Date: Sat, 3 May 2014 09:51:11 -0700 (PDT) From: Michael S <msherman77@yahoo.com> To: FreeBSD Mailing List <freebsd-questions@freebsd.org> Subject: FreeBSD installer can't detect SATA disk Message-ID: <1399135871.14503.YahooMailNeo@web163101.mail.bf1.yahoo.com>
index | next in thread | raw e-mail
Good day all. I have an old machine and I want to make it into a FreeBSD workstation. It's a triple core AMD Phenom on an ECS board. When the FreeBSD 10 (x86) installer reaches the disk partitioning part, it bails. Apparently it can't detect the SATA 2 hard drive. I tried playing with BIOS, turning off APCI, and other options, no success OpenBSD installer finds the drive without issues. POST reports the drive as SATA 2 ST3250620AS 3AAk Ultra DMA Mode-6 S.M.A.R.T Capable and Status OK. Please let me know if anyone had a similar issue. Thanks in advance Michael dmesg output Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.0-RELEASE #0 r260789: Fri Jan 17 01:46:25 UTC 2014 root@snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC i386 FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610 CPU: AMD Phenom(tm) 8450e Triple-Core Processor (2095.50-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x100f23 Family = 0x10 Model = 0x2 Stepping = 3 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x802009<SSE3,MON,CX16,POPCNT> AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x7ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS> TSC: P-state invariant real memory = 2684354560 (2560 MB) avail memory = 2481143808 (2366 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <081610 APIC1105> FreeBSD/SMP: Multiprocessor System Detected: 3 CPUs FreeBSD/SMP: 1 package(s) x 3 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 ioapic0 <Version 2.1> irqs 0-23 on motherboard kbd1 at kbdmux0 random: <Software, Yarrow> initialized acpi0: <081610 RSDT1105> on motherboard acpi0: Power Button (fixed) acpi0: reservation of fee00000, 1000 (3) failed acpi0: reservation of ffb80000, 80000 (3) failed acpi0: reservation of fec10000, 20 (3) failed acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 97f00000 (3) failed cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xf0000000-0xf7ffffff,0xfeaf0000-0xfeafffff,0xfe900000-0xfe9fffff irq 18 at device 5.0 on pci1 vgapci0: Boot video device pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pci2: <ACPI PCI bus> on pcib2 re0: <RealTek 810xE PCIe 10/100baseTX> port 0xe800-0xe8ff mem 0xfdfff000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 17 at device 0.0 on pci2 re0: Using 1 MSI-X message re0: Chip rev. 0x24800000 re0: MAC rev. 0x00400000 miibus0: <MII bus> on re0 rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow re0: Ethernet address: 44:87:fc:e3:cf:54 ahci0: <ATI IXP700 AHCI SATA controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe8ff800-0xfe8ffbff irq 22 at device 17.0 on pci0 ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe8fe000-0xfe8fefff irq 16 at device 18.0 on pci0 usbus0 on ohci0 ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe8fd000-0xfe8fdfff irq 16 at device 18.1 on pci0 usbus1 on ohci1 ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe8ff000-0xfe8ff0ff irq 17 at device 18.2 on pci0 ehci0: AMD SB600/700 quirk applied usbus2: EHCI version 1.0 usbus2 on ehci0 ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe8fc000-0xfe8fcfff irq 18 at device 19.0 on pci0 usbus3 on ohci2 ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe8fb000-0xfe8fbfff irq 18 at device 19.1 on pci0 usbus4 on ohci3 ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe8fa800-0xfe8fa8ff irq 19 at device 19.2 on pci0 ehci1: AMD SB600/700 quirk applied usbus5: EHCI version 1.0 usbus5 on ehci1 pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ata1: <ATA channel> at channel 1 on atapci0 hdac0: <ATI SB600 HDA Controller> mem 0xfe8f4000-0xfe8f7fff irq 16 at device 20.2 on pci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci3: <ACPI PCI bus> on pcib3 ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe8f9000-0xfe8f9fff irq 18 at device 20.5 on pci0 usbus6 on ohci4 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcd7ff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] acpi_throttle0: <ACPI CPU Throttling> on cpu0 hwpstate0: <Cool`n'Quiet 2.0> on cpu0 Timecounters tick every 1.000 msec hdacc0: <Sigmatel STAC9221_A2 HDA CODEC> at cad 0 on hdac0 hdaa0: <Sigmatel STAC9221_A2 Audio Function Group> at nid 1 on hdacc0 pcm0: <Sigmatel STAC9221_A2 (Analog 2.0+HP/2.0)> at nid 13,10 and 11,21,12 on hdaa0 pcm1: <Sigmatel STAC9221_A2 (Rear Digital)> at nid 16 on hdaa0 pcm2: <Sigmatel STAC9221_A2 (Rear Analog Line-in)> at nid 15 on hdaa0 random: unblocking device. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 usbus6: 12Mbps Full Speed USB v1.0 ugen6.1: <ATI> at usbus6 uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen5.1: <ATI> at usbus5 uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 ugen4.1: <ATI> at usbus4 uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen3.1: <ATI> at usbus3 uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen2.1: <ATI> at usbus2 uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen1.1: <ATI> at usbus1 uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen0.1: <ATI> at usbus0 uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 (aprobe0:ahcich1:0:15:0): NOP. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 (aprobe0:ahcich1:0:15:0): CAM status: Command timeout (aprobe0:ahcich1:0:15:0): Error 5, Retries exhausted uhub0: 2 ports with 2 removable, self powered uhub6: 3 ports with 3 removable, self powered uhub5: 3 ports with 3 removable, self powered uhub3: 3 ports with 3 removable, self powered uhub2: 3 ports with 3 removable, self powered uhub1: 6 ports with 6 removable, self powered uhub4: 6 ports with 6 removable, self powered ugen2.2: <Cisco-Linksys> at usbus2 ugen0.2: <vendor 0x1ea7> at usbus0 ukbd0: <vendor 0x1ea7 2.4GHz Keyboard Mouse Combo, class 0/0, rev 1.10/2.00, addr 2> on usbus0 kbd2 at ukbd0 ahcich1: Timeout on slot 0 port 0 ahcich1: is 00000002 cs 00000000 ss 00000000 rs 00000001 tfd 50 serr 00000000 cmd 00046017 (aprobe0:ahcich1:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00 (aprobe0:ahcich1:0:0:0): CAM status: Command timeout (aprobe0:ahcich1:0:0:0): Error 5, Retry was blocked run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config ahcich1: Timeout on slot 0 port 0 ahcich1: is 00000002 cs 00000000 ss 00000000 rs 00000001 tfd 50 serr 00000000 cmd 00046017 (aprobe0:ahcich1:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00 (aprobe0:ahcich1:0:0:0): CAM status: Command timeout (aprobe0:ahcich1:0:0:0): Error 5, Retry was blocked SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! Timecounter "TSC" frequency 2095495336 Hz quality 800 cd0 at ata1 bus 0 scbus5 target 0 lun 0 cd0: <HL-DT-ST DVD-RAM GSA-H50N 1.00> Removable CD-ROM SCSI-0 device cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes) cd0: cd present [288875 x 2048 byte records] Trying to mount root from cd9660:/dev/iso9660/FREEBSD_INSTALL [ro]... From owner-freebsd-questions@FreeBSD.ORG Sat May 3 21:12:30 2014 Return-Path: <owner-freebsd-questions@FreeBSD.ORG> Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 64468940 for <questions@freebsd.org>; Sat, 3 May 2014 21:12:30 +0000 (UTC) Received: from relay.mailchannels.net (ar-005-i201.relay.mailchannels.net [162.253.144.83]) by mx1.freebsd.org (Postfix) with ESMTP id A0B211697 for <questions@freebsd.org>; Sat, 3 May 2014 21:12:28 +0000 (UTC) X-Sender-Id: _forwarded-from|107.201.34.133 Received: from mail-24.name-services.com (ip-10-227-128-69.us-west-2.compute.internal [10.227.128.69]) by relay.mailchannels.net (Postfix) with ESMTPA id E7E09600E4 for <questions@freebsd.org>; Sat, 3 May 2014 21:12:26 +0000 (UTC) X-Sender-Id: _forwarded-from|107.201.34.133 Received: from mail-24.name-services.com (mail-24.name-services.com [10.248.1.153]) (using TLSv1 with cipher AES128-SHA) by 0.0.0.0:2500 (trex/5.1.2); Sat, 03 May 2014 21:12:27 GMT X-MC-Relay: Forwarding X-MailChannels-SenderId: _forwarded-from%7C107.201.34.133 X-MailChannels-Auth-Id: demandmedia Received: from [10.0.10.1] (107-201-34-133.lightspeed.bcvloh.sbcglobal.net [107.201.34.133]) by mail-24.name-services.com with SMTP; Sat, 3 May 2014 14:12:19 -0700 Message-ID: <53655BB2.6010800@a1poweruser.com> Date: Sat, 03 May 2014 17:12:18 -0400 From: Fbsd8 <fbsd8@a1poweruser.com> User-Agent: Thunderbird 2.0.0.17 (Windows/20080914) MIME-Version: 1.0 To: questions <questions@FreeBSD.org> Subject: rc.conf jails not working in 10.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.17 Precedence: list List-Id: User questions <freebsd-questions.freebsd.org> List-Unsubscribe: <http://lists.freebsd.org/mailman/options/freebsd-questions>, <mailto:freebsd-questions-request@freebsd.org?subject=unsubscribe> List-Archive: <http://lists.freebsd.org/pipermail/freebsd-questions/>; List-Post: <mailto:freebsd-questions@freebsd.org> List-Help: <mailto:freebsd-questions-request@freebsd.org?subject=help> List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-questions>, <mailto:freebsd-questions-request@freebsd.org?subject=subscribe> X-List-Received-Date: Sat, 03 May 2014 21:12:30 -0000 My 9.2 rc.conf has a single jail defined. Copied those jail statements over to 10.0 rc.conf. The "service jail start jailname" commands issues some warning and the usage of the jail command. This used to work in 9.2 but don't work in 10.0. I thought 10.0 was suppose to work using the rc.conf or jail.conf method. Has rc.conf jail support been removed in 10.0?home | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1399135871.14503.YahooMailNeo>