Date: Sat, 02 Dec 2000 22:25:07 -0500 From: trini0 <trini0@optonline.net> To: FreeBSD Hardware <hardware@freebsd.org> Subject: Cold boot & FBSD 4.2S Message-ID: <3A29BD13.AFE8BE68@optonline.net>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------6C3E5CBB35AC07B237761B9D Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit <!doctype html public "-//w3c//dtd html 4.0 transitional//en"> <html> <br>Hey all, I have a P200 w/ 32M of ram, adaptec 2940 card with a seagate 1G drive, Intel 100B & SMC Elite 16 WD8013 nics, on a motherboard w/ 430 HX chipset. She used to run fine under 4.1.1. Now I got problems with 4.2S. I noticed that during a cold boot, about after detection of the keyboard, the system goes into a tail spin, and I cant figure out what the error message is. If I were to hit the reset button or Ctrl-Alt-Del and let the system boot up again (warm boot), everything is fine..... <br>I noticed in the list that people were having warm boot problems. Im the total opposite. Other than that she hums like a bird (or fans and harddrives which ever suits you). Has anyone heard of this, and know of a solution? I have done the buildworld process twice, so from what I understand, taxes the system and I have no problems there. I have included my config file and dmesg. <br>Thanks <br> <pre>-- _____________________________ | trini0 | | | / ) | Systems Administrator | / / | Network Engineer | ( ( | email ==> | (((\ \> |/ ) trini0@optonline.net | (\\\\ \_/ /_________________________| \ / \ _/ / / / /</pre> <p> </html> --------------6C3E5CBB35AC07B237761B9D Content-Type: text/plain; charset=us-ascii; name="dmesg.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.txt" Dec 2 19:15:11 gw /kernel: Copyright (c) 1992-2000 The FreeBSD Project. Dec 2 19:15:11 gw /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Dec 2 19:15:11 gw /kernel: The Regents of the University of California. All rights reserved. Dec 2 19:15:11 gw /kernel: FreeBSD 4.2-STABLE #0: Sat Dec 2 00:30:43 EST 2000 Dec 2 19:15:11 gw /kernel: root@gw.example.net:/usr/obj/usr/src/sys/GW Dec 2 19:15:11 gw /kernel: Timecounter "i8254" frequency 1193182 Hz Dec 2 19:15:11 gw /kernel: Timecounter "TSC" frequency 199310324 Hz Dec 2 19:15:11 gw /kernel: CPU: Pentium/P54C (199.31-MHz 586-class CPU) Dec 2 19:15:11 gw /kernel: Origin = "GenuineIntel" Id = 0x52c Stepping = 12 Dec 2 19:15:11 gw /kernel: Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> Dec 2 19:15:11 gw /kernel: real memory = 33554432 (32768K bytes) Dec 2 19:15:11 gw /kernel: avail memory = 29986816 (29284K bytes) Dec 2 19:15:11 gw /kernel: Preloaded elf kernel "kernel" at 0xc02ce000. Dec 2 19:15:11 gw /kernel: Preloaded userconfig_script "/boot/kernel.conf" at 0xc02ce09c. Dec 2 19:15:11 gw /kernel: Intel Pentium detected, installing workaround for F00F bug Dec 2 19:15:11 gw /kernel: md0: Malloc disk Dec 2 19:15:11 gw /kernel: npx0: <math processor> on motherboard Dec 2 19:15:11 gw /kernel: npx0: INT 16 interface Dec 2 19:15:11 gw /kernel: pcib0: <Host to PCI bridge> on motherboard Dec 2 19:15:11 gw /kernel: pci0: <PCI bus> on pcib0 Dec 2 19:15:11 gw /kernel: isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0 Dec 2 19:15:11 gw /kernel: isa0: <ISA bus> on isab0 Dec 2 19:15:11 gw /kernel: pci0: <Intel PIIX3 ATA controller> at 7.1 Dec 2 19:15:11 gw /kernel: pci0: <S3 ViRGE graphics accelerator> at 17.0 irq 15 Dec 2 19:15:11 gw /kernel: ahc0: <Adaptec 2940 SCSI adapter> port 0x6000-0x60ff mem 0xe4101000-0xe4101fff irq 9 at device 18.0 on pci0 Dec 2 19:15:11 gw /kernel: aic7870: Single Channel A, SCSI Id=7, 16/255 SCBs Dec 2 19:15:11 gw /kernel: fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x6500-0x651f mem 0xe4000000-0xe40fffff,0xe4100000-0xe4100fff irq 12 at device 20.0 on pci0 Dec 2 19:15:11 gw /kernel: fxp0: Ethernet address 00:80:29:12:9c:20 Dec 2 19:15:11 gw /kernel: fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 Dec 2 19:15:12 gw /kernel: fdc0: FIFO enabled, 8 bytes threshold Dec 2 19:15:12 gw /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Dec 2 19:15:12 gw /kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 Dec 2 19:15:12 gw /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 Dec 2 19:15:12 gw /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Dec 2 19:15:12 gw /kernel: sc0: <System console> at flags 0x100 on isa0 Dec 2 19:15:12 gw /kernel: sc0: VGA <16 virtual consoles, flags=0x300> Dec 2 19:15:12 gw /kernel: ed0 at port 0x300-0x31f iomem 0xd8000-0xdbfff irq 10 on isa0 Dec 2 19:15:12 gw /kernel: ed0: address 00:00:c0:29:52:48, type WD8013EPC (16 bit) Dec 2 19:15:12 gw /kernel: IP Filter: v3.4.8 initialized. Default = pass all, Logging = enabled Dec 2 19:15:12 gw /kernel: Waiting 5 seconds for SCSI devices to settle Dec 2 19:15:12 gw /kernel: Mounting root from ufs:/dev/da0s1a Dec 2 19:15:12 gw /kernel: da0 at ahc0 bus 0 target 0 lun 0 Dec 2 19:15:12 gw /kernel: da0: <SEAGATE ST11200N SUN1.05 9400> Fixed Direct Access SCSI-2 device Dec 2 19:15:12 gw /kernel: da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled Dec 2 19:15:12 gw /kernel: da0: 1005MB (2059140 512 byte sectors: 64H 32S/T 1005C) Dec 2 19:15:12 gw ntpd[143]: ntpd 4.0.99b Fri Dec 1 16:28:56 EST 2000 (1) Dec 2 19:15:12 gw ntpd[143]: using kernel phase-lock loop 2040 Dec 2 19:15:13 gw ntpd[143]: using kernel phase-lock loop 2041 Dec 2 19:15:20 gw login: ROOT LOGIN (root) ON ttyv0 Dec 2 19:19:48 gw ntpd[143]: time reset 0.671924 s Dec 2 19:19:48 gw ntpd[143]: kernel pll status change 2041 --------------6C3E5CBB35AC07B237761B9D Content-Type: text/plain; charset=us-ascii; name="GW" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="GW" # # GW -- Gateway/Firewall machine running FreeBSD ;) # Maintained by Greg Samson 11-17-00 machine i386 cpu I586_CPU ident GW maxusers 32 options INET #InterNETworking options IPFILTER options IPFILTER_LOG #options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required #options MSDOSFS #MSDOS Filesystem options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options CPU_FASTER_5X86_FPU device isa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 # SCSI Controllers device ahc # AHA2940 and onboard AIC7xxx devices # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 #device psm0 at atkbdc? irq 12 device vga0 at isa? # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # PCI Ethernet NICs. device fxp # Intel EtherExpress PRO/100B (82557, 82558) # ISA Ethernet NICs. device ed0 at isa? port 0x300 irq 10 iomem 0xd8000 # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter --------------6C3E5CBB35AC07B237761B9D-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3A29BD13.AFE8BE68>