Date: Mon, 1 Aug 2011 19:34:23 -0400 From: Brenden Blosser <bsbmusic@comcast.net> To: freebsd-wireless@freebsd.org Subject: Atheros AR9285 Message-ID: <38A316D5-449B-40D1-B47A-75EC9752AF06@comcast.net>
index | next in thread | raw e-mail
Hi. I've been trying to figure this out for the longest time now. My laptop has a Atheros AR9285 wireless card in it currently but when I try to connect to my wireless network or run "ifconfig wlan0 up scan" I see in return:
ath0: hardware error; resetting
ath0: 0x00000000 0x00002000 0x00000000, 0x00000000 0x00000000 0x00000000
But it shows it's status as "associated" with my wireless network but there is no network access in anyway (Can't even ping 192.168.1.1).
I'm providing all informational outputs below:
uname -a:
FreeBSD oxygen.hsd1.md.comcast.net. 8.2-STABLE-201105 FreeBSD 8.2-STABLE-201105 #0: Tue May 17 05:18:48 UTC 2011 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
ifconfig wlan0:
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 4c:0f:6e:33:d8:93
inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
media: IEEE 802.11 Wireless Ethernet OFDM/36Mbps mode 11g
status: associated
ssid NETWORK-HERE channel 6 (2437 MHz 11g) bssid c0:c1:c0:75:31:22
regdomain 96 indoor ecm authmode WPA2/802.11i privacy ON
deftxkey UNDEF TKIP 2:128-bit txpower 20 bmiss 7 scanvalid 450 bgscan
bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS
wme burst roaming MANUAL
pciconf -lv:
ath0@pci0:2:0:0: class=0x028000 card=0x3040103c chip=0x002b168c rev=0x01 hdr=0x00
vendor = 'Atheros Communications Inc.'
device = 'Atheros AR9285 Wireless LAN 802.11 a/b/g/n Controller (AR928x)'
class = network
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?38A316D5-449B-40D1-B47A-75EC9752AF06>