Date: Mon, 6 May 2002 23:41:49 +1000 From: "Scott Penno" <scott.penno@gennex.com.au> To: <freebsd-current@FreeBSD.ORG>, <freebsd-mobile@FreeBSD.ORG> Subject: Re: Problems with Dell Inspiron 2500/NEWCARD/Xircom CBEM56G Message-ID: <002801c1f503$c6db1c80$0128a8c0@SCOTT> References: <000201c1f377$e7668d00$0128a8c0@SCOTT> <004e01c1f4ec$56f52490$0128a8c0@SCOTT>
next in thread | previous in thread | raw e-mail | index | archive | help
I removed apm from the kernel which appeared to be playing having with acpi and things are now working a treat. The card works fine, however I do receive the following message, 'cardbus0: <unknown card> (vendor=0x115d, dev=0x0103) at 0.1 irq 5'. I've had a look through various lists and couldn't find a resolution. Is this a real drama and if so, how do I correct it? Regards, Scott ----- Original Message ----- From: "Scott Penno" <scott.penno@gennex.com.au> To: <freebsd-current@FreeBSD.ORG>; <freebsd-mobile@FreeBSD.ORG> Sent: Monday, May 06, 2002 8:54 PM Subject: Problems with Dell Inspiron 2500/NEWCARD/Xircom CBEM56G > Just an update. I've tried three different 32 bit cards and every time the > card was inserted the laptop locked up. I recompiled the kernel without the > miibus and dc and then inserted the Xircom card the laptop would appear to > lock up, that is, everything that was running just stopped. When the card > was re-inserted, everything would come back to life and a console message > would appear reporting 'pccbb0: Cardbus card activation failed'. A similar > result was experienced with the other cards. With that said, I'm still no > closer to identifying the cause of these problems. Any ideas? > > Scott. > > > > ----- Original Message ----- > From: "Scott Penno" <scott.penno@gennex.com.au> > To: <freebsd-current@FreeBSD.ORG>; <freebsd-mobile@FreeBSD.ORG> > Sent: Sunday, May 05, 2002 12:27 AM > Subject: Problems with Dell Inspiron 2500/NEWCARD/Xircom CBEM56G [DRAFT] > > > > Hi there, > > > > I've been attempting to get my Xircom Realport CBEM56G working under > CURRENT > > for some time without success. I grabbed the latest source on 03/05 > 12:00PM > > GMT and compiled without a problem. I have a 3Com Etherlink III 3C589D > card > > which is a 16 bit card which I can insert and use without a problem. > > However when I try and insert my Xircom Realport CBEM56G, my laptop locks > > up. > > Under 4.X the cardbus bridge caused some intial problems getting > configured > > but once working, worked a treat and I suspect this is where the current > > problem is. Without the kernel option PCI_ALLOW_UNSUPPORTED_IO_RANGE with > > NEWCARD, I'm unable to > > acheive any card functionality, when compiled with this option the 16 bit > > 3Com card works fine but the 32bit Xircom card causes a lockup. > Interesting > > to note also that under Windows XP and FreeBSD 4.X the bridge is detected > as > > an OZ6933, while under FreeBSD 5.X it's detected as an OZ6833. > > Not sure where to go from here so any assistance appreciated. I've > included > > a dmesg from boot -v with the 3Com card, console messages when the Xircom > > card is inserted until the lockup occurs and finally the kernel > > configuration file. > > > > Regards, > > > > Scott. > > > > > > > > Copyright (c) 1992-2002 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > The Regents of the University of California. All rights reserved. > > FreeBSD 5.0-CURRENT #2: Sat May 4 12:13:42 EST 2002 > > root@jupiter.gennex.com.au:/usr/obj/usr/src/sys/JUPITER > > Preloaded elf kernel "/boot/kernel/kernel" at 