC kernel w/o crash for a few hours
while my CUSTOM kernel crash in less than one hour !
this allow me to do a cvsup and to build a new kernel. things which where
not possible w/ my CUSTOM kernel while I don't made any change for months.
I'll try it this evening.
in attachement, you'll find two dmesg (GENERIC and CUSTOM),
my CUSTOM kernel configuration and the last backtrace.
Cyrille.
--
home: mailto:clefevre@citeweb.net work: mailto:Cyrille.Lefevre@edf.fr
--ELM969443693-31571-0_
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=ISO-8859-1
Content-Disposition: attachment; filename=dmesg.GENERIC
Content-Description: dmesg.GENERIC
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-STABLE #1: Mon Sep 18 10:12:11 CEST 2000
root@gits:/disk2/4.0-stable/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (165.79-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping = 12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 134217728 (131072K bytes)
avail memory = 126382080 (123420K bytes)
Preloaded elf kernel "kernel.GENERIC" at 0xc0438000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371FB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX ATA controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ncr0: <ncr 53c875 fast20 wide scsi> port 0xfc00-0xfcff mem 0xffbea000-0xffbeafff,0xffbebc00-0xffbebcff irq 9 at device 14.0 on pci0
pci0: <unknown card> (vendor=0x109e, dev=0x036e) at 15.0 irq 5
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 15.1 irq 5
pci0: <Matrox MGA Millennium 2064W graphics accelerator> at 16.0 irq 11
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port not found.
ep0: <3Com 3C509B-Combo EtherLink III (PnP)> at port 0x210-0x21f irq 7 on isa0
ep0: Ethernet address 00:60:08:1a:9a:37
ad0: 9543MB <Maxtor 91000D8> [19390/16/63] at ata0-master using WDMA2
ad1: 39082MB <Maxtor 54098U8> [79406/16/63] at ata0-slave using WDMA2
ad2: 9543MB <Maxtor 91000D8> [19390/16/63] at ata1-master using WDMA2
ad3: 19531MB <Maxtor 92048D8> [39683/16/63] at ata1-slave using WDMA2
Waiting 15 seconds for SCSI devices to settle
sa0 at ncr0 bus 0 target 3 lun 0
sa0: <HP C1533A HP00> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 8)
da3 at ncr0 bus 0 target 6 lun 0
da3: <HP C3325A HP08> Fixed Direct Access SCSI-2 device
da3: 10.000MB/s transfers (10.000MHz, offset 16), Tagged Queueing Enabled
da3: 2048MB (4194685 512 byte sectors: 255H 63S/T 261C)
da2 at ncr0 bus 0 target 5 lun 0
da2: <HP C3325A HP08> Fixed Direct Access SCSI-2 device
da2: 10.000MB/s transfers (10.000MHz, offset 16), Tagged Queueing Enabled
da2: 2048MB (4194685 512 byte sectors: 255H 63S/T 261C)
da1 at ncr0 bus 0 target 4 lun 0
da1: <SEAGATE ST32430N HP04> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da1: 2048MB (4194685 512 byte sectors: 255H 63S/T 261C)
da0 at ncr0 bus 0 target 0 lun 0
da0: <HP C3325A HP08> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 16), Tagged Queueing Enabled
da0: 2048MB (4194685 512 byte sectors: 255H 63S/T 261C)
Mounting root from ufs:/dev/da0s1a
cd0 at ncr0 bus 0 target 1 lun 0
cd0: <PLEXTOR CD-ROM PX-32TS 1.03> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ncr0 bus 0 target 2 lun 0
cd1: <YAMAHA CRW4260 1.0q> Removable CD-ROM SCSI-2 device
cd1: 3.300MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed
WARNING: / was not properly dismounted
--ELM969443693-31571-0_
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=ISO-8859-1
Content-Disposition: attachment; filename=dmesg.CUSTOM
Content-Description: dmesg.CUSTOM
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-STABLE #1: Mon Sep 18 10:45:16 CEST 2000
root@gits:/disk2/4.0-stable/src/sys/compile/CUSTOM
Timecounter "i8254" frequency 1193204 Hz
CPU: Pentium/P54C (165.79-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping = 12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 134217728 (131072K bytes)
avail memory = 126808064 (123836K bytes)
Preloaded elf kernel "kernel" at 0xc03c3000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03c309c.
Preloaded elf module "splash_bmp.ko" at 0xc03c30ec.
