Date: Thu, 12 Oct 2000 17:45:02 +0400 (MSD) From: Igor Timkin <ivt@logger.gamma.ru> To: "Justin T. Gibbs" <gibbs@scsiguy.com> Cc: freebsd-stable@FreeBSD.ORG Subject: Re: adaptec 39160 Message-ID: <200010121345.RAA28799@logger.gamma.ru> In-Reply-To: <200010102054.e9AKsvZ00715@aslan.scsiguy.com> "from Justin T. Gibbs at Oct 10, 2000 08:54:57 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
> >4.1.1-stable checked out today at 14.30 GMT:
> >FreeBSD news.gamma.ru 4.1.1-STABLE FreeBSD 4.1.1-STABLE #0: Wed Oct 11 18:56:1
> >9 MSD 2000 ivt@news.gamma.ru:/usr/src/sys/compile/NEWS i386
> >
> >Adaptec 39160 rev.2.57.2, matherboard is ASUS P/I-P65UP5/C-P6ND, 2xPPro200.
> >During boot:
>
> I'm still looking into why the panic occurs, but the root of your
> problem is that interrupts are not being properly routed to the
> second function of the 39160. If you pop into your system bios
> and set the IRQ routing to use the 8259 instead of I/O APICs,
> it will probably work. That has been my experience with my PR440FX
> motherboard with twin PPRO 200s.
BIOS don't has such options.
But whith today's kernel (second channel (ahc2) without devices)
3940 seems to work:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1.1-STABLE #1: Thu Oct 12 15:55:16 MSD 2000
ivt@news.gamma.ru:/usr/src/sys/compile/NEWS
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium Pro (199.43-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping = 9
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory = 536870912 (524288K bytes)
avail memory = 519938048 (507752K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc02a1000.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xe800-0xe80f at device 1.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xe000-0xe0ff mem 0xfa000000-0xfa000fff irq 19 at device 9.0 on pci0
aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc1: <Adaptec 3960D Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xf9800000-0xf9800fff irq 18 at device 10.0 on pci0
aic7899: Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc2: <Adaptec 3960D Ultra160 SCSI adapter> port 0xd400-0xd4ff mem 0xf9000000-0xf9000fff irq 9 at device 10.1 on pci0
aic7899: Wide Channel B, SCSI Id=7, 32/255 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd000-0xd01f mem 0xf8800000-0xf88fffff,0xfb000000-0xfb000fff irq 17 at device 11.0 on pci0
fxp0: Ethernet address 00:90:27:41:3d:89
ahc3: <Adaptec 2940 Ultra SCSI adapter> port 0xc800-0xc8ff mem 0xf8000000-0xf8000fff irq 16 at device 12.0 on pci0
aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ed0 at port 0x280-0x29f iomem 0xd8000-0xdbfff irq 5 on isa0
ed0: address 00:00:c0:a4:2e:61, type WD8013EPC (16 bit)
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled
SMP: AP CPU #1 Launched!
ad0: 12416MB <QUANTUM FIREBALL CR13.0A> [25228/16/63] at ata0-master using WDMA2
Waiting 2 seconds for SCSI devices to settle
ahc2: Timedout SCB already complete. Interrupts may not be functioning.
SCB 0x8 - timed out while idle, SEQADDR == 0x4
sg[0] - Addr 0x1f974284 : Length 36
(probe31:ahc2:0:1:0): SCB 8: Immediate reset. Flags = 0x6040
(probe31:ahc2:0:1:0): no longer in timeout, status = 34b
ahc2: Issued Channel A Bus Reset. 14 SCBs aborted
ahc2: Timedout SCB already complete. Interrupts may not be functioning.
SCB 0x8 - timed out while idle, SEQADDR == 0x3
sg[0] - Addr 0x1f95ce84 : Length 36
(probe33:ahc2:0:3:0): SCB 8: Immediate reset. Flags = 0x6040
(probe33:ahc2:0:3:0): no longer in timeout, status = 34b
ahc2: Issued Channel A Bus Reset. 13 SCBs aborted
ahc2: Timedout SCB already complete. Interrupts may not be functioning.
SCB 0x8 - timed out while idle, SEQADDR == 0x4
sg[0] - Addr 0x1f95ca84 : Length 36
(probe35:ahc2:0:5:0): SCB 8: Immediate reset. Flags = 0x6040
(probe35:ahc2:0:5:0): no longer in timeout, status = 34b
ahc2: Issued Channel A Bus Reset. 12 SCBs aborted
ahc2: Timedout SCB already complete. Interrupts may not be functioning.
SCB 0x8 - timed out while idle, SEQADDR == 0x3
sg[0] - Addr 0x1f95c684 : Length 36
(probe37:ahc2:0:8:0): SCB 8: Immediate reset. Flags = 0x6040
(probe37:ahc2:0:8:0): no longer in timeout, status = 34b
ahc2: Issued Channel A Bus Reset. 11 SCBs aborted
ahc2: Timedout SCB already complete. Interrupts may not be functioning.
SCB 0x8 - timed out while idle, SEQADDR == 0x3
sg[0] - Addr 0x1f95c284 : Length 36
(probe39:ahc2:0:10:0): SCB 8: Immediate reset. Flags = 0x6040
(probe39:ahc2:0:10:0): no longer in timeout, status = 34b
ahc2: Issued Channel A Bus Reset. 10 SCBs aborted
ahc2: Timedout SCB already complete. Interrupts may not be functioning.
