Date: Fri, 12 Mar 2010 19:21:34 +0100 From: Pierre Beyssac <pb@freebsd.org> To: Pyun YongHyeon <pyunyh@gmail.com> Cc: freebsd-stable@freebsd.org Subject: Re: 8-STABLE interrupt storm on atapci(?), Dell Inspiron 580 Message-ID: <20100312182134.GA90606@fasterix.frmug.org> In-Reply-To: <20100312174655.GG16314@michelle.cdnetworks.com> References: <20100312121409.GA79294@fasterix.frmug.org> <20100312174655.GG16314@michelle.cdnetworks.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--a8Wt8u1KmwUX3Y2C
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
On Fri, Mar 12, 2010 at 09:46:55AM -0800, Pyun YongHyeon wrote:
> This is not related with your interrupt storm issue but something
> is wrong here. I think brgphy(4) should be used for bge(4). Have no
> idea why the OUI has a different value.
> Would you try attached patch and let me know whether brgphy(4)
> get attached to the PHY?
It sort of works (see attached dmesg) but not quite correctly, the
ethernet link takes an awful lot of time to negotiate (> 10s) and
it negotiates 10 Mbps instead of 100 Mbps previously.
The message "Unrecognized OUI for PHY!" seems to indicate something's
amiss, maybe I should regenerate some file(s) after applying your
patches?
--
Pierre Beyssac pb@fasterix.frmug.org
--a8Wt8u1KmwUX3Y2C
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.out"
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-STABLE #1: Fri Mar 12 19:02:49 CET 2010
root@inspiron:/usr/src/sys/amd64/compile/INSP580 amd64
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80a2b000.
Preloaded elf obj module "/boot/kernel/ehci.ko" at 0xffffffff80a2b240.
Preloaded elf obj module "/boot/kernel/usb.ko" at 0xffffffff80a2b868.
Preloaded elf obj module "/boot/kernel/ukbd.ko" at 0xffffffff80a2bf10.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2659996160 Hz
CPU: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz (2660.00-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x106e5 Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 8589934592 (8192 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000a5f000 - 0x00000000bd77ffff, 3167883264 bytes (773409 pages)
0x0000000100000000 - 0x000000022f12ffff, 5084741632 bytes (1241392 pages)
avail memory = 8210993152 (7830 MB)
ACPI APIC Table: <DELL FX09 >
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 6 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
cpu2 (AP): APIC ID: 4
cpu3 (AP): APIC ID: 6
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
APIC: CPU 2 has ACPI ID 3
APIC: CPU 3 has ACPI ID 4
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ACPI: RSDP 0xf9b00 00024 (v2 ACPIAM)
ACPI: XSDT 0xbd780100 0006C (v1 DELL FX09 20091130 MSFT 00000097)
ACPI: FACP 0xbd780290 000F4 (v4 DELL FX09 20091130 MSFT 00000097)
ACPI: DSDT 0xbd780660 05B02 (v2 1AAAA 1AAAA000 00000000 INTL 20051117)
ACPI: FACS 0xbd78e000 00040
ACPI: APIC 0xbd780390 0008C (v2 DELL FX09 20091130 MSFT 00000097)
ACPI: MCFG 0xbd780420 0003C (v1 DELL OEMMCFG 20091130 MSFT 00000097)
ACPI: SLIC 0xbd780460 00176 (v1 DELL FX09 20091130 MSFT 00000097)
ACPI: OSFR 0xbd7805e0 00080 (v1 DELL FX09 20091130 MSFT 00000097)
ACPI: OEMB 0xbd78e040 00072 (v1 DELL FX09 20091130 MSFT 00000097)
ACPI: HPET 0xbd78a660 00038 (v1 DELL OEMHPET 20091130 MSFT 00000097)
ACPI: ASF! 0xbd78a6a0 00099 (v32 LEGEND I865PASF 00000001 INTL 20051117)
ACPI: SSDT 0xbd78f6f0 00363 (v1 DpgPmm CpuPm 00000012 INTL 20051117)
MADT: Found IO APIC ID 7, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 7
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010400
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
VESA: information block
0000 56 45 53 41 00 03 f0 01 00 c0 01 00 00 00 44 00
0010 00 01 00 01 0f 0c 29 01 00 c0 bb 00 00 c0 3a 4d
0020 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0040 00 00 00 00 00 01 01 01 03 01 05 01 07 01 10 01
0050 11 01 13 01 14 01 16 01 17 01 19 01 1a 01 0d 01
0060 0e 01 20 01 93 01 95 01 96 01 b3 01 b5 01 b6 01
0070 c3 01 c5 01 c6 01 33 01 35 01 36 01 53 01 55 01
0080 56 01 63 01 65 01 66 01 21 01 22 01 23 01 24 01
0090 43 01 45 01 46 01 73 01 75 01 76 01 83 01 85 01
00a0 86 01 d3 01 d5 01 d6 01 e3 01 e5 01 e6 01 ff ff
