Date: Mon, 27 Mar 2000 16:45:33 -0500 From: "Philip R. Moyer" <pmoyer@hyperon.com> To: freebsd-mobile@freebsd.org Cc: woody@nosloop.com Subject: Re: CEM56 pccard.conf entry??? Message-ID: <200003272145.NAA17393@scaup.prod.itd.earthlink.net>
next in thread | raw e-mail | index | archive | help
Back in November, Woody Poolson asked about a pccard.conf entry for the
Xircom RealPort Ethernet 10/100 + Modem 56, aka CEM56. Nick Slager
posted an entry that works for the Ethernet interface, but there were
no followups for the modem.
I've got one of these cards as well. It worked under 3.4-RELEASE+PAO,
but it does not work under 4.0-STABLE with pccard. Soooo, does anyone
have a working pccard.conf entry for the modem part of the card? I'm
not familiar enough with pcmcia configurations to figure it out on my
own. I've appended the dumpcis output for the card, if it helps any.
Cheers,
Phil
Code 136 not found
Code 136 not found
code Unknown ignored
code Manufacturer ID ignored
Code 138 not found
Code 138 not found
code Unknown ignored
Code 139 not found
Code 139 not found
code Unknown ignored
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 2
000: 00 ff
Attribute memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #3, code = 0x15 (Version 1 info), length = 59
000: 05 00 58 69 72 63 6f 6d 00 43 72 65 64 69 74 43
010: 61 72 64 20 45 74 68 65 72 6e 65 74 20 31 30 2f
020: 31 30 30 20 2b 20 4d 6f 64 65 6d 20 35 36 00 43
030: 45 4d 35 36 00 31 2e 30 30 00 ff
Version = 5.0, Manuf = [Xircom],card vers = [CreditCard Ethernet 10/100 + Modem 56]
Addit. info = [CEM56],[1.00]
Tuple #4, code = 0x0 (Null tuple), length = 8
000: 33 dc eb 00 00 00 00 00
Tuple #5, code = 0x0 (Null tuple), length = 5
000: 05 01 0a 11 46
Tuple #6, code = 0x44 (Card init date), length = 4
000: 41 71 2e 28
Tuple #7, code = 0x1a (Configuration map), length = 5
000: 01 3f 80 ff 67
Reg len = 2, config register addr = 0xff80, last config = 0x3f
Registers: XXX--XX-
Tuple #8, code = 0x1b (Configuration entry), length = 20
000: e7 c1 9d 0f 55 4d 5d 4e e0 17 17 ea 60 e8 02 07
010: f0 bc 8e 20
Config index = 0x27(default)
Interface byte = 0xc1 (I/O) +RDY/-BSY active, wait signal supported
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Minimum operating supply voltage: 4.5 x 1V
Maximum operating supply voltage: 5.5 x 1V
Continuous supply current: 4.5 x 100mA
Wait scale Speed = 1.2 x 10 ms
RDY/BSY scale Speed = 1.2 x 10 ms
Card decodes 23 address lines
IRQ modes:
IRQs: NMI IOCK BERR 0 1 2 4 8 9 10 12
Max twin cards = 0
Misc attr: (Power down supported)
Tuple #9, code = 0x1b (Configuration entry), length = 7
000: 1f 08 ea 60 e8 03 07
Config index = 0x1f
Card decodes 10 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x3e8 block length = 0x8
Tuple #10, code = 0x1b (Configuration entry), length = 7
000: 17 08 ea 60 f8 02 07
Config index = 0x17
Card decodes 10 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x2f8 block length = 0x8
Tuple #11, code = 0x1b (Configuration entry), length = 7
000: 0f 08 ea 60 f8 03 07
Config index = 0xf
Card decodes 10 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x3f8 block length = 0x8
Tuple #12, code = 0x1b (Configuration entry), length = 3
000: 3f 08 63
Config index = 0x3f
Card decodes 3 address lines, full 8/16 Bit I/O
Tuple #13, code = 0x21 (Functional ID), length = 2
000: 02 00
Serial port/modem
Tuple #14, code = 0x22 (Functional EXT), length = 4
000: 00 02 0f 5c
Serial interface extension:
16550 UART, Parity - Space,Mark,Odd,Even,
Tuple #15, code = 0x22 (Functional EXT), length = 12
000: 02 06 00 3f 1c 03 03 0f 07 00 01 b5
Data modem services available:
Tuple #16, code = 0x22 (Functional EXT), length = 8
000: 13 06 00 0b 00 02 00 b5
Tuple #17, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #18, code = 0x22 (Functional EXT), length = 8
000: 04 06 00 10 a4 eb dc 33
Voice services available:
Tuple #19, code = 0x0 (Null tuple), length = 12
000: 39 30 30 34 41 42 45 42 44 43 33 33
Tuple #20, code = 0x0 (Null tuple), length = 4
000: 01 00 00 00
Tuple #21, code = 0x14 (No link), length = 0
Tuple #22, code = 0xff (Terminator), length = 0
2 slots found
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200003272145.NAA17393>