0xc043b000. > > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc043b0b4. > > Calibrating clock(s) ... TSC clock: 897239123 Hz, i8254 clock: 1193138 Hz > > CLK_USE_I8254_CALIBRATION not specified - using default frequency > > Timecounter "i8254" frequency 1193182 Hz > > CLK_USE_TSC_CALIBRATION not specified - using old calibration method > > TSC initialization skipped: APM enabled. > > CPU: Pentium III/Pentium III Xeon/Celeron (897.28-MHz 686-class CPU) > > Origin = "GenuineIntel" Id = 0x68a Stepping = 10 > > > > > Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV, > > PAT,PSE36,MMX,FXSR,SSE> > > real memory = 266797056 (260544K bytes) > > Physical memory chunk(s): > > 0x00001000 - 0x0009efff, 647168 bytes (158 pages) > > 0x00462000 - 0x0fe67fff, 262168576 bytes (64006 pages) > > avail memory = 254808064 (248836K bytes) > > bios32: Found BIOS32 Service Directory header at 0xc00f66b0 > > bios32: Entry = 0xfd890 (c00fd890) Rev = 0 Len = 1 > > pcibios: PCI BIOS entry at 0xfd890+0x13a > > pnpbios: Found PnP BIOS data at 0xc00f6700 > > pnpbios: Entry = f0000:a2a6 Rev = 1.0 > > Other BIOS signatures found: > > null: <null device, zero device> > > random: <entropy source> > > mem: <memory & I/O> > > Pentium Pro MTRR support enabled > > VESA: information block > > 56 45 53 41 00 03 00 01 00 01 01 00 00 00 40 00 > > 00 01 10 00 00 01 31 01 00 01 43 01 00 01 5d 01 > > 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > VESA: 16 mode(s) found > > VESA: v3.0, 1024k memory, flags:0x1, mode table:0xc03895c0 (1000040) > > VESA: Intel815M(TM) Graphics Chip Accelerated VGA BIOS > > VESA: Intel Corporation i815M Graphics Controller Hardware Version 0.0 > > pci_open(1): mode 1 addr port (0x0cf8) is 0x80001004 > > pci_open(1a): mode1res=0x80000000 (0x80000000) > > pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=11308086) > > Using $PIR table, 7 entries at 0xc00fdf50 > > apm0: <APM BIOS> on motherboard > > apm0: found APM BIOS v1.2, connected at v1.2 > > npx0: <math processor> on motherboard > > npx0: INT 16 interface > > acpi0: Other PM system enabled. > > pcib0: <Intel 82815 (i815 GMCH) Host To Hub bridge> at pcibus 0 on > > motherboard > > pci0: physical bus=0 > > found-> vendor=0x8086, dev=0x1130, revid=0x11 > > bus=0, slot=0, func=0 > > class=06-00-00, hdrtype=0x00, mfdev=0 > > map[10]: type 3, range 32, base f8000000, size 26, enabled > > map[14]: type 1, range 32, base f4000000, size 19, enabled > > found-> vendor=0x8086, dev=0x1132, revid=0x11 > > bus=0, slot=2, func=0 > > class=03-00-00, hdrtype=0x00, mfdev=0 > > intpin=a, irq=10 > > powerspec 2 supports D0 D3 current D0 > > found-> vendor=0x8086, dev=0x2448, revid=0x03 > > bus=0, slot=30, func=0 > > class=06-04-00, hdrtype=0x01, mfdev=0 > > found-> vendor=0x8086, dev=0x244c, revid=0x03 > > bus=0, slot=31, func=0 > > class=06-01-00, hdrtype=0x00, mfdev=1 > > map[20]: type 4, range 32, base 00001800, size 4, enabled > > found-> vendor=0x8086, dev=0x244a, revid=0x03 > > bus=0, slot=31, func=1 > > class=01-01-80, hdrtype=0x00, mfdev=0 > > map[20]: type 4, range 32, base 00001820, size 5, enabled > > found-> vendor=0x8086, dev=0x2442, revid=0x03 > > bus=0, slot=31, func=2 > > class=0c-03-00, hdrtype=0x00, mfdev=0 > > intpin=d, irq=5 > > map[20]: type 4, range 32, base 00001810, size 4, enabled > > found-> vendor=0x8086, dev=0x2443, revid=0x03 > > bus=0, slot=31, func=3 > > class=0c-05-00, hdrtype=0x00, mfdev=0 > > intpin=b, irq=5 > > map[20]: type 4, range 32, base 00001880, size 5, enabled > > found-> vendor=0x8086, dev=0x2444, revid=0x03 > > bus=0, slot=31, func=4 > > class=0c-03-00, hdrtype=0x00, mfdev=0 > > intpin=c, irq=5 > > map[10]: type 4, range 32, base 00001c00, size 8, enabled > > map[14]: type 4, range 32, base 00001840, size 6, enabled > > found-> vendor=0x8086, dev=0x2445, revid=0x03 > > bus=0, slot=31, func=5 > > class=04-01-00, hdrtype=0x00, mfdev=0 > > intpin=b, irq=5 > > pci0: <PCI bus> on pcib0 > > agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem > > 0xf4000000-0xf407ffff,0xf8000000-0xfbffffff irq 10 at device 2.0 on pci0 > > agp0: allocating GATT for aperture of size 64M > > pcib1: <PCI-PCI bridge> at device 30.0 on pci0 > > pcib1: secondary bus 1 > > pcib1: subordinate bus 1 > > pcib1: I/O decode 0xf000-0xfff > > pcib1: memory decode 0xfff00000-0xfffff > > pcib1: prefetched decode 0xfff00000-0xfffff > > pci1: physical bus=1 > > found-> vendor=0x1217, dev=0x6933, revid=0x01 > > bus=1, slot=3, func=0 > > class=06-07-00, hdrtype=0x02, mfdev=1 > > intpin=a, irq=9 > > powerspec 2 supports D0 D1 D2 D3 current D0 > > found-> vendor=0x1217, dev=0x6933, revid=0x01 > > bus=1, slot=3, func=1 > > class=06-07-00, hdrtype=0x02, mfdev=1 > > intpin=b, irq=9 > > powerspec 2 supports D0 D1 D2 D3 current D0 > > pci1: <PCI bus> on pcib1 > > pccbb0: <O2Mirco OZ6833 PCI-CardBus Bridge> irq 9 at device 3.0 on pci1 > > start (84000000) < sc->membase (fff00000) > > end (ffffffff) > sc->memlimit (fffff) > > pcib1: device pccbb0 requested unsupported memory range > > 0x84000000-0xffffffff (decoding 0xfff00000-0xfffff, 0xfff00000-0xfffff) > > pcib1: device pccbb0 requested decoded memory range 0x84000000-0xffffffff > > cardbus0: <CardBus bus> on pccbb0 > > pccard0: <16-bit PCCard bus> on pccbb0 > > pccbb1: <O2Mirco OZ6833 PCI-CardBus Bridge> irq 9 at device 3.1 on pci1 > > start (84000000) < sc->membase (fff00000) > > end (ffffffff) > sc->memlimit (fffff) > > pcib1: device pccbb1 requested unsupported memory range > > 0x84000000-0xffffffff (decoding 0xfff00000-0xfffff, 0xfff00000-0xfffff) > > pcib1: device pccbb1 requested decoded memory range 0x84000000-0xffffffff > > cardbus1: <CardBus bus> on pccbb1 > > pccard1: <16-bit PCCard bus> on pccbb1 > > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > > isa0: <ISA bus> on isab0 > > atapci0: <Intel ICH2 ATA100 controller> port 0x1800-0x180f at device 31.1 > on > > pci0 > > ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1800 > > ata0: mask=03 ostat0=50 ostat2=00 > > ata0-master: ATAPI 00 00 > > ata0-slave: ATAPI 00 00 > > ata0: mask=03 stat0=50 stat1=00 > > ata0-master: ATA 01 a5 > > ata0: devices=01 > > ata0: at 0x1f0 irq 14 on atapci0 > > ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1808 > > ata1: mask=03 ostat0=50 ostat2=00 > > ata1-master: ATAPI 14 eb > > ata1-slave: ATAPI 00 00 > > ata1: mask=03 stat0=00 stat1=00 > > ata1: devices=04 > > ata1: at 0x170 irq 15 on atapci0 > > pci0: <serial bus, USB> at device 31.2 (no driver attached) > > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > > pci0: <serial bus, USB> at device 31.4 (no driver attached) > > pcm0: <Intel 82801BA (ICH2)> port 0x1840-0x187f,0x1c00-0x1cff irq 5 at > > device 31.5 on pci0 > > pcm0: ac97 codec id 0x83847600 (SigmaTel STAC9700/9783/9784) > > pcm0: ac97 codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, > > SigmaTel 3D Enhancement > > pcm0: sndbuf_setmap 71000, 4000; 0xd1dca000 -> 71000 > > pcm0: sndbuf_setmap 8e000, 4000; 0xd1dd7000 -> 8e000 > > pcm0: measured ac97 link rate at 29293 Hz > > ata: ata0 already exists; skipping it > > ata: ata1 already exists; skipping it > > Trying Read_Port at 203 > > Trying Read_Port at 243 > > Trying Read_Port at 283 > > Trying Read_Port at 2c3 > > Trying Read_Port at 303 > > Trying Read_Port at 343 > > Trying Read_Port at 383 > > Trying Read_Port at 3c3 > > sc: sc0 already exists; skipping it > > vga: vga0 already exists; skipping it > > isa_probe_children: disabling PnP devices > > isa_probe_children: probing non-PnP devices > > orm0: <Option ROMs> at iomem > 0xd4000-0xd7fff,0xd0000-0xd3fff,0xc0000-0xcbfff > > on isa0 > > adv0 failed to probe on isa0 > > aha0 failed to probe on isa0 > > aic0 failed to probe on isa0 > > atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 > > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > > atkbd: the current kbd controller command byte 0047 > > atkbd: keyboard ID 0x41ab (2) > > kbd0 at atkbd0 > > kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 > > psm0: current command byte:0047 > > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > > psm0: model IntelliMouse, device ID 3-00, 3 buttons > > psm0: config:00000000, flags:00000000, packet size:4 > > psm0: syncmask:08, syncbits:08 > > bt0 failed to probe on isa0 > > cs0 failed to probe at port 0x300 on isa0 > > ed0 failed to probe at port 0x280 iomem 0xd8000 irq 10 on isa0 > > fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port > > 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 > > fdc0: FIFO enabled, 8 bytes threshold > > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > > fe0 failed to probe at port 0x300 on isa0 > > ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0 > > le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0 > > lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0 > > pmtimer0 on isa0 > > ppc0: parallel port found at 0x378 > > ppc0: using extended I/O port range > > ppc0: ECP SPP ECP+EPP SPP > > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > > ppc0: FIFO with 16/16/8 bytes threshold > > plip0: <PLIP network interface> on ppbus0 > > bpf: lp0 attached > > lpt0: <Printer> on ppbus0 > > lpt0: Interrupt-driven port > > sc0: <System console> at flags 0x100 on isa0 > > sc0: VGA <16 virtual consoles, flags=0x300> > > sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) > > sio0: irq maps: 0x1 0x11 0x1 0x1 > > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > > sio0: type 16550A > > sio1: configured irq 3 not in bitmap of probed irqs 0 > > sio1: port may not be enabled > > sio1: irq maps: 0x1 0x1 0x1 0x1 > > sio1: probe failed test(s): 0 1 2 4 6 7 9 > > sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 > > sio2: not probed (disabled) > > sio3: not probed (disabled) > > sn0 failed to probe at port 0x300 irq 10 on isa0 > > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > > fb0: vga0, vga, type:VGA (5), flags:0x700ff > > fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 > > fb0: init mode:24, bios mode:3, current mode:24 > > fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k > > VGA parameters upon power-up > > 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 > > bf 1f 00 4f 0d 0e 00 00 06 40 9c 8e 8f 28 1f 96 > > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > > VGA parameters in BIOS for mode 24 > > 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 > > bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 > > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > > EGA/VGA parameters to be used for mode 24 > > 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 > > bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 > > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > > vt0 failed to probe on isa0 > > isa_probe_children: probing PnP devices > > BIOS Geometries: > > 