Date: Wed, 29 Jan 97 02:36:30 +0100 From: Jean-Marc Zucconi <jmz@cabri.obs-besancon.fr> To: hardware@freebsd.org Subject: ET3000 + AHA 1542B Message-ID: <9701290136.AA08460@cabri.obs-besancon.fr>
next in thread | raw e-mail | index | archive | help
Hi,
Is there a known incompatibility between those 2 boards? I have a
machine which will not boot with an et3000 vga card and an adaptec
1542B. The machine locks after
aha0: Rev 41 (AHA-154x[AB]) V0.5, enabling residuals, target ops
aha0: reading board settings, dma=5 int=12 id=7 (bus speed defaulted)
aha0 at 0x330-0x333 irq 12 drq 5 on isa
aha0 waiting for scsi devices to settle
The led on the adaptec stay on and I have to use the power swich to
reset the machine. Booting with only the adaptec works, booting with
only the et3000 works. I have tried 2 differents IRQs (11 and 12) for
the 1542 with no luck. Moving the cards in different slots does not
help either.
Any idea?
Jean-Marc
_____________________________________________________________________________
Jean-Marc Zucconi Observatoire de Besancon F 25010 Besancon cedex
PGP Key: finger jmz@cabri.obs-besancon.fr
=============================================================================
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9701290136.AA08460>