Date: Mon, 11 Sep 2000 20:10:20 ICT From: "sakditorn sentong" <sakditorn_s@hotmail.com> To: freebsd-bugs@FreeBSD.ORG Message-ID: <F5lJ2HxYHLBQhExkiyP00008c8e@hotmail.com>
next in thread | raw e-mail | index | archive | help
I've sent the e-mail about my problem of running 2 freebsd servers on the
same network about a month ago. I can't figure it out yet. So, I desperately
need your help.
I already have one freebsd server running affectively. Since I tried to up a
second freebsd server. After the installation has been done. I used the
command ping to ping each other but I got the messages "ping: send to: Host
is down" back from them. However, when I used the command ping on both
server to ping another IPs on the network, it worked perfectly. I have
enclosed the output of "ifconfig -a" and "netstat -rn" for your attention.
:output of "netstat -rn"
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif
Expire
default 10.0.2.9 UGSc 36 2590565 fxp0
10.0.2/24 link#1 UC 0 0 fxp0
10.0.2.1 0:b4:c0:91:d2:9c UHLW 2 2654 lo0
10.0.2.2 0:8:c7:33:3e:2f UHLW 0 8361 fxp0 870
10.0.2.5 8:0:2b:86:e8:1d UHLW 1 57 fxp0 1195
10.0.2.7 0:50:ba:85:2e:9d UHLW 0 76 fxp0 1039
10.0.2.9 0:b0:c2:89:41:26 UHLW 35 0 fxp0 860
10.0.2.12 8:0:37:6:4a:a UHLW 1 26 fxp0 91
10.0.2.25 0:20:af:41:ad:94 UHLW 1 219 fxp0 763
10.0.2.41 0:d0:b7:7e:aa:c0 UHLW 0 190 fxp0 1183
10.0.2.43 0:d0:b7:9f:33:86 UHLW 0 68 fxp0 1114
10.0.2.62 0:0:86:41:de:5b UHLW 0 2196 fxp0 1147
10.0.2.64 0:50:ba:83:2d:7c UHLW 1 220 fxp0 812
10.0.2.71 0:d0:b7:9f:32:c6 UHLW 1 2916 fxp0 979
10.0.2.73 0:d0:b7:9f:33:8f UHLW 1 49111 fxp0 729
10.0.2.74 0:d0:b7:9f:36:d2 UHLW 0 299 fxp0 906
10.0.2.75 0:d0:b7:9f:35:a6 UHLW 1 252 fxp0 1146
10.0.2.88 0:50:ba:84:67:cf UHLW 1 2617 fxp0 1114
10.0.2.100 0:e0:18:18:62:14 UHLW 0 17 fxp0 683
127.0.0.1 127.0.0.1 UH 0 79 lo0
:output of ifconfig -a
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 10.0.2.1 netmask 0xffffff00 broadcast 10.0.2.255
ether 00:b4:c0:91:d2:9c
media: manual
supported media: manual
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
tun0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
the following is output from the second server
:output of "netstat -rn"
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif
Expire
default 10.0.2.9 UGSc 1 139 fxp0
10.0.2/24 link#1 UC 0 0 fxp0
10.0.2.1 link#1 UHRLW 0 12 fxp0
10.0.2.5 8:0:2b:86:e8:1d UHLW 0 3 fxp0 1192
10.0.2.8 0:b4:c0:91:d2:9c UHLW 0 72 lo0
10.0.2.9 0:b0:c2:89:41:26 UHLW 1 0 fxp0 1044
10.0.2.71 0:d0:b7:9f:32:c6 UHLW 0 4 fxp0 1156
10.0.2.74 0:d0:b7:9f:36:d2 UHLW 0 5 fxp0 1050
127.0.0.1 127.0.0.1 UH 1 26 lo0
:output of "ifconfig -a"
ifconfig -a
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 10.0.2.8 netmask 0xffffff00 broadcast 10.0.2.255
ether 00:b4:c0:91:d2:9c
media: manual
supported media: manual
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
tun0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
I also have attached the content of "rc.conf" of 2nd server for your
attention.