Preloaded elf module "vesa.ko" at 0xc03c3190.
Preloaded splash_image_data "/boot/splash/daemon_640.bmp" at 0xc03c322c.
Intel Pentium detected, installing workaround for F00F bug
VESA: v2.0, 4096k memory, flags:0x1, mode table:0xc0374a02 (1000022)
VESA: Matrox Graphics Inc.
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371FB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX ATA controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
sym0: <875> port 0xfc00-0xfcff mem 0xffbea000-0xffbeafff,0xffbebc00-0xffbebcff irq 9 at device 14.0 on pci0
sym0: Tekram NVRAM, ID 7, Fast-20, SE, parity checking
bktr0: <BrookTree 878> mem 0xfffbe000-0xfffbefff irq 5 at device 15.0 on pci0
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
smbus0: <System Management Bus> on bti2c0
bktr0: Hauppauge Model 61326 D109
bktr0: Detected a MSP3410D-B4 at 0x80
bktr0: Hauppauge WinCast/TV, Philips SECAM tuner, msp3400c stereo, remote control.
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 15.1 irq 5
pci0: <Matrox MGA Millennium 2064W graphics accelerator> at 16.0 irq 11
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <8 virtual consoles, flags=0x200>
joy0 at port 0x201 on isa0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x20010 on isa0
sio0: type ST16650A
sio1 at port 0x2f8-0x2ff irq 3 flags 0x20000 on isa0
sio1: type ST16650A
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pca0 at port 0x40 on isa0
sbc0: <Creative ViBRA16X> at port 0x220-0x22f,0x300-0x301,0x388-0x38b irq 7 drq 0,1 on isa0
sbc0: setting card to irq 7, drq 0, 1
pcm0: <SB DSP 4.16 (ViBRA16X)> on sbc0
joy1: <Generic PnP Joystick> at port 0x200 on isa0
ep0: <3Com 3C509B-Combo EtherLink III (PnP)> at port 0x210-0x21f irq 10 on isa0
ep0: Ethernet address 00:60:08:1a:9a:37
unknown: <PNP0000> can't assign resources
pca1: <AT-style speaker sound> at port 0x61 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0400> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, unlimited logging
IPv6 packet filtering initialized, unlimited logging
ad0: 9543MB <Maxtor 91000D8> [19390/16/63] at ata0-master using WDMA2
ad1: 39082MB <Maxtor 54098U8> [79406/16/63] at ata0-slave using WDMA2
ad2: 9543MB <Maxtor 91000D8> [19390/16/63] at ata1-master using WDMA2
ad3: 19531MB <Maxtor 92048D8> [39683/16/63] at ata1-slave using WDMA2
Waiting 5 seconds for SCSI devices to settle
(probe2:sym0:0:2:0): phase change 6-7 6@07d8798c resid=4.
sa0 at sym0 bus 0 target 3 lun 0
sa0: <HP C1533A HP00> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 8)
da0 at sym0 bus 0 target 0 lun 0
da0: <HP C3325A HP08> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 16), Tagged Queueing Enabled
da0: 2048MB (4194685 512 byte sectors: 255H 63S/T 261C)
da2 at sym0 bus 0 target 5 lun 0
da2: <HP C3325A HP08> Fixed Direct Access SCSI-2 device
da2: 10.000MB/s transfers (10.000MHz, offset 16), Tagged Queueing Enabled
da2: 2048MB (4194685 512 byte sectors: 255H 63S/T 261C)
da3 at sym0 bus 0 target 6 lun 0
da3: <HP C3325A HP08> Fixed Direct Access SCSI-2 device
da3: 10.000MB/s transfers (10.000MHz, offset 16), Tagged Queueing Enabled
da3: 2048MB (4194685 512 byte sectors: 255H 63S/T 261C)
da1 at sym0 bus 0 target 4 lun 0
da1: <SEAGATE ST32430N HP04> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da1: 2048MB (4194685 512 byte sectors: 255H 63S/T 261C)
Mounting root from ufs:/dev/da0s1a
cd0 at sym0 bus 0 target 1 lun 0
cd0: <PLEXTOR CD-ROM PX-32TS 1.03> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY,