SCB 0x8 - timed out while idle, SEQADDR == 0x4
sg[0] - Addr 0x1f9a4e84 : Length 36
(probe41:ahc2:0:12:0): SCB 8: Immediate reset. Flags = 0x6040
(probe41:ahc2:0:12:0): no longer in timeout, status = 34b
ahc2: Issued Channel A Bus Reset. 9 SCBs aborted
ahc2: Timedout SCB already complete. Interrupts may not be functioning.
SCB 0x8 - timed out while idle, SEQADDR == 0x4
sg[0] - Addr 0x1f9a4a84 : Length 36
(probe43:ahc2:0:14:0): SCB 8: Immediate reset. Flags = 0x6040
(probe43:ahc2:0:14:0): no longer in timeout, status = 34b
ahc2: Issued Channel A Bus Reset. 8 SCBs aborted
ahc2: Timedout SCB already complete. Interrupts may not be functioning.
SCB 0x8 - timed out while idle, SEQADDR == 0x4
sg[0] - Addr 0x1f974284 : Length 36
(probe31:ahc2:0:1:0): SCB 8: Immediate reset. Flags = 0x6040
(probe31:ahc2:0:1:0): no longer in timeout, status = 34b
ahc2: Issued Channel A Bus Reset. 7 SCBs aborted
ahc2: Timedout SCB already complete. Interrupts may not be functioning.
SCB 0x8 - timed out while idle, SEQADDR == 0x4
sg[0] - Addr 0x1f95ca84 : Length 36
(probe35:ahc2:0:5:0): SCB 8: Immediate reset. Flags = 0x6040
(probe35:ahc2:0:5:0): no longer in timeout, status = 34b
ahc2: Issued Channel A Bus Reset. 6 SCBs aborted
ahc2: Timedout SCB already complete. Interrupts may not be functioning.
SCB 0x8 - timed out while idle, SEQADDR == 0x3
sg[0] - Addr 0x1f95c284 : Length 36
(probe39:ahc2:0:10:0): SCB 8: Immediate reset. Flags = 0x6040
(probe39:ahc2:0:10:0): no longer in timeout, status = 34b
ahc2: Issued Channel A Bus Reset. 5 SCBs aborted
ahc2: Timedout SCB already complete. Interrupts may not be functioning.
SCB 0x8 - timed out while idle, SEQADDR == 0x4
sg[0] - Addr 0x1f9a4a84 : Length 36
(probe43:ahc2:0:14:0): SCB 8: Immediate reset. Flags = 0x6040
(probe43:ahc2:0:14:0): no longer in timeout, status = 34b
ahc2: Issued Channel A Bus Reset. 4 SCBs aborted
ahc2: Timedout SCB already complete. Interrupts may not be functioning.
SCB 0x8 - timed out while idle, SEQADDR == 0x4
sg[0] - Addr 0x1f95ca84 : Length 36
(probe35:ahc2:0:5:0): SCB 8: Immediate reset. Flags = 0x6040
(probe35:ahc2:0:5:0): no longer in timeout, status = 34b
ahc2: Issued Channel A Bus Reset. 3 SCBs aborted
ahc2: Timedout SCB already complete. Interrupts may not be functioning.
SCB 0x8 - timed out while idle, SEQADDR == 0x4
(probe43:ahc2:0:14:0): SCB 8: Immediate reset. Flags = 0x6040
(probe43:ahc2:0:14:0): no longer in timeout, status = 34b
ahc2: Issued Channel A Bus Reset. 2 SCBs aborted
ahc2: Timedout SCB already complete. Interrupts may not be functioning.
SCB 0x8 - timed out while idle, SEQADDR == 0x3
sg[0] - Addr 0x1f9a4a84 : Length 36
(probe43:ahc2:0:14:0): SCB 8: Immediate reset. Flags = 0x6040
(probe43:ahc2:0:14:0): no longer in timeout, status = 34b
ahc2: Issued Channel A Bus Reset. 1 SCBs aborted
ahc2: Timedout SCB already complete. Interrupts may not be functioning.
da4 at ahc1 bus 0 target 2 lun 0
da4: <IBM DDYS-T36950N S80D> Fixed Direct Access SCSI-3 device
da4: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da4: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
da5 at ahc1 bus 0 target 3 lun 0
da5: <IBM DDYS-T36950N S80D> Fixed Direct Access SCSI-3 device
da5: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da5: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
da6 at ahc3 bus 0 target 11 lun 0
da6: <DEC RZ29B (C) DEC 0014> Fixed Direct Access SCSI-2 device
da6: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da6: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da7 at ahc3 bus 0 target 15 lun 0
da7: <SEAGATE ST15150W 0023> Fixed Direct Access SCSI-2 device
da7: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da7: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C)
da3 at ahc1 bus 0 target 0 lun 0
da3: <IBM DDRS-34560D DC1B> Fixed Direct Access SCSI-2 device
da3: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da3: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
Mounting root from ufs:/dev/da0a
da2 at ahc0 bus 0 target 2 lun 0
da2: <WDIGTL ENTERPRISE 1.91> Fixed Direct Access SCSI-2 device
da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
da2: 2077MB (4254819 512 byte sectors: 255H 63S/T 264C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <WDIGTL ENTERPRISE 1.80> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
da1: 2077MB (4254819 512 byte sectors: 255H 63S/T 264C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <WDIGTL ENTERPRISE 1.80> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
da0: 4157MB (8515173 512 byte sectors: 255H 63S/T 530C)
vinum: loaded
vinum: reading configuration from /dev/da2d
vinum: updating configuration from /dev/da1d
vinum: updating configuration from /dev/da0s1d
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200010121345.RAA28799>