Date: Thu, 25 Apr 2002 11:09:45 -0700 From: "Mike Grissom" <mikeyg@speedfusion.net> To: <freebsd-stable@freebsd.org> Subject: Re: SCSI Controller Message-ID: <01f701c1ec84$6194bb60$0301a8c0@mikeyg> References: <Pine.LNX.4.21.0204250921370.23049-100000@danzig.sd.quantified.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hmmmmm This one is very old like made in 96-97. What RAID type are you using? ----- Original Message ----- From: "Doug Silver" <dsilver@urchin.com> To: "Mike Grissom" <mikeyg@speedfusion.net> Sent: Thursday, April 25, 2002 9:25 AM Subject: Re: SCSI Controller > On Thu, 25 Apr 2002, Mike Grissom wrote: > > > I have an old hp netserver 5/60LM server which has 7 2GB harddrives in > > it configured for a disk array. For some reason its only seeing one > > or two of the drives. The controller is a SmartCACHE III by DPT. So > > we tested out installing windows NT onto it and windows NT > > automatically saw 1 14GB harddrive instead of 7 2GBs. What could be > > causing this. The disk array configuration is correct otherwise it > > wouldnt be letting NT see it. Does FreeBSD not support it? Thanks in > > advance! > > > > > > Hi Mike - > > I also have a couple of old HP netservers (i.e. toasters), multi-CPU, scsi > RAID, etc. FreeBSD didn't have any problems recognizing the single > (striped) drive I set up. > > -- > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > Doug Silver > Network Manager > Urchin Corporation http://www.urchin.com > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > Here's what it sees during bootup: > > amr0: <AMI MegaRAID> port 0xec80-0xecff irq 11 at device 10.0 on pci1 > amr0: <Series 428> Firmware , BIOS , 4MB RAM > ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0xe800-0xe8ff mem > 0xfe1fb000-0xfe1fbfff irq 14 at device 11.0 on pci1 > ahc0: Using left over BIOS settings > aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs > ahc1: <Adaptec aic7880 Ultra SCSI adapter> port 0xe400-0xe4ff mem > 0xfe1fa000-0xfe1fafff irq 5 at device 12.0 on pci1 > ahc1: Using left over BIOS settings > aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs > ahc2: <Adaptec 2902/04/10/15/20/30C SCSI adapter> port 0xe000-0xe0ff mem > 0xfe1f9000-0xfe1f9fff irq 9 at device 14.0 on pci1 > aic7850: Single Channel A, SCSI Id=7, 3/255 SCBs > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01f701c1ec84$6194bb60$0301a8c0>