cd1 at sym0 bus 0 target 2 lun 0
cd1: <YAMAHA CRW4260 1.0q> Removable CD-ROM SCSI-2 device
cd1: 3.300MB/s transfers
cd1: Attempt to query device size failed: NOT READY,
WARNING: / was not properly dismounted
reboot after panic: calcru: monotonisation botch 2
writing core to /var/crash/vmcore.17
writing kernel to /var/crash/kernel.17
--ELM969443693-31571-0_
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=ISO-8859-1
Content-Disposition: attachment; filename=CUSTOM
Content-Description: CUSTOM
# $Id: CUSTOM 4.0 clefevre@citeweb.net Fri Jun 9 01:01:52 CEST 2000 $
#
# CUSTOM -- Gataway 2000 P5-166's Cyrille Lefevre
#
machine i386
cpu I586_CPU # aka Pentium
ident CUSTOM
maxusers 32
# === OPTIONS ===
# --- cpu ---
options PQ_LARGECACHE
options CLK_USE_I8254_CALIBRATION
options CLK_USE_TSC_CALIBRATION
#options MATH_EMULATE # mod: fpu
#options GPL_MATH_EMULATE # mod: gnufpu
# --- config ---
options USERCONFIG
options VISUAL_USERCONFIG
# strings -n 3 /kernel | sed -n 's/^___//p'
options INCLUDE_CONFIG_FILE
# --- compat ---
options COMPAT_43
options USER_LDT
options UCONSOLE
options SYSVSHM
options SYSVSEM
options SYSVMSG
# --- emul ---
#options COMPAT_LINUX # mod: linux
#options COMPAT_SVR4 # mod: svr4
#pseudo-device streams # mod: streams
#options IBCS2 # mod: ibcs2 ibcs2_coff
# --- posix ---
options P1003_1B
options _KPOSIX_PRIORITY_SCHEDULING
# --- debug ---
options DDB
#options DDB_UNATTENDED
options KTRACE
options INVARIANTS
options INVARIANT_SUPPORT
options DIAGNOSTIC
#options PERFMON
# --- network ---
options INET
options INET6
#options IPSEC
#options IPSEC_ESP
#options IPSEC_IPV6FWD
#options NETGRAPH # mod: netgraph
#options TCP_COMPAT_42
#options MROUTING # mod: ip_mroute
options IPFIREWALL # mod: ipfw req: DUMMYNET
options IPFIREWALL_VERBOSE # mod: ipfw
#options IPFIREWALL_VERBOSE_LIMIT=100 # mod: ipfw
#options IPFIREWALL_DEFAULT_TO_ACCEPT # mod: ipfw
options IPFIREWALL_FORWARD # mod: ipfw
options IPV6FIREWALL
options IPV6FIREWALL_VERBOSE
#options IPV6FIREWALL_VERBOSE_LIMIT=100
#options IPV6FIREWALL_DEFAULT_TO_ACCEPT
options IPDIVERT
#options IPFILTER # mod: ipl
#options IPFILTER_LOG # mod: ipl
#options IPFILTER_DEFAULT_BLOCK # mod: ipl
options IPSTEALTH
options TCPDEBUG
options TCP_DROP_SYNFIN
options TCP_RESTRICT_RST
options ICMP_BANDLIM
#options DUMMYNET
#options BRIDGE
# --- filesystem ---
options FFS
options FFS_ROOT
options SOFTUPDATES
options QUOTA
options SUIDDIR
#options MFS # mod: mfs
#options MD_ROOT # mod: md
#pseudo-device md # mod: md
#options BOOTP
#options BOOTP_NFSROOT
#options BOOTP_NFSV3
#options BOOTP_COMPAT
##options BOOTP_WIRED_TO=ep0
#options NFS # mod: nfs
#options NFS_ROOT
#options CD9660 # mod: cd9660
#options CD9660_ROOT
#options CODA # mod: coda
#pseudo-device vcoda 4 # mod: coda
#options DEVFS
options EXT2FS
#options FDESC # mod: fdesc
#options KERNFS # mod: kernfs
##options KERNFS_DIAGNOSTIC
#options MSDOSFS # mod: msdos
#options NTFS # mod: ntfs
#options NWFS # mod: nwfs
#options NULLFS # mod: null
##options NULLFS_DIAGNOSTIC
#options PORTAL # mod: portal
#options PROCFS # mod: procfs
#options UMAPFS # mod: umap
##options UMAPFS_DIAGNOSTIC
#options UNION # mod: union
##options UNION_DIAGNOSTIC
# --- misc ---
options MSGBUF_SIZE=8192
options SHOW_BUSYBUFS
options NMBCLUSTERS=8192
# === ISA ===
device isa
options PNPBIOS
# --- power ---
device apm0 at nexus? # flags 0x20
# --- keyboard ---
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
options KBD_INSTALL_CDEV
# --- graphic ---
device vga0 at isa?
