Date: Sun, 19 Nov 2000 11:20:49 -0700 From: Stacy Millions <stacy@millions.ca> To: Jonas Bulow <jonas.bulow@servicefactory.se>, freebsd-mobile@FreeBSD.ORG Subject: Re: KME PC Card SCSI adapter Message-ID: <3A181A01.8E1A62D7@Millions.CA> References: <3A069815.7BC4FB90@servicefactory.se>
next in thread | previous in thread | raw e-mail | index | archive | help
Jonas Bulow wrote:
> I have a HP-m820e CD-writer.
I have the same
> "KME" "SCSI-CARD-001"
ditto
> Does anybody know anything about this SCSI-card and if it's possible to
> get it work with FreeBSD?
I have good news and I have bad news:
The good news is, with the recently committed nsp driver,
the following line in my kernel config
device nsp
and the following entry in /etc/pccard.conf
card "KME" "SCSI-CARD-001"
config auto "nsp" ?
I get the following dmesg output
nsp0 at port 0x240-0x24f iomem 0xd0000-0xd0fff irq 3 slot 0 on pccard0
nsp0: try to reset scsi bus
SCSI_LOW_ATTENTION(msgout): 0x40
cd0 at nsp0 bus 0 target 1 lun 0
cd0: <hp CD-Writer+ M820 1.23> Removable CD-ROM SCSI-2 device
cd0: cd present [275167 x 2048 byte records]
SCSI_LOW_ATTENTION(msgout): 0x40
and I have a functional cd-r device! Just remember, the dip switch on
the card has to be in the 16bit position.
The bad news is, I recently bought a 1460 on eBay :-)
-stacy
--
Nothing spoils fun like finding out it builds character.
- Calvin
Stacy Millions stacy@millions.ca
Millions Consulting Limited
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3A181A01.8E1A62D7>