Date: Sat, 29 Jul 2000 11:22:52 +0200 (SAT) From: John Hay <jhay@icomtek.co.za> To: peter@netplex.com.au (Peter Wemm) Cc: groudier@club-internet.fr, cvs-committers@freebsd.org, cvs-all@freebsd.org Subject: Re: cvs commit: src/release/scripts dokern.sh Message-ID: <200007290922.e6T9Mqc78590@zibbi.mikom.csir.co.za> In-Reply-To: <200007282048.NAA49823@netplex.com.au> from Peter Wemm at "Jul 28, 2000 01:48:11 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
>
> > * Remove the `ncr' driver in the Alpha case -- the `sym' driver works with
> > every known Alpha.
>
> I think it is time to switch -current to sym-only. No disrespect towards the
> ncr driver writer intended, but the sym driver is well maintained, robust,
> up-to-date, not implicated in the recurring fxp+ncr bugs, and supports all
> the hardware.
It does not support all hardware yet. I have an old 810 card that don't
even want to boot using the sym driver. It just go into a loop of printing
errors at the stage where it should probe the disks. The same machine
works just fine with the ncr driver.
John
--
John Hay -- John.Hay@icomtek.csir.co.za
Console: serial port
BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS drive D: is disk2
BIOS 639kB/31744kB available memory
FreeBSD/i386 bootstrap loader, Revision 0.8
(jhay@angel.cids.org.za, Sun Jul 16 17:19:03 SAST 2000)
Loading /boot/defaults/loader.conf
/kernel text=0x152b2a data=0x1f864+0x20af4 syms=[0x4+0x24150+0x4+0x29aea]
-
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [kernel] in 8 seconds...
Type '?' for a list of commands, 'help' for more detailed help.
ok boot -v
SMAP type=01 base=00000000 00000000 len=00000000 0009fc00
SMAP type=01 base=00000000 0009fc00 len=00000000 00000400
SMAP type=02 base=00000000 000f0000 len=00000000 00010000
SMAP type=01 base=00000000 00100000 len=00000000 01f00000
SMAP type=02 base=00000000 fec00000 len=00000000 00001000
SMAP type=02 base=00000000 fee00000 len=00000000 00001000
SMAP type=02 base=00000000 ffff0000 len=00000000 00010000
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #2: Sat Jul 29 09:04:15 SAST 2000
jhay@angel.cids.org.za:/usr/src/sys/compile/TOBY
Calibrating clock(s) ... TSC clock: 89997030 Hz, i8254 clock: 1193144 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 80678965 Hz
CPU: Pentium/P54C (80.68-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping = 5
Features=0x3bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC>
real memory = 33554432 (32768K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x002fc000 - 0x01ff7fff, 30392320 bytes (7420 pages)
avail memory = 29954048 (29252K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fa520
bios32: Entry = 0xfa850 (c00fa850) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xa880
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc02e3000.
Intel Pentium detected, installing workaround for F00F bug
mem: <memory & I/O>
random: <entropy source>
nulldev: <null device, zero device>
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 59435364 bytes/sec
bzero() bandwidth = 29901623 bytes/sec
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x04a3, revid=0x11
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x0482, revid=0x04
class=00-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x5333, dev=0x88f0, revid=0x00
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base f0000000, size 25, enabled
found-> vendor=0x1000, dev=0x0001, revid=0x01
class=00-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=12
map[10]: type 4, range 32, base 00006000, size 8, enabled
map[14]: type 1, range 32, base f2000000, size 8, enabled
pci0: <PCI bus> on pcib0
pci0: <Intel 82434NX (Neptune) PCI cache memory controller> (vendor=0x8086, dev=0x04a3) at 0.0
isab0: <Intel 82375EB PCI-EISA bridge> at device 2.0 on pci0
eisa0: <EISA bus> on isab0
mainboard0: <INT0000 (System Board)> on eisa0 slot 0
isa0: <ISA bus> on isab0
pci0: <S3 968 graphics accelerator> (vendor=0x5333, dev=0x88f0) at 3.0 irq 11
sym0: <810> port 0x6000-0x60ff mem 0xf2000000-0xf20000ff irq 12 at device 4.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: open drain IRQ line driver
sym0: using NCR-generic firmware.
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc-: sc0 exists, using next available unit number
vga-: vga0 exists, using next available unit number
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 04 b0 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
atkbd: the current kbd controller command byte 0045
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
atkbd: keyboard ID 0xffffffff (1)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000
ata0: mask=00 status0=ff status1=ff
ata0: probe allocation failed
ata0 failed to probe at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000
psm0: current command byte:0045
kbdc: TEST_AUX_PORT status:0001
psm0: strange result for test aux port (1).
kbdc: RESET_AUX return code:ffffffff
kbdc: RESET_AUX return code:ffffffff
kbdc: RESET_AUX return code:ffffffff
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
ed0 at port 0x280-0x29f iomem 0xd8000-0xdbfff irq 5 on isa0
bpf: ed0 attached
ed0: address 00:00:c0:d3:de:d6, type SMC8216/SMC8216C (16 bit)
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
gusc0 failed to probe at port 0x220 irq 5 drq 1 flags 0x13 on isa0
ppc0: parallel port found at 0x378
ppc0: This ppc chipset does not support the extended I/O port range...no problem
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37b irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
sc1: no video adapter is found.
sc1: <System console> failed to probe on isa0
sio0: irq maps: 0x1041 0x1051 0x1041 0x1041
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16450, console
sio1: irq maps: 0x1041 0x1049 0x1041 0x1041
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16450
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000).
sym0: script cmd = 808cfd02
sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff.
sym0: PCI STATUS = 0x8100
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe cvs-all" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200007290922.e6T9Mqc78590>