Date: Mon, 8 Mar 2010 14:01:48 +0200 From: Dan Naumov <dan.naumov@gmail.com> To: Jeremy Chadwick <freebsd@jdc.parodius.com>, FreeBSD-STABLE Mailing List <freebsd-stable@freebsd.org>, freebsd-questions@freebsd.org, Attilio Rao <attilio@freebsd.org> Subject: RE: powerd on 8.0, is it considered safe? Message-ID: <cf9b1ee01003080401g1cad0a4g3306676a0de4e724@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Okay, now I am baffled. Up until this point, I wasn't using powerd on this new Atom D510 system. I ran sysctl and noticed that dev.cpu.0.freq: is actually 1249 and doesn't change no matter what kind of load the system is under. If I boot to BIOS, under BIOS CPU is shown as 1,66 Ghz. Okayy... I guess this explains why my buildworld and buildkernel took over 5 hours if by default, it gets stuck at 1249 Mhz for no obvious reason. I enabled powerd and now according to dev.cpu.0.freq:, the system is permanently stuck at 1666 Mhz, regardless of whether the system is under load or not. atombsd# uname -a FreeBSD atombsd.localdomain 8.0-RELEASE-p2 FreeBSD 8.0-RELEASE-p2 #0: Tue Jan 5 21:11:58 UTC 2010 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 atombsd# kenv | grep smbios.planar.product smbios.planar.product="X7SPA-H" atombsd# sysctl dev.cpu dev.est dev.cpufreq dev.p4tcc debug.cpufreq kern.timecounter dev.cpu.0.%desc: ACPI CPU dev.cpu.0.%driver: cpu dev.cpu.0.%location: handle=\_PR_.P001 dev.cpu.0.%pnpinfo: _HID=none _UID=0 dev.cpu.0.%parent: acpi0 dev.cpu.0.freq: 1666 dev.cpu.0.freq_levels: 1666/-1 1457/-1 1249/-1 1041/-1 833/-1 624/-1 416/-1 208/-1 dev.cpu.0.cx_supported: C1/0 dev.cpu.0.cx_lowest: C1 dev.cpu.0.cx_usage: 100.00% last 500us dev.cpu.1.%desc: ACPI CPU dev.cpu.1.%driver: cpu dev.cpu.1.%location: handle=\_PR_.P002 dev.cpu.1.%pnpinfo: _HID=none _UID=0 dev.cpu.1.%parent: acpi0 dev.cpu.1.cx_supported: C1/0 dev.cpu.1.cx_lowest: C1 dev.cpu.1.cx_usage: 100.00% last 500us dev.cpu.2.%desc: ACPI CPU dev.cpu.2.%driver: cpu dev.cpu.2.%location: handle=\_PR_.P003 dev.cpu.2.%pnpinfo: _HID=none _UID=0 dev.cpu.2.%parent: acpi0 dev.cpu.2.cx_supported: C1/0 dev.cpu.2.cx_lowest: C1 dev.cpu.2.cx_usage: 100.00% last 500us dev.cpu.3.%desc: ACPI CPU dev.cpu.3.%driver: cpu dev.cpu.3.%location: handle=\_PR_.P004 dev.cpu.3.%pnpinfo: _HID=none _UID=0 dev.cpu.3.%parent: acpi0 dev.cpu.3.cx_supported: C1/0 dev.cpu.3.cx_lowest: C1 dev.cpu.3.cx_usage: 100.00% last 500us sysctl: unknown oid 'dev.est' Right. So how do I investigate why does the CPU get stuck at 1249 Mhz after boot by default when not using powerd and why it gets stuck at 1666 Mhz with powerd enabled and doesn't scale back down when IDLE? Out of curiosity, I stopped powerd but the CPU remained at 1666 Mhz. - Sincerely, Dan Naumov
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?cf9b1ee01003080401g1cad0a4g3306676a0de4e724>