Date: Thu, 26 Jan 2006 16:21:53 -0500 From: "Joshua Coombs" <jcoombs@gwi.net> To: freebsd-stable@freebsd.org Subject: Adaptec SCSI going nuts Message-ID: <drbehj$dl$1@sea.gmane.org>
next in thread | raw e-mail | index | archive | help
Just got a dual Opteron system to play with amd64 builds of FreeBSD.
Poking around to see how it behaived, I initially tossed FreeBSD 4.11
on it, and was surprised to see a dump of the scsi controller state at
the end of the dmesg. Tried 6.0-Rel, both x86 and amd64, same
behavior. Bumped up to 6-stable from yesterday, same behavior. After
the dump, the system appears solid, no other errors, so I'm guessing
it's just a problem with how the card is initialized, FreeBSD corrects
it and moves on.
Should I be more concerned, or consider it a quirk of the machine?
Joshua Coombs
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights
reserved.
FreeBSD 6.0-RELEASE-p4 #0: Thu Jan 26 15:55:58 EST 2006
root@testbed.gwi.net:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 246 (1994.67-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0xf5a Stepping = 10
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory = 1073676288 (1023 MB)
avail memory = 1024929792 (977 MB)
ACPI APIC Table: <A M I OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 9 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 15 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci3: <ACPI PCI bus> on pcib1
pci3: <display, VGA> at device 6.0 (no driver attached)
fxp0: <Intel 82551 Pro/100 Ethernet> port 0xbc00-0xbc3f mem
0xfeafb000-0xfeafbfff,0xfeaa0000-0xfeabffff irq 18 at device 8.0 on
pci3
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:e0:81:34:64:da
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on
pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 7.2 (no driver attached)
pci0: <bridge> at device 7.3 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port
0x8000-0x80ff,0x7800-0x78ff mem 0xfc8fc000-0xfc8fdfff irq 24 at device
6.0 on pci2
ahd0: [GIANT-LOCKED]
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port
0x8800-0x88ff,0x8400-0x84ff mem 0xfc8fe000-0xfc8fffff irq 25 at device
6.1 on pci2
ahd1: [GIANT-LOCKED]
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem
0xfc8b0000-0xfc8bffff,0xfc8a0000-0xfc8affff irq 24 at device 9.0 on
pci2
miibus1: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus1
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: Ethernet address: 00:e0:81:34:65:28
bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem
0xfc8e0000-0xfc8effff,0xfc8d0000-0xfc8dffff irq 25 at device 9.1 on
pci2
miibus2: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus2
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge1: Ethernet address: 00:e0:81:34:65:29
pci0: <base peripheral, interrupt controller> at device 10.1 (no
driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci1: <ACPI PCI bus> on pcib3
pci0: <base peripheral, interrupt controller> at device 11.1 (no
driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
on acpi0
sio0: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq
2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
acd0: CDROM <GCR-8525B/1.02> at ata0-slave PIO4
ahd0: Invalid Sequencer interrupt occurred.
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x23c Mode 0x0
Card was paused
INTSTAT[0x0] SELOID[0x1] SELID[0x0] HS_MAILBOX[0x0]
INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0]
SEQINTCTL[0x6]:(INTMASK1|INTMASK2)
SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x2]
KERNEL_QFREEZE_COUNT[0x2] MK_MESSAGE_SCB[0xff00]
MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0]
LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0]
LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0xe NEXTSCB
0xff40
qinstart = 28 qinfifonext = 28
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 15 14 1 2 3 4 5 6 7 8 9 10 11 12 13 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x8000, SCB 0xf
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
ahd0: FIFO1 Free, LONGJMP == 0x8063, SCB 0xe
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0xf 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
ahd0: REG0 == 0x8f60, SINDEX = 0x10e, DINDEX = 0x104
ahd0: SCBPTR == 0xf, SCB_NEXT == 0xff40, SCB_NEXT2 == 0xe
CDB 12 20 0 80 88 e6
STACK: 0x237 0x2 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0
0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0
Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0
0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0
SMP: AP CPU #1 Launched!
da0 at ahd0 bus 0 target 0 lun 0
da0: <SEAGATE ST336807LC 0C01> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged
Queueing Enabled
da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
da1 at ahd0 bus 0 target 1 lun 0
da1: <SEAGATE ST336807LC 0C01> Fixed Direct Access SCSI-3 device
da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged
Queueing Enabled
da1: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
Trying to mount root from ufs:/dev/da0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?drbehj$dl$1>