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors > > 0 accounted for > > Device configuration finished. > > procfs registered > > Timecounters tick every 10.000 msec > > bpf: lo0 attached > > ad0: success setting UDMA5 on Intel chip > > Creating DISK ad0 > > ar: FreeBSD check1 failed > > ad0: <HITACHI_DK23CA-20/00H1A0G1> ATA-5 disk at ata0-master > > ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B > > ad0: 16 secs/int, 1 depth queue, UDMA100 > > ad0: piomode=4 dmamode=2 udmamode=5 cblid=1 > > ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1 > > ata1-master: success setting PIO4 on generic chip > > acd0: <SAMSUNG CD-ROM SN-124/N001> CDROM drive at ata1 as master > > acd0: read 4134KB/s (34515KB/s), 128KB buffer, PIO4 > > acd0: Reads: CD-R, CD-RW, CD-DA stream, packet > > acd0: Writes: > > acd0: Audio: play, 255 volume levels > > acd0: Mechanism: ejectable tray, unlocked > > acd0: Medium: CD-ROM 120mm audio disc > > Mounting root from ufs:/dev/ad0s2a > > ad0s1: type 0x6, start 63, end = 273104, size 273042 : OK > > ad0s2: type 0xa5, start 273105, end = 19663559, size 19390455 : OK > > ad0s3: type 0xf, start 19663560, end = 39054014, size 19390455 > > ad0s3: C/H/S start 1023/0/1 (16434495) != start 19663560: invalid > > ad0s5: type 0x7, start 19663623, end = 39054014, size 19390392 > > ad0s5: C/H/S start 1023/1/1 (16434558) != start 19663623: invalid > > start_init: trying /sbin/init > > Entropy harvesting: > > interrupts > > ethernet > > point_to_point > > . > > swapon: adding /dev/ad0s2b as swap device > > swapon: adding /dev/ad0s2e as swap device > > Automatic boot in progress... > > /dev/ad0s2a: FILESYSTEM CLEAN; SKIPPING CHECKS > > /dev/ad0s2a: clean, 2846783 free (20743 frags, 353255 blocks, 0.5% > > fragmentation) > > Doing initial network setup: > > host.conf > > hostname > > . > > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > > inet 127.0.0.1 netmask 0xff000000 > > route: > > writing to routing socket > > : > > Network is unreachable > > add net default: gateway 192.168.40.254: Network is unreachable > > Additional routing options: > > . > > Routing daemons: > > . > > Additional daemons: > > syslogd > > May 4 12:59:53 jupiter syslogd: kernel boot file is /boot/kernel/kernel > > . > > Doing additional network setup: > > . > > Starting final network daemons: > > . > > ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib > > a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout > /usr/X11R6/lib/aout > > Starting standard daemons: > > cron > > sshd > > sendmail-submit > > sendmail-clientmqueue > > . > > Initial rc.i386 initialization: > > . > > Configuring syscons: > > blanktime > > . > > Additional ABI support: > > . > > Local package initialization: > > . > > Additional TCP options: > > . > > Starting background filesystem checks > > > > Sat May 4 12:59:55 EST 2002 > > May 4 13:00:03 jupiter login: ROOT LOGIN (root) ON ttyv1 > > link_elf: symbol gd_curproc undefined > > link_elf: symbol gd_curproc undefined > > link_elf: symbol gd_curproc undefined > > link_elf: symbol gd_curproc undefined > > link_elf: symbol gd_curproc undefined > > fd0: autoselected 1440 KB medium > > WARNING: R/W mount of /mnt denied. Filesystem is not clean - run fsck > > WARNING: R/W mount of /mnt denied. Filesystem is not clean - run fsck > > fd0: autoselected 1440 KB medium > > WARNING: R/W mount of /mnt denied. Filesystem is not clean - run fsck > > start (84000000) < sc->membase (fff00000) > > end (ffffffff) > sc->memlimit (fffff) > > pcib1: device pccard0 requested unsupported memory range > > 0x84000000-0xffffffff (decoding 0xfff00000-0xfffff, 0xfff00000-0xfffff) > > pcib1: device pccard0 requested decoded memory range 0x84000000-0xffffffff > > pccard0: CIS version PCCARD 2.0 or 2.1 > > pccard0: CIS info: 3Com Corporation, 3C589D, TP/BNC LAN Card Ver. 2a, > 000002 > > pccard0: Manufacturer code 0x101, product 0x589 > > pccard0: function 0: network adapter, ccr addr 10000 mask 3 > > pccard0: function 0, config table entry 1: I/O card; irq mask ffff; iomask > > 4, iospace 0-f; rdybsy_active wp_active bvd_active io8 io16 irqlevel > > pccard0: function 0, config table entry 3: I/O card; irq mask ffff; iomask > > 4, iospace 0-f; rdybsy_active wp_active bvd_active io8 io16 irqlevel > > pcib1: device pccard0 requested decoded I/O range 0x100-0xffffffff > > start (84000000) < sc->membase (fff00000) > > end (ffffffff) > sc->memlimit (fffff) > > pcib1: device pccard0 requested unsupported memory range > > 0x84000000-0xffffffff (decoding 0xfff00000-0xfffff, 0xfff00000-0xfffff) > > pcib1: device pccard0 requested decoded memory range 0x84000000-0xffffffff > > ep0: <3Com 3c589 10Mbps Ethernet> at port 0x100-0x10f irq 9 function 0 > > config 1 on pccard0 > > pcib1: device ep0 requested decoded I/O range 0x100-0x10f > > pcib1: device pccard0 requested decoded I/O range 0x100-0x10f > > pcib1: device ep0 requested decoded I/O range 0x100-0x10f > > ep0: Ethernet address 00:60:97:89:94:37 > > bpf: ep0 attached > > May 4 13:35:25 jupiter login: ROOT LOGIN (root) ON ttyv2 > > > > > > > > start (84000000) < sc->membase (fff00000) > > end (ffffffff) > sc->memlimit (fffff) > > Product version: 5.0 > > Product name: Xircom | CardBus Ethernet 10/100 + Modem 56 | CBEM56G | 1.03 > | > > Manufacturer ID: 0501030181 > > Functions: Network Adaptor, Multi-Functioned > > Function Extension: 04060010a4d1c890 > > Function Extension: 0102 > > Function Extension: 0280969800 > > Function Extension: 0200e1f505 > > Function Extension: 0301 > > Function Extension: 0303 > > Function Extension: 0501 > > cardbus0: Invalid BAR number: 27(06) > > CIS reading done > > start (84000000) < sc->membase (fff00000) > > end (ffffffff) > sc->memlimit (fffff) > > pcib1: device cardbus0 requested unsupported memory range > > 0x84000000-0xffffffff > > (decoding 0xfff00000-0xfffff,0xfff00000-0xfffff) > > pcib1: device cardbus0 requested decoded memory range > 0x84000000-0xffffffff > > end (0x840217f) > sc->memlimit (fffff) > > pcib1: device cardbus0 requested unsupported memory range > > 0x84002000-0x8400217f > > (decoding 0xfff00000-0xfffff,0xfff00000-0xfffff) > > pcib1: device cardbus0 requested decoded memory range > 0x84002000-0x8400217f > > end (8400217f) > sc->memlimit (fffff) > > pcib1: device cardbus0 requested unsupported memory range > > 0x84002000-0x8400217f > > (decoding 0xfff00000-0xfffff,0xfff00000-0xfffff) > > pcib1: device cardbus0 requested decoded memory range > 0x84002000-0x8400217f > > pcib1: device cardbus0 requested decoded I/O range 0x1000-0xffffffff > > pcib1: device cardbus0 requested decoded I/O range 0x1000-0x107f > > dc0: <Xircom X3201 10/100BaseTX> port 0x1000-0x107f mem > > 0x84002000-0x840020ff,0x84002100-0x8400217f irq 9 at device 0.0 on > cardbus0 > > pcib1: device dc0 requested decoded I/O range 0x1000-0x107f > > <... hardlock occurs here ...