Date: Thu, 2 May 2002 11:21:34 -0700 (PDT) From: bruno@tinkerbox.org To: stable@freebsd.org Cc: bruno@tinkerbox.org Subject: 4.5 stable freezes on p200 Message-ID: <Pine.BSF.4.21.0205021111400.96506-100000@mail.dvart.com>
next in thread | raw e-mail | index | archive | help
I have that p200 machine running 4.2 that I am trying to update to 4.5
I build the world and kernel on a different machine (because it is so
slow, and some files seemed to have been corrupted so I can not
buildworld locally), then mounted /usr/src /usr/obj on the p200 and make
installkernel there.
The resulting kernel freezes on the p200. It gets to the little rotating
dash and freezes after displaying the first -
nothing gets in /var/log/messages
I can load the old kernel from the boot loader prompt, and boot it, no
problem...
I tried a generic build without all the hardware I do not have, same
results
The p200 motherboard is a PCISA single-board computer from IPC.
if anyone has any idea on what I can try... please let me know !
bruno
here is the dmesg from the working 4.2 kernel:
FreeBSD 4.2-RELEASE #2: Sun Dec 10 14:15:44 PST 2000
bruno@router.bschwand.net:/usr/src/sys/compile/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 200456703 Hz
CPU: Pentium/P55C (200.46-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 132120576 (129024K bytes)
avail memory = 125050880 (122120K bytes)
Preloaded elf kernel "kernel.001" at 0xc0390000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 5591 ATA33 controller> port
0x4000-0x400f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 irq 14 at
device 1.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
vx0: <3COM 3C595 Fast Etherlink III PCI> port 0xe000-0xe01f irq 11 at
device 8.0 on pci0
utp/tx[*utp*]: disable 'auto select' with DOS util! address
00:60:97:ac:21:37
vx0: driver is using old-style compatability shims
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xe400-0xe43f irq 10 at device
10.0 on pci0
xl0: Ethernet address: 00:60:97:92:49:c8
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <SiS 5597/98 SVGA controller> at 20.0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IP packet filtering initialized, divert enabled, rule-based forwarding
disabled, default to deny, unlimited logging
ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0205021111400.96506-100000>