00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0100 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0110 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0120 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0130 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0140 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0160 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0190 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 53 mode(s) found
VESA: v3.0, 16384k memory, flags:0x1, mode table:0xffffff8000099044 (1000044)
VESA: ATI ATOMBIOS
VESA: (C) 1988-2005, ATI Technologies Inc. CEDAR 01.00
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
acpi0: <DELL FX09 > on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xffffff800001b000 pa 0x4000
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.IELK.RXA0 -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.FHR0 -> bus 0 dev 31 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIX0 -> bus 0 dev 31 func 0
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bdf00000 (3) failed
ACPI timer: 1/1 1/1 1/1 1/1 0/225 1/1 1/1 1/1 1/1 1/1 -> 9
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI: SSDT 0xbd78e0c0 01130 (v1 DpgPmm P001Ist 00000011 INTL 20051117)
ACPI: SSDT 0xbd78f1f0 004F4 (v1 PmRef P001Cst 00003001 INTL 20051117)
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 6 7 10 11 12 14 15
Validation 0 10 N 0 3 4 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 5
Validation 0 5 N 0 5
After Disable 0 255 N 0 5
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 3 N 0 3 4 6 7 10 11 12 14 15
Validation 0 3 N 0 3 4 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 6 7 10 11 12 14 15
Validation 0 11 N 0 3 4 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 15 N 0 3 4 6 7 10 11 12 14 15
Validation 0 15 N 0 3 4 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 14 N 0 3 4 6 7 10 11 12 14 15
Validation 0 14 N 0 3 4 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 8 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0xd131, revid=0x11
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0xd138, revid=0x11
domain=0, bus=0, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0xd155, revid=0x11
domain=0, bus=0, slot=8, func=0
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0xd156, revid=0x11
domain=0, bus=0, slot=8, func=1
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0xd157, revid=0x11
domain=0, bus=0, slot=8, func=2
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0xd158, revid=0x11
domain=0, bus=0, slot=8, func=3
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0xd150, revid=0x11
domain=0, bus=0, slot=16, func=0
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0xd151, revid=0x11
domain=0, bus=0, slot=16, func=1
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3b64, revid=0x06
domain=0, bus=0, slot=22, func=0
class=07-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfbdfe000, size 4, enabled
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3b3c, revid=0x06
domain=0, bus=0, slot=26, func=0
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfbdfc000, size 10, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfbdfc000
found-> vendor=0x8086, dev=0x3b56, revid=0x06
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=15
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfbdf8000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found-> vendor=0x8086, dev=0x3b42, revid=0x06
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0104, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x3b4c, revid=0x06
domain=0, bus=0, slot=28, func=5
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0106, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3b34, revid=0x06
domain=0, bus=0, slot=29, func=0
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=14
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfbdf6000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfbdf6000
found-> vendor=0x8086, dev=0x244e, revid=0xa6
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0104, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3b08, revid=0x06
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3b20, revid=0x06
domain=0, bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xdc00, size 3, enabled
map[14]: type I/O Port, range 32, base 0xd880, size 2, enabled
