Date: Wed, 18 Jul 2007 21:30:16 GMT From: Laurent Frigault <lfrigault@agneau.org> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/79143: [ipmi] Broadcom NIC driver do not work for IPMI Message-ID: <200707182130.l6ILUG1L037046@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/79143; it has been noted by GNATS. From: Laurent Frigault <lfrigault@agneau.org> To: bug-followup@FreeBSD.org Cc: Subject: Re: kern/79143: [ipmi] Broadcom NIC driver do not work for IPMI Date: Wed, 18 Jul 2007 23:04:15 +0200 --Nq2Wo0NMKNjxTN9z Content-Type: text/plain; charset=iso-8859-15 Content-Disposition: inline I just reproduce the same problem under 6.2-RELEASE-p6 . The server is a DELL PowerEdge 860 . Please find a dmesg output . There is an other bug with this driver (bge0: <Broadcom BCM5750 B1, ASIC rev. 0x4101>) After the boot, the interface is UP without any error but not working. It needs an "ifconfig bge0 down;ifconfig bge0 up" to start working. It looks like the card was not fully initialized before binding the IP ont it. Those 2 problems exist on 2 servers (same hardware). Maybe are the two bugs related. Regards, -- Laurent Frigault | <url:http://www.agneau.org/>; UNIX _IS_ user friendly. It's just selective about who its friends are. --Nq2Wo0NMKNjxTN9z Content-Type: text/plain; charset=iso-8859-15 Content-Disposition: attachment; filename=dmesg Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE-p6 #0: Wed Jul 18 11:52:56 CEST 2007 root@XXXXX:/usr/src/sys/i386/compile/SMP Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) D CPU 3.00GHz (3000.12-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf65 Stepping = 5 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe49d<SSE3,RSVD2,MON,DS_CPL,EST,CNTX-ID,CX16,<b14>,<b15>> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 real memory = 2147221504 (2047 MB) avail memory = 2096107520 (1999 MB) ACPI APIC Table: <DELL PE_SC3 > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <DELL PE_SC3> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <PCI-PCI bridge> at device 0.0 on pci1 pci2: <PCI bus> on pcib2 mpt0: <LSILogic SAS/SATA Adapter> port 0xec00-0xecff mem 0xfe9fc000-0xfe9fffff,0xfe9e0000-0xfe9effff irq 16 at device 8.0 on pci2 mpt0: [GIANT-LOCKED] mpt0: MPI Version=1.5.13.0 mpt0: mpt_cam_event: 0x16 mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). mpt0: mpt_cam_event: 0x12 mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required). mpt0: mpt_cam_event: 0x12 mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required). mpt0: mpt_cam_event: 0x16 mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). mpt0: mpt_cam_event: 0xb mpt0: Unhandled Event Notify Frame. Event 0xb (ACK not required). pci1: <base peripheral, interrupt controller> at device 0.1 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0 pci4: <ACPI PCI bus> on pcib4 bge0: <Broadcom BCM5750 B1, ASIC rev. 0x4101> mem 0xfe5f0000-0xfe5fffff irq 16 at device 0.0 on pci4 miibus0: <MII bus> on bge0 brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:18:8b:f9:af:59 pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0 pci5: <ACPI PCI bus> on pcib5 bge1: <Broadcom BCM5750 B1, ASIC rev. 0x4101> mem 0xfe3f0000-0xfe3fffff irq 17 at device 0.0 on pci5 miibus1: <MII bus> on bge1 brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: Ethernet address: 00:18:8b:f9:af:5a uhci0: <UHCI (generic) USB controller> port 0xace0-0xacff irq 20 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xacc0-0xacdf irq 21 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0xaca0-0xacbf irq 22 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfeb00000-0xfeb003ff irq 20 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: wrong number of companions (7 != 3) usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered uhub4: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2 uhub4: multiple transaction translators uhub4: 4 ports with 4 removable, self powered ukbd0: Dell Dell USB Keyboard, rev 1.10/3.01, addr 3, iclass 3/1 kbd2 at ukbd0 pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci6: <ACPI PCI bus> on pcib6 pci6: <display, VGA> at device 5.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xec000-0xeffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec acd0: CDROM <HL-DT-ST GCR-8240N/1.10> at ata0-master UDMA33 da0 at mpt0 bus 0 target 0 lun 0 da0: <Dell VIRTUAL DISK 1028> Fixed Direct Access SCSI-5 device da0: 300.000MB/s transfers, Tagged Queueing Enabled da0: 151634MB (310546432 512 byte sectors: 255H 63S/T 19330C) SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/da0s1a ukbd0: at uhub4 port 1 (addr 3) disconnected ukbd0: detached --Nq2Wo0NMKNjxTN9z--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200707182130.l6ILUG1L037046>