> > > > > > > > > # > > # NEWCARD -- efforts at porting newconfig pccard/cardbus code to newbus > > # > > > > machine i386 > > cpu I686_CPU > > ident JUPITER > > maxusers 0 > > > > makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols > > > > options INET #InterNETworking > > options FFS #Berkeley Fast Filesystem > > options SOFTUPDATES #Enable FFS soft updates support > > options UFS_DIRHASH #Improve performance on big directories > > options NFSCLIENT #Network Filesystem Client > > options MSDOSFS #MSDOS Filesystem > > options CD9660 #ISO 9660 Filesystem > > options PROCFS #Process filesystem (requires PSEUDOFS) > > options PSEUDOFS #Pseudo-filesystem framework > > options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] > > options KTRACE #ktrace(1) support > > options SYSVSHM #SYSV-style shared memory > > options SYSVMSG #SYSV-style message queues > > options SYSVSEM #SYSV-style semaphores > > options P1003_1B #Posix P1003_1B real-time extensions > > options _KPOSIX_PRIORITY_SCHEDULING > > options KBD_INSTALL_CDEV # install a CDEV entry in /dev > > > > # Debugging for use in -current > > options DDB #Enable the kernel debugger > > options INVARIANTS #Enable calls of extra sanity checking > > options INVARIANT_SUPPORT #Extra sanity checks of internal structures, > > required by INVARIANTS > > options WITNESS #Enable mutex checks to detects deadlocks and cycles > > options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed > > > > device isa > > device pci > > #options PCI_ENABLE_IO_MODES # Enable pci resources left off by a "lazy > > BIOS" > > options PCI_ALLOW_UNSUPPORTED_IO_RANGE > > > > # AGP GART support > > device agp > > options VESA > > > > # Floppy drives > > device fdc > > > > # ATA and ATAPI devices > > device ata > > device atadisk # ATA disk drives > > device atapicd # ATAPI CDROM drives > > > > # atkbdc0 controls both the keyboard and the PS/2 mouse > > device atkbdc 1 # At keyboard controller > > device atkbd # at keyboard > > device psm # psm mouse > > > > device vga # VGA screen > > > > # splash screen/screen saver > > device splash > > > > # syscons is the default console driver, resembling an SCO console > > device sc 1 > > > > # Floating point support - do not disable. > > device npx > > > > # Power management support (see NOTES for more options) > > device apm > > # Add suspend/resume support for the i8254. > > device pmtimer > > > > # Pcmcia and cardbus bridge support > > device pccbb # cardbus (yenta) bridge > > device pccard > > device cardbus > > #device card > > #device pcic > > > > # Serial (COM) ports > > device sio # 8250, 16[45]50 based serial ports > > > > # Parallel port > > device ppc > > device ppbus # Parallel port bus (required) > > device lpt # Printer > > device plip # TCP/IP over parallel > > > > # PCI Ethernet NICs that use the common MII bus controller code. > > # NOTE: Be sure to keep the 'device miibus' line in order to use these > NICs! > > device miibus # MII bus support > > device dc # DEC/Intel 21143 and various workalikes > > > > # ISA Ethernet NICs. pccard nics included. > > device ep # Etherlink III based cards > > > > # Wireless NIC cards > > device wi # WaveLAN/IEEE 802.11 wireless NICs. > > > > # Pseudo devices - the number indicates how many units to allocate. > > device random # Entropy device > > device loop # Network loopback > > device ether # Ethernet support > > device tun # Packet tunnel. > > device pty # Pseudo-ttys (telnet etc) > > device md # Memory "disks" > > device gif # IPv6 and IPv4 tunneling > > > > # The `bpf' device enables the Berkeley Packet Filter. > > # Be aware of the administrative consequences of enabling this! > > device bpf # Berkeley packet filter > > > > device pcm > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-mobile" in the body of the message > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002801c1f503$c6db1c80$0128a8c0>