map[18]: type I/O Port, range 32, base 0xd800, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xd480, size 2, enabled
map[20]: type I/O Port, range 32, base 0xd400, size 4, enabled
map[24]: type I/O Port, range 32, base 0xd080, size 4, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x3b30, revid=0x06
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=3
map[10]: type Memory, range 64, base 0xfbdf4000, size 8, enabled
map[20]: type I/O Port, range 32, base 0x400, size 5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x3b26, revid=0x06
domain=0, bus=0, slot=31, func=5
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xcc00, size 3, enabled
map[14]: type I/O Port, range 32, base 0xc880, size 2, enabled
map[18]: type I/O Port, range 32, base 0xc800, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xc480, size 2, enabled
map[20]: type I/O Port, range 32, base 0xc400, size 4, enabled
map[24]: type I/O Port, range 32, base 0xc080, size 4, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xefff
pcib1: memory decode 0xfbe00000-0xfbefffff
pcib1: prefetched decode 0xd0000000-0xdfffffff
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P3 - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1002, dev=0x68f9, revid=0x00
domain=0, bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
pcib1: requested memory range 0xd0000000-0xdfffffff: good
map[18]: type Memory, range 64, base 0xfbee0000, size 17, enabled
pcib1: requested memory range 0xfbee0000-0xfbefffff: good
map[20]: type I/O Port, range 32, base 0xe000, size 8, enabled
pcib1: requested I/O range 0xe000-0xe0ff: in range
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
found-> vendor=0x1002, dev=0xaa68, revid=0x00
domain=0, bus=1, slot=0, func=1
class=04-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfbebc000, size 14, enabled
pcib1: requested memory range 0xfbebc000-0xfbebffff: good
pcib0: matched entry for 0.3.INTB
pcib0: slot 3 INTB hardwired to IRQ 17
pcib1: slot 0 INTB is routed to irq 17
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0xfbee0000-0xfbefffff irq 16 at device 0.0 on pci1
pci1: <multimedia, HDA> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 8.0 (no driver attached)
pci0: <base peripheral> at device 8.1 (no driver attached)
pci0: <base peripheral> at device 8.2 (no driver attached)
pci0: <base peripheral> at device 8.3 (no driver attached)
pci0: <base peripheral> at device 16.0 (no driver attached)
pci0: <base peripheral> at device 16.1 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xfbdfc000-0xfbdfc3ff irq 16 at device 26.0 on pci0
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 49
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus0: EHCI version 1.0
usbus0: <Intel PCH USB 2.0 controller USB-B> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x0-0x0
pcib2: no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x0-0x0
pcib3: memory decode 0xfbf00000-0xfbffffff
pcib3: no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
found-> vendor=0x14e4, dev=0x1691, revid=0x01
domain=0, bus=3, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfbff0000, size 16, enabled
pcib3: requested memory range 0xfbff0000-0xfbffffff: good
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 17
bge0: <Broadcom BCM57780 A1, ASIC rev. 0x57780001> mem 0xfbff0000-0xfbffffff irq 17 at device 0.0 on pci3
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfbff0000
bge0: adjust device control 0x2000 -> 0x5000
bge0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 50
bge0: using IRQ 256 for MSI
bge0: CHIP ID 0x57780001; ASIC REV 0x57780; CHIP REV 0x577800; PCI-E
bge0: Disabling fastboot
bge0: Disabling fastboot
miibus0: <MII bus> on bge0
brgphy0: <BCM57780 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x00d897, model 0x0019, rev. 1
brgphy0: Unrecognized OUI for PHY!
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:25:64:f4:27:26
bge0: [MPSAFE]
bge0: [FILTER]
ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xfbdf6000-0xfbdf63ff irq 23 at device 29.0 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 51
ehci1: [MPSAFE]
ehci1: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <Intel PCH USB 2.0 controller USB-A> on ehci1
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0x0-0x0
pcib4: no prefetched decode
pcib4: Subtractively decoded bridge.