##############################################################
### Important initial Boot-time options #####################
##############################################################
swapfile="NO" # Set to name of swapfile if aux swapfile desired.
apm_enable="NO" # Set to YES if you want APM enabled.
pccard_enable="NO" # Set to YES if you want to configure PCCARD
devices.
pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address.
pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO).
local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script
dirs.
local_periodic="/usr/local/etc/periodic /usr/X11R6/etc/periodic" # periodic
scri
pt dirs
##############################################################
### Network configuration sub-section ######################
##############################################################
### Basic network options: ###
hostname="gundam.popidols.net" # Set this!
nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
firewall_enable="NO" # Set to YES to enable firewall
functionality
firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
firewall_quiet="NO" # Set to YES to suppress rule display
natd_enable="NO" # Enable natd (if firewall_enable == YES).
natd_interface="fxp0" # Public interface to use with natd.
natd_flags="" # Additional flags for natd.
tcp_extensions="NO" # Disallow RFC1323 extensions (or YES).
firewall_quiet="NO" # Set to YES to suppress rule display
natd_enable="NO" # Enable natd (if firewall_enable == YES).
natd_interface="fxp0" # Public interface to use with natd.
natd_flags="" # Additional flags for natd.
tcp_extensions="NO" # Disallow RFC1323 extensions (or YES).
pback)._interfaces="fxp0 lp0 lo0" # List of network interfaces (lo0 is
loo
ifconfig_lp0="inet 10.0.2.8 netmask 255.255.255.0"
ifconfig_fxp0="inet 10.0.2.8 netmask 255.255.255.0"
ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias
entry.
### Network daemon (miscellaneous) & NFS options: ###
syslogd_enable="YES" # Run syslog daemon (or NO).
syslogd_flags="" # Flags to syslogd (if enabled).
inetd_enable="YES" # Run the network daemon dispatcher (or NO).
inetd_flags="" # Optional flags to inetd.
named_enable="NO" # Run named, the DNS server (or NO).
named_program="named" # path to named, if you want a different
one.
kadmind_server_enable="NO" # a slave kerberos serverdo not run on
kerberos_stash="" # Is the kerberos master key stashed?
rwhod_enable="NO" # Run the rwho daemon (or NO).
amd_enable="NO" # Run amd service with $amd_flags (or NO).
amd_flags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host
/etc/amd.map"
amd_map_program="NO" # Can be set to "ypcat -k amd.master"
nfs_client_enable="YES" # This host is an NFS client (or NO).
nfs_client_flags="-n 4" # Flags to nfsiod (if enabled).
nfs_server_enable="YES" # This host is an NFS server (or NO).
nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
mountd_flags="-r" # Flags to mountd (if NFS server enabled).
nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if
nfs_server.
rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO).
portmap_enable="YES" # Run the portmapper service (or NO).
portmap_flags="" # Flags to portmap (if enabled).
rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
keyserv_flags="" # Flags to keyserv (if enabled).
rarpd_enable="NO" # Run rarpd (or NO).
rarpd_flags="" # Flags to rarpd.
xtend_enable="NO" # Run the X-10 power controller daemon.
xtend_flags="" # Flags to xtend (if enabled).
### Network Time Services options: ###
timed_enable="NO" # Run the time daemon (or NO).
timed_flags="" # Flags to timed (if enabled).
ntpdate_enable="NO" # Run the ntpdate to sync time (or NO).
ntpdate_program="ntpdate" # path to ntpdate, if you want a different
one.
ntpdate_flags="" # Flags to ntpdate (if enabled).
xntpd_enable="NO" # Run xntpd Network Time Protocol (or NO).
xntpd_program="xntpd" # path to xntpd, if you want a different
one.
xntpd_flags="-p /var/run/xntpd.pid" # Flags to xntpd (if enabled).
# Network Information Services (NIS) options: ###
nis_client_enable="NO" # We're an NIS client (or NO).
nis_client_flags="" # Flags to ypbind (if enabled).
nis_ypset_enable="NO" # Run ypset at boot time (or NO).
nis_ypset_flags="" # Flags to ypset (if enabled).
nis_server_enable="NO" # We're an NIS server (or NO).
nis_server_flags="" # Flags to ypserv (if enabled).
nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
### Network routing options: ###
defaultrouter="10.0.2.9" # Set to default gateway (or NO).
static_routes="" # Set to static route list (or leave empty).
I'm looking forward to hearing from you.
Thank you very much.
sakditorn.
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?F5lJ2HxYHLBQhExkiyP00008c8e>