#options VESA # mod: vesa
# --- console ---
device sc0 at isa? # flags 0x6
options MAXCONS=8
#options SC_DISABLE_DDBKEY
#options SC_DISABLE_REBOOT
options SC_HISTORY_SIZE=250
# --- joystick ---
device joy0 at isa? port IO_GAME # mod: joy
# --- serial ---
device sio0 at isa? port IO_COM1 irq 4 flags 0x20010
device sio1 at isa? port IO_COM2 irq 3 flags 0x20000
# --- floppy ---
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
# --- parallel ---
device ppbus # req: lpt
device lpt # dep: ppbus req: ppc
device ppc0 at isa? disable irq 7
# --- sound ---
device pcm
device sbc # dep: pcm
# --- speaker ---
device pca0 at isa? port IO_TIMER1
# --- network ---
device ep
# --- mouse ---
device psm0 at atkbdc? irq 12
# --- fpu ---
device npx0 at nexus? port IO_NPX irq 13 # flags 0x0 iosiz 0x0
# --- atapi ---
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
# === PCI ===
device pci
#options PCI_QUIET
# --- video ---
device smbus # req: bktr
device intpm # dep: smbus
device iicbus # req: bktr
device iicbb # req: bktr dep: iicbus
device bktr # mod: bktr dep: smbus iicbus iicbb
# --- scsi ---
#device ahc
device sym
# --- atapi ---
device ata
# === SCSI ===
device scbus
options SCSI_DELAY=5000
options SCSI_NO_SENSE_STRINGS
options SCSI_NO_OP_STRINGS
options SES_ENABLE_PASSTHROUGH
device cd
#device ch
device da
device pass
#device scan
device ses
device pt
device sa
#device targ
# === ATAPI ===
options ATA_STATIC_ID
options ATA_ENABLE_ATAPI_DMA
device atadisk
device atapicd
#device atapifd
#device atapist
# === PSEUDOS ===
# --- network ---
pseudo-device bpf
#pseudo-device disc # mod: if_disc
pseudo-device ether
pseudo-device faith 1
pseudo-device gif 4
pseudo-device stf 1
pseudo-device loop
#pseudo-device ppp 2 # mod: if_ppp req: pppd
#options PPP_BSDCOMP # mod: if_ppp
#options PPP_DEFLATE # mod: if_ppp
#options PPP_FILTER # mod: if_ppp dep: bpf
#pseudo-device sl 2 # mod: if_sl
#pseudo-device tap
#pseudo-device tun # mod: if_tun req: ppp
# --- misc ---
#pseudo-device ccd 4 # mod: ccd
pseudo-device gzip
pseudo-device pty
pseudo-device snp 4
pseudo-device speaker
pseudo-device splash # req: splash_* *_saver
#pseudo-device vinum # mod: vinum
#pseudo-device vn # mod: vn
# eof
--ELM969443693-31571-0_
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=ISO-8859-1
Content-Disposition: attachment; filename=kgdb.17
Content-Description: kgdb.17
# gdb -k /var/crash/*17
GNU gdb 4.18
Copyright 1998 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "i386-unknown-freebsd"...
(no debugging symbols found)...
IdlePTD 4018176
initial pcb at 2ec5a0
panicstr: calcru: monotonisation botch 2
panic messages:
---
panic: calcru: monotonisation botch 2
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x6690c328
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc020824c
stack pointer = 0x10:0xc906ed28
frame pointer = 0x10:0xc02a8cec
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 1655 (cvsup)
interrupt mask = none
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x6690c328
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc020824c
stack pointer = 0x10:0xc906ed28
frame pointer = 0x10:0xc02a8cec
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 1655 (cvsup)
interrupt mask = none
syncing disks... 24 9 3 1
done
Uptime: 13m4s
dumping to dev #da/0x20001, offset 646
dump 128 127 126 125 124 123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105 104 103 102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
---
#0 0xc015c813 in boot ()
(kgdb) quit
--ELM969443693-31571-0_--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200009200954.e8K9ss032370>