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PCH SATA300 controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f,0xd080-0xd08f irq 19 at device 31.2 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd400
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 52
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: Reserved 0x10 bytes for rid 0x24 type 4 at 0xd080
ata2: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xdc00
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd880
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xd800
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xd480
ata3: reset tp1 mask=01 ostat0=00 ostat1=00
ata3: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata3: reset tp2 stat0=00 stat1=00 devices=0x10000
ata3: [MPSAFE]
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci1: <Intel PCH SATA300 controller> port 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc40f,0xc080-0xc08f irq 19 at device 31.5 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc400
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0xc080
ata4: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xcc00
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xc880
ata4: reset tp1 mask=01 ostat0=7f ostat1=00
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: reset tp2 stat0=ff stat1=00 devices=0x0
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xc800
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xc480
ata5: reset tp1 mask=01 ostat0=7f ostat1=00
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: reset tp2 stat0=ff stat1=00 devices=0x0
ata5: [MPSAFE]
ata5: [ITHREAD]
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
isa_probe_children: disabling PnP devices
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 53
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0065
psm0: failed to reset the aux device.
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: Invalid id16 (set, cur) = (19, 20)
est0: Can't check freq 2533, it may be invalid
est0: Invalid id16 (set, cur) = (18, 20)
est0: Can't check freq 2400, it may be invalid
est0: Invalid id16 (set, cur) = (17, 20)
est0: Can't check freq 2267, it may be invalid
est0: Invalid id16 (set, cur) = (16, 20)
est0: Can't check freq 2133, it may be invalid
est0: Invalid id16 (set, cur) = (15, 20)
est0: Can't check freq 2000, it may be invalid
est0: Invalid id16 (set, cur) = (14, 20)
est0: Can't check freq 1867, it may be invalid
est0: Invalid id16 (set, cur) = (13, 20)
est0: Can't check freq 1733, it may be invalid
est0: Invalid id16 (set, cur) = (12, 20)
est0: Can't check freq 1600, it may be invalid
est0: Invalid id16 (set, cur) = (11, 20)
est0: Can't check freq 1467, it may be invalid
est0: Invalid id16 (set, cur) = (10, 20)
est0: Can't check freq 1333, it may be invalid
est0: Invalid id16 (set, cur) = (9, 20)
est0: Can't check freq 1200, it may be invalid
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est1: Invalid id16 (set, cur) = (19, 20)
est1: Can't check freq 2533, it may be invalid
est1: Invalid id16 (set, cur) = (18, 20)
est1: Can't check freq 2400, it may be invalid
est1: Invalid id16 (set, cur) = (17, 20)
est1: Can't check freq 2267, it may be invalid
est1: Invalid id16 (set, cur) = (16, 20)
est1: Can't check freq 2133, it may be invalid
est1: Invalid id16 (set, cur) = (15, 20)
est1: Can't check freq 2000, it may be invalid
est1: Invalid id16 (set, cur) = (14, 20)
est1: Can't check freq 1867, it may be invalid
est1: Invalid id16 (set, cur) = (13, 20)
est1: Can't check freq 1733, it may be invalid
est1: Invalid id16 (set, cur) = (12, 20)
est1: Can't check freq 1600, it may be invalid
est1: Invalid id16 (set, cur) = (11, 20)
est1: Can't check freq 1467, it may be invalid
est1: Invalid id16 (set, cur) = (10, 20)
est1: Can't check freq 1333, it may be invalid
est1: Invalid id16 (set, cur) = (9, 20)
est1: Can't check freq 1200, it may be invalid
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est2: Invalid id16 (set, cur) = (19, 20)
est2: Can't check freq 2533, it may be invalid
est2: Invalid id16 (set, cur) = (18, 20)
est2: Can't check freq 2400, it may be invalid
est2: Invalid id16 (set, cur) = (17, 20)
est2: Can't check freq 2267, it may be invalid
est2: Invalid id16 (set, cur) = (16, 20)
est2: Can't check freq 2133, it may be invalid
est2: Invalid id16 (set, cur) = (15, 20)
est2: Can't check freq 2000, it may be invalid
est2: Invalid id16 (set, cur) = (14, 20)
est2: Can't check freq 1867, it may be invalid
est2: Invalid id16 (set, cur) = (13, 20)
est2: Can't check freq 1733, it may be invalid
est2: Invalid id16 (set, cur) = (12, 20)
est2: Can't check freq 1600, it may be invalid
est2: Invalid id16 (set, cur) = (11, 20)
est2: Can't check freq 1467, it may be invalid
est2: Invalid id16 (set, cur) = (10, 20)
est2: Can't check freq 1333, it may be invalid
est2: Invalid id16 (set, cur) = (9, 20)
est2: Can't check freq 1200, it may be invalid
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est3: Invalid id16 (set, cur) = (19, 20)
est3: Can't check freq 2533, it may be invalid
est3: Invalid id16 (set, cur) = (18, 20)
est3: Can't check freq 2400, it may be invalid
est3: Invalid id16 (set, cur) = (17, 20)
est3: Can't check freq 2267, it may be invalid
est3: Invalid id16 (set, cur) = (16, 20)
est3: Can't check freq 2133, it may be invalid
est3: Invalid id16 (set, cur) = (15, 20)
est3: Can't check freq 2000, it may be invalid
est3: Invalid id16 (set, cur) = (14, 20)
est3: Can't check freq 1867, it may be invalid
est3: Invalid id16 (set, cur) = (13, 20)
est3: Can't check freq 1733, it may be invalid
est3: Invalid id16 (set, cur) = (12, 20)
est3: Can't check freq 1600, it may be invalid
est3: Invalid id16 (set, cur) = (11, 20)
est3: Can't check freq 1467, it may be invalid
est3: Invalid id16 (set, cur) = (10, 20)
est3: Can't check freq 1333, it may be invalid
est3: Invalid id16 (set, cur) = (9, 20)
est3: Can't check freq 1200, it may be invalid
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Device configuration finished.
Reducing kern.maxvnodes 509903 -> 100000
procfs registered
lapic: Divisor 2, Frequency 66499904 Hz
Timecounter "TSC" frequency 2659996160 Hz quality -100
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
lo0: bpf attached
ata2: Identifying devices: 00000001
ata2: New devices: 00000001
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: setting UDMA100
ad4: 953869MB <Seagate ST31000528AS CC45> at ata2-master UDMA100 SATA 3Gb/s
ad4: 1953525168 sectors [1938021C/16H/63S] 16 sectors/interrupt 1 depth queue
ata3: Identifying devices: 00010000
ata3: New devices: 00010000
GEOM: new disk ad4
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
acd0: setting UDMA100
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
acd0: <PLDS DVDRW/BDROM DH-6E2S/7D12> DVDR drive at ata3 as master
acd0: read 8269KB/s (8269KB/s) write 8269KB/s (8269KB/s), 2048KB buffer, UDMA100 SATA 1.5Gb/s
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata4: Identifying devices: 00000000
ata4: New devices: 00000000
ata5: Identifying devices: 00000000
ata5: New devices: 00000000
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x06000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x04000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x02000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 2 vector 48
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 4 vector 48
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 6 vector 48
msi: Assigning MSI IRQ 256 to local APIC 2 vector 49
WARNING: WITNESS option enabled, expect reduced performance.
GEOM: ad4: partition 3 does not start on a track boundary.
GEOM: ad4: partition 3 does not end on a track boundary.
GEOM: ad4: partition 2 does not start on a track boundary.
GEOM: ad4: partition 2 does not end on a track boundary.
Root mount waiting for: usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1
Root mount waiting for: usbus1 usbus0
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen0.3: <Dell> at usbus0
ukbd0: <Dell Dell USB Entry Keyboard, class 0/0, rev 1.10/1.78, addr 3> on usbus0
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
ugen1.3: <Generic> at usbus1
Trying to mount root from ufs:/dev/ufs/root
ct_to_ts([2010-03-12 18:17:33]) = 1268417853.000000000
start_init: trying /sbin/init
bge0: Disabling fastboot
bge0: Disabling fastboot
--a8Wt8u1KmwUX3Y2C--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20100312